Previous Thread
Next Thread
Print Thread
Holley Fuel Lines? #2780660
06/02/20 11:50 AM
06/02/20 11:50 AM
Joined: Jan 2003
Posts: 6,221
JERSEY
RJS Offline OP
master
RJS  Offline OP
master

Joined: Jan 2003
Posts: 6,221
JERSEY
Years ago Fabulous Fabrications used to make these fuel lines, you had many choices too like 5/16" Vacuum sec. or double pump. He also made them in 3/8" as shown.
Is there a source for them now???

yes I know I can fab. myself but would rather buy a 5/16" for a Vacuum sec. Holley outright.
Thanks Ron

Holley fuel line.JPG
Last edited by RJS; 06/02/20 11:51 AM.
Re: Holley Fuel Lines? [Re: RJS] #2780675
06/02/20 12:19 PM
06/02/20 12:19 PM
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
Mr.Yuck Offline
Not enough dumb comments...yet
Mr.Yuck  Offline
Not enough dumb comments...yet

Joined: Jan 2003
Posts: 24,562
Brookeville, Md
I think Summit sells various kits.

Re: Holley Fuel Lines? [Re: Mr.Yuck] #2780747
06/02/20 02:36 PM
06/02/20 02:36 PM
Joined: Jan 2003
Posts: 6,221
JERSEY
RJS Offline OP
master
RJS  Offline OP
master

Joined: Jan 2003
Posts: 6,221
JERSEY
I didn't find anything that had the stockish look like these.

Ron

Re: Holley Fuel Lines? [Re: RJS] #2780985
06/03/20 09:50 AM
06/03/20 09:50 AM
Joined: Jan 2003
Posts: 1,788
Greer, SC
TooMany62s Offline
top fuel
TooMany62s  Offline
top fuel

Joined: Jan 2003
Posts: 1,788
Greer, SC
I had that setup on my 440 powered truck. It looks great and works great. I personally don't like a lot of rubber fuel lines under the hood.

Re: Holley Fuel Lines? [Re: TooMany62s] #2780998
06/03/20 10:19 AM
06/03/20 10:19 AM
Joined: Dec 2013
Posts: 4,651
Wichita
G
GY3 Offline
master
GY3  Offline
master
G

Joined: Dec 2013
Posts: 4,651
Wichita
Yep, too bad those are not longer made. I've ran the Fabulous Fabrication stuff on multiple cars and they worked really well.


'63 Dodge 330
11.19 @ 121 mph
Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs.
10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.

Re: Holley Fuel Lines? [Re: GY3] #2781000
06/03/20 10:22 AM
06/03/20 10:22 AM
Joined: Jan 2003
Posts: 6,221
JERSEY
RJS Offline OP
master
RJS  Offline OP
master

Joined: Jan 2003
Posts: 6,221
JERSEY
Yep The Right stuff makes something close but no cigar. They make it in 3/8" which isn't what I' after with a block that's designed for GM engines so I started to make my own and will a buddy complete what I need coming up from the filter.
Ron







Powered by UBB.threads™ PHP Forum Software 7.7.1