Hey all,

I’m looking for the b pillar interior trim/wind lace?? Not sure of the exact name but it goes on the pinch weld of either side of the pillar. Thanks

There are 2 different types on Coupes:

1. The usual type at the door edge, widely available.
2. The short length next to the glass, which is what I think you're asking about.
That one has a deeper "flap" to close off the glass hinge area.
Otherwise, same pebble-grain texture & color as the other one.
If you can't find it at Dante's, YearOne, Classic Industries, etc, try restorationspecialties.com

Most folks call it windlace when that kind of molding is applied to cars, no worries there.

No one makes that specifically for Mopars. The same thing was used around the back window on 68-70 B bodies. Basically the same as the pinch weld trim that goes down the door opening but with a "wing" off one side to hide a gap.

You can buy that pinch weld with the "wing" on Cheby websites. It was used on 69-70 Chevelles for the rear window interior trim.

You're welcome

Yes the deep side. So the door side is just like the lower windlace then, good deal.

Sweet I’ll have to take a look, does the chevy one need to trimmed at all or is a direct fit?