'it took out the lifters' or 'cam'
#2734028
01/17/20 10:47 PM
01/17/20 10:47 PM
|
Joined: Nov 2006
Posts: 2,255 IL
furious70
OP
top fuel
|
OP
top fuel
Joined: Nov 2006
Posts: 2,255
IL
|
A couple used engines near me, 09 ram shortblock with a 'bad cam' 11 car longblock with 'bad lifters'
Supposedly no junk in the oil, what could be wrong yet not catastrophic in these engines or no such thing they're just cores to be rebuilt?
70 Sport Fury 68 Charger 69 Coronet 72 RR
|
|
|
Re: 'it took out the lifters' or 'cam'
[Re: furious70]
#2734073
01/18/20 06:11 AM
01/18/20 06:11 AM
|
Joined: Oct 2017
Posts: 80 Australia
aus370
member
|
member
Joined: Oct 2017
Posts: 80
Australia
|
A couple used engines near me, 09 ram shortblock with a 'bad cam' 11 car longblock with 'bad lifters'
Supposedly no junk in the oil, what could be wrong yet not catastrophic in these engines or no such thing they're just cores to be rebuilt? If you can't dismantle to inspect, best to assume it's a rebuilder. The one i got with one lobe gone, you could almost clean and re-assemble, if you were on a super budget. I found a heap of metallic paste on the magnetic part of the MDS solenoids : so you want to make sure to remove and inspect them.
Last edited by aus370; 01/18/20 06:36 AM.
|
|
|
Re: 'it took out the lifters' or 'cam'
[Re: aus370]
#2734090
01/18/20 09:56 AM
01/18/20 09:56 AM
|
Joined: Nov 2006
Posts: 2,255 IL
furious70
OP
top fuel
|
OP
top fuel
Joined: Nov 2006
Posts: 2,255
IL
|
yes MDS and VVT. What's a good core price on a short and then longblock? between the 2 I think there's only 1 set of rockers, valve covers, manifolds, etc.
70 Sport Fury 68 Charger 69 Coronet 72 RR
|
|
|
Re: 'it took out the lifters' or 'cam'
[Re: HotRodDave]
#2734290
01/18/20 07:30 PM
01/18/20 07:30 PM
|
Joined: Nov 2006
Posts: 2,255 IL
furious70
OP
top fuel
|
OP
top fuel
Joined: Nov 2006
Posts: 2,255
IL
|
Dave, do you do something different for lifters when u out in a 392 cam then?
70 Sport Fury 68 Charger 69 Coronet 72 RR
|
|
|
Re: 'it took out the lifters' or 'cam'
[Re: Neil]
#2735028
01/20/20 06:49 PM
01/20/20 06:49 PM
|
Joined: Nov 2006
Posts: 2,255 IL
furious70
OP
top fuel
|
OP
top fuel
Joined: Nov 2006
Posts: 2,255
IL
|
well, if Dave's data holds, what aftermarket lifter has as many road miles tested?
70 Sport Fury 68 Charger 69 Coronet 72 RR
|
|
|
Re: 'it took out the lifters' or 'cam'
[Re: L4staero]
#2735344
01/21/20 05:20 PM
01/21/20 05:20 PM
|
Joined: Nov 2006
Posts: 2,255 IL
furious70
OP
top fuel
|
OP
top fuel
Joined: Nov 2006
Posts: 2,255
IL
|
additionally revised to -AD now?
https://www.eastcoastmoparts.com/oem-parts/mopar-hydraulic-roller-lifter-rear-yoke-5038787ad?c=bD0yJm49U2VhcmNoIFJlc3VsdHMmYT1kb2RnZSZvPWNoYXJnZXImeT0yMDE4JnQ9ci10JmU9NS03bC12OC1nYXM%3D
70 Sport Fury 68 Charger 69 Coronet 72 RR
|
|
|
Re: 'it took out the lifters' or 'cam'
[Re: Wailin D]
#2735811
01/23/20 12:02 PM
01/23/20 12:02 PM
|
Joined: Sep 2003
Posts: 421 montana
BANDIT
mopar
|
mopar
Joined: Sep 2003
Posts: 421
montana
|
I just talked to Isky about the solid rollers in my race car, bearing ones are $900.00, bushed ones are $1250.00. Claim is 30-50% more life expectancy in bushed ones in my application. You have to decide from there. Those were Red Zones, also. Jim
64 Dodge Coronet 440. In progress 1998. Dodge Avenger. 8.35@165. 4400 DA 250” Neil and Parks Slip Joint. 7.36@183. 4600 DA 242" Mullis Dragster. 6.90@ 200mph
|
|
|
|
|