Stripping aluminum tail panel help - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum Stripping aluminum tail panel help

Print Thread

Stripping aluminum tail panel help #2782238 06/06/20 07:52 PM 06/06/20 07:52 PM
Joined: Jul 2015 Posts: 299 Chicago adjacent WS68SSC OP Newest
WS68SSC OP Newest Joined: Jul 2015 Posts: 299 Chicago adjacent	I want to remove old spray paint from my 1969 Dodge Super Bee aluminum tail panel. Any advice on what to use without damaging the panel?

Re: Stripping aluminum tail panel help [Re: WS68SSC] #2782243 06/06/20 08:07 PM 06/06/20 08:07 PM
Joined: Jan 2003 Posts: 4,114 MD floyd master
floyd master Joined: Jan 2003 Posts: 4,114 MD	I’ve had pretty decent luck with this stuff. Most hardware store strippers are ineffective now IMO. https://www.rustoleum.com/product-c.../removers-and-chemicals/aircraft-remover

Re: Stripping aluminum tail panel help [Re: floyd] #2782252 06/06/20 08:27 PM 06/06/20 08:27 PM
Joined: Jan 2003 Posts: 20,460 Eagle, Idaho Neil The Doctor is in.
Neil The Doctor is in. Joined: Jan 2003 Posts: 20,460 Eagle, Idaho	Maybe some acetone or carb cleaner? I've cleaned anodized bike parts with carb cleaner and it does not do anything to the finish as far as I can see.

Re: Stripping aluminum tail panel help [Re: WS68SSC] #2782361 06/07/20 11:51 AM 06/07/20 11:51 AM
Joined: Aug 2015 Posts: 20 St. Petersburg, Florida BillyBee member
BillyBee member Joined: Aug 2015 Posts: 20 St. Petersburg, Florida	I have had good luck with this: Stipper I used it recently on my 1970 Challenger grille and headlight bezels to remove the paint only. Does not affect the anodization or aluminum. 1970 Challenger T/A, 4-speed, EV2 1969 Super Bee, 383 / 4-speed, F8 triple green 1968 Firebird 400 / 4-speed, triple black

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1