Previous Thread
Next Thread
Print Thread
Need help. need pics #2765347
04/18/20 05:07 AM
04/18/20 05:07 AM
Joined: May 2010
Posts: 59
Rhode Island
Caparco Offline OP
member
Caparco  Offline OP
member

Joined: May 2010
Posts: 59
Rhode Island
Does anyone out there have a edlebrok 600 Carb?. I would love a picture to see how the throttle and the throttle return spring are mounted.


~ 72 Dodge Challenger ~
~ 97 Dodge Neon ~
~ 97 Dodge Ram ~
Re: Need help. need pics [Re: Caparco] #2765416
04/18/20 10:42 AM
04/18/20 10:42 AM
Joined: Jan 2003
Posts: 20,645
So Near, Yet So Far
topside Offline
Too Many Posts
topside  Offline
Too Many Posts

Joined: Jan 2003
Posts: 20,645
So Near, Yet So Far
Should find photos at the Edelbrock and Summit and Jeg's sites.
You need the Mopar throttle arm adapter; then the hookup is obvious.
This assumes the rest of your combo (cable, bracket) is stock.

Re: Need help. need pics [Re: topside] #2765556
04/18/20 04:41 PM
04/18/20 04:41 PM
Joined: Aug 2006
Posts: 2,487
God's Country Maryland
GODSCOUNTRY340 Offline
top fuel
GODSCOUNTRY340  Offline
top fuel

Joined: Aug 2006
Posts: 2,487
God's Country Maryland
Here.

0CC7349F-6BB0-4C61-9282-8CB36C9E0983.jpegAE5585E1-065B-4EF7-AED0-E8DC86FA28CB.jpegF27CAA5E-4020-42DD-8573-4A584B41785A.jpeg

I love the smell of Deer guts in the morning, it smells like... VICTORY!
Re: Need help. need pics [Re: GODSCOUNTRY340] #2765570
04/18/20 05:15 PM
04/18/20 05:15 PM
Joined: Jan 2003
Posts: 3,920
n.e. pa.
6
65rbdodge Offline
master
65rbdodge  Offline
master
6

Joined: Jan 2003
Posts: 3,920
n.e. pa.
Hope it helps

4C67E3DC-2771-460B-901B-211246A75A81.jpeg
Re: Need help. need pics [Re: 65rbdodge] #2765639
04/18/20 07:58 PM
04/18/20 07:58 PM
Joined: Mar 2006
Posts: 9,791
MI, usa
dvw Offline
master
dvw  Offline
master

Joined: Mar 2006
Posts: 9,791
MI, usa
Though this a Magnum the brackets and linkage are 1968. The extension for the throttle pressure linkage is a piece of 1/4" brass pipe. The threaded ends were cut off. Then it was threaded internally to match the threads of the linkage. The original rod was shortened slightly. Then the adaper was threaded into the front portion with a 1/2" long piece of a cut off bolt. Drilled one hole for the spring so it tucks under the carb to the rear. Made a slight extension for the cable as well.
Doug

20200323_171321.jpg20200323_171300.jpg
Re: Need help. need pics [Re: dvw] #2766212
04/20/20 09:09 AM
04/20/20 09:09 AM
Joined: Jan 2003
Posts: 2,252
New York
rarefish Offline
top fuel
rarefish  Offline
top fuel

Joined: Jan 2003
Posts: 2,252
New York
Here is my setup using the Lokar cables.

P1040137.JPG
Re: Need help. need pics [Re: dvw] #2770003
04/30/20 11:22 PM
04/30/20 11:22 PM
Joined: Jan 2003
Posts: 2,271
central IL reg Nov 18, 1999
Stroker Offline
top fuel
Stroker  Offline
top fuel

Joined: Jan 2003
Posts: 2,271
central IL reg Nov 18, 1999
Originally Posted by dvw
Though this a Magnum the brackets and linkage are 1968. The extension for the throttle pressure linkage is a piece of 1/4" brass pipe. The threaded ends were cut off. Then it was threaded internally to match the threads of the linkage. The original rod was shortened slightly. Then the adaper was threaded into the front portion with a 1/2" long piece of a cut off bolt. Drilled one hole for the spring so it tucks under the carb to the rear. Made a slight extension for the cable as well.
Doug


That plating/coating on your throttle bracket sure looks nice.
What is it?



Re: Need help. need pics [Re: Stroker] #2770034
05/01/20 07:50 AM
05/01/20 07:50 AM
Joined: Mar 2006
Posts: 9,791
MI, usa
dvw Offline
master
dvw  Offline
master

Joined: Mar 2006
Posts: 9,791
MI, usa
Had the linkage done at the same time as the headers. Same coating.
https://www.qccoatings.com/
Doug

Re: Need help. need pics [Re: dvw] #2771967
05/07/20 12:04 AM
05/07/20 12:04 AM
Joined: Jan 2003
Posts: 2,271
central IL reg Nov 18, 1999
Stroker Offline
top fuel
Stroker  Offline
top fuel

Joined: Jan 2003
Posts: 2,271
central IL reg Nov 18, 1999
Originally Posted by dvw
Had the linkage done at the same time as the headers. Same coating.
https://www.qccoatings.com/
Doug


Thanks, and they're not in California.
That's almost local!









Powered by UBB.threads™ PHP Forum Software 7.7.1