Re: QA1 K Member
[Re: Sammy]
#2736109
01/24/20 01:15 PM
01/24/20 01:15 PM
|
Joined: Dec 2018
Posts: 53 Northern Bavaria / Germany
MichaelF
member
|
member
Joined: Dec 2018
Posts: 53
Northern Bavaria / Germany
|
Hi,
the QA1 K-Member is a stock replacement part.....a little more room for headers, maybe a Little lighter, i think a bit stiffer, too. It still uses the Torsion bars, and a rack and pinion steering is not a bolt-on deal.
Michael
Last edited by MichaelF; 01/24/20 01:15 PM.
|
|
|
Re: QA1 K Member
[Re: MichaelF]
#2736286
01/24/20 08:31 PM
01/24/20 08:31 PM
|
Joined: Dec 2012
Posts: 1,823 Wind Gap,Pa.
Sammy
OP
top fuel
|
OP
top fuel
Joined: Dec 2012
Posts: 1,823
Wind Gap,Pa.
|
Hi,
the QA1 K-Member is a stock replacement part.....a little more room for headers, maybe a Little lighter, i think a bit stiffer, too. It still uses the Torsion bars, and a rack and pinion steering is not a bolt-on deal.
Michael It looks like the old CAP K member. IIRC didnt the CAP K Member has provisions for a rack n pinion?
|
|
|
Re: QA1 K Member
[Re: J_BODY]
#2736405
01/25/20 08:02 AM
01/25/20 08:02 AM
|
Joined: Dec 2012
Posts: 1,823 Wind Gap,Pa.
Sammy
OP
top fuel
|
OP
top fuel
Joined: Dec 2012
Posts: 1,823
Wind Gap,Pa.
|
Since you’re in PA.... have you checked Tory Shelhammer’s tube K out? Appears to be a nice piece and priced right. Was on a drag week class winner in 2019 I saw that. I want a rack n pinion but still use my torsion bars like the old CAP K member. Does anyone make one like that anymore?
|
|
|
Re: QA1 K Member
[Re: Sammy]
#2736749
01/26/20 12:10 PM
01/26/20 12:10 PM
|
Joined: Sep 2003
Posts: 421 montana
BANDIT
mopar
|
mopar
Joined: Sep 2003
Posts: 421
montana
|
I’ll. Sell you my old DARE one. Lol.
64 Dodge Coronet 440. In progress 1998. Dodge Avenger. 8.35@165. 4400 DA 250” Neil and Parks Slip Joint. 7.36@183. 4600 DA 242" Mullis Dragster. 6.90@ 200mph
|
|
|
Re: QA1 K Member
[Re: BANDIT]
#2736778
01/26/20 01:55 PM
01/26/20 01:55 PM
|
Joined: Dec 2012
Posts: 1,823 Wind Gap,Pa.
Sammy
OP
top fuel
|
OP
top fuel
Joined: Dec 2012
Posts: 1,823
Wind Gap,Pa.
|
I’ll. Sell you my old DARE one. Lol. What's a DARE setup look like?
|
|
|
Re: QA1 K Member
[Re: Sammy]
#2736822
01/26/20 03:59 PM
01/26/20 03:59 PM
|
Joined: Dec 2005
Posts: 11,498 Fulton County, PA
CMcAllister
Mr. Helpful
|
Mr. Helpful
Joined: Dec 2005
Posts: 11,498
Fulton County, PA
|
I’ll. Sell you my old DARE one. Lol. What's a DARE setup look like?
If the results don't match the theory, change the theory.
|
|
|
Re: QA1 K Member
[Re: CMcAllister]
#2737077
01/27/20 02:13 PM
01/27/20 02:13 PM
|
Joined: Sep 2003
Posts: 421 montana
BANDIT
mopar
|
mopar
Joined: Sep 2003
Posts: 421
montana
|
Haha, yup he knows. Wonder if that joker is still alive? Jim
64 Dodge Coronet 440. In progress 1998. Dodge Avenger. 8.35@165. 4400 DA 250” Neil and Parks Slip Joint. 7.36@183. 4600 DA 242" Mullis Dragster. 6.90@ 200mph
|
|
|
Re: QA1 K Member
[Re: BANDIT]
#2737087
01/27/20 02:31 PM
01/27/20 02:31 PM
|
Joined: Jan 2003
Posts: 20,158 Park Forest, IL
slantzilla
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 20,158
Park Forest, IL
|
Haha, yup he knows. Wonder if that joker is still alive? Jim Dave Aydollette (sp). Went to his house one time to see what his stuff looked like before I bought an AJE. What a hack........ Unfortunately for me, the AJE stuff was just as big a piece of junk.
"Everybody funny, now you funny too."
|
|
|
Re: QA1 K Member
[Re: Sammy]
#2737438
01/28/20 02:51 PM
01/28/20 02:51 PM
|
Joined: Jan 2003
Posts: 2,915 A shed in England
Tig
master
|
master
Joined: Jan 2003
Posts: 2,915
A shed in England
|
I fitted one to our Challenger. Still has torsion bars and stock steering. I kinda like it. Though it does move the steering back some as now a lot of it fouls the headers but i believe it does improve bump steer. This is the only pic I have.
'74 Challenger..9.46 @ 145.9 1/4, 6.001 @ 118 1/8 so far. 4023lb !!! # N/A, Marsh performance 655ci, Indy Maxx, T/R, Indy 600-13 X's, Street legal, pump gas, full interior, Cal-Tracs, mufflers, 3:73's and real 10.5 radials. 9.51 @ 142.4 1/4, 6.003 @ 114 1/8 with our old mule KB, 572-13, 580 wedge. RHD '68 Barracuda Fastback 323ci street/strip. Best ET 13.88 @ 99.03
|
|
|
Re: QA1 K Member
[Re: Sammy]
#2737516
01/28/20 08:05 PM
01/28/20 08:05 PM
|
Joined: Dec 2013
Posts: 403 Romulus, MI
GTS340
mopar
|
mopar
Joined: Dec 2013
Posts: 403
Romulus, MI
|
Since you’re in PA.... have you checked Tory Shelhammer’s tube K out? Appears to be a nice piece and priced right. Was on a drag week class winner in 2019 I saw that. I want a rack n pinion but still use my torsion bars like the old CAP K member. Does anyone make one like that anymore? LRT?
|
|
|
|
|