Hemi block engine mount - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Hemi block engine mount

Print Thread

Page 2 of 2

1

2

Re: Hemi block engine mount [Re: Dragula] #2761084 04/07/20 12:10 PM 04/07/20 12:10 PM
Joined: Dec 2006 Posts: 2,105 Byron, NY W.I.N. Racing top fuel
W.I.N. Racing top fuel Joined: Dec 2006 Posts: 2,105 Byron, NY	Originally Posted by Dragula Love it when people buy race parts and then expect to use them like stock factory parts... Randy I was right there with you but in these trying times I used my social distancing...but if they complain about power steering the mask comes off. '01 P1500, Blown/Inj BAE,/Veney ,Bruno/CS2,Dana 60 '01 Dodge 3500 S Cummins Auto, Fresh air kit, 4" Exhaust, '05 Dodge Magnum R/T - Too Much to list '60 Willys CJ5 '01 International LPX - Project,DT466, Allison '64 Plymouth Valiant, Inj 528 Hemi, 2spd

Re: Hemi block engine mount [Re: 440Jim] #2763978 04/14/20 07:41 PM 04/14/20 07:41 PM
Joined: Jun 2009 Posts: 1,212 QLD Australia Keith Black® pro stock
Keith Black® pro stock Joined: Jun 2009 Posts: 1,212 QLD Australia	Originally Posted by 440Jim Interesting. The block I bought in 2014 had three mount holes to clear the double side bolts for the main caps. These are my measurements, FWIW. 440Jim you are correct. The mounts are in the factory location with the exception of the top bolt which is slightly lower. This is so it doesn't go into the main oil galley. Most modify a stock mount bracket to fit. Also, we are making brackets now (about to trial fit) that will be available. -------------------------------- Darren Beale Keith Black Racing Engines®

Re: Hemi block engine mount [Re: Keith Black®] #2764078 04/15/20 05:39 AM 04/15/20 05:39 AM
Joined: Mar 2005 Posts: 1,581 N/E, Michigan RATTRAP pro stock
RATTRAP pro stock Joined: Mar 2005 Posts: 1,581 N/E, Michigan	Also, we are making brackets now (about to trial fit) that will be available. Please let me know if and when or would be a set available for a 68 B-body. Last edited by RATTRAP; 04/15/20 05:40 AM.

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1