Barracuda Dash Emblem - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Barracuda Dash Emblem

Print Thread

Barracuda Dash Emblem #2733363 01/15/20 02:35 PM 01/15/20 02:35 PM
Joined: Feb 2003 Posts: 1,098 Massillon, Ohio C cudatom OP super stock
cudatom OP super stock C Joined: Feb 2003 Posts: 1,098 Massillon, Ohio	What is a good adhesive to use to affix a replacement Barracuda emblem. I don't see the push pins holding w/o an adhesive. Thanks Last edited by cudatom; 01/15/20 05:37 PM. Ok

Re: Barracuda Emblem [Re: cudatom] #2733379 01/15/20 03:23 PM 01/15/20 03:23 PM
Joined: Jan 2003 Posts: 32,918 Grand Prairie,Texas stumpy I Win
stumpy I Win Joined: Jan 2003 Posts: 32,918 Grand Prairie,Texas	There should be tube nuts that the push pins go into. https://www.ebay.com/itm/Barrel-Cli...etainer-Nuts-Ford-GM-Mopar/111929651912? You can get them at ACE hardware.

Re: Barracuda Emblem [Re: stumpy] #2733385 01/15/20 03:45 PM 01/15/20 03:45 PM
Joined: Oct 2006 Posts: 7,363 Iowa burdar Owen's Dad
burdar Owen's Dad Joined: Oct 2006 Posts: 7,363 Iowa	If you're set on using something else, there are "emblem adhesives" that you should be able to find at your local parts store.

Re: Barracuda Emblem [Re: burdar] #2733388 01/15/20 03:51 PM 01/15/20 03:51 PM
Joined: Jan 2003 Posts: 29,650 Hamtramck, PA A Alaskan_TA Fluffy Balladeer
Alaskan_TA Fluffy Balladeer A Joined: Jan 2003 Posts: 29,650 Hamtramck, PA	Interior like the small one on the dash of a '70 or exterior?

Re: Barracuda Emblem [Re: Alaskan_TA] #2733405 01/15/20 05:03 PM 01/15/20 05:03 PM
Joined: Feb 2003 Posts: 1,098 Massillon, Ohio C cudatom OP super stock
cudatom OP super stock C Joined: Feb 2003 Posts: 1,098 Massillon, Ohio	Sorry, yes it is for the dash. I thought I has said that but didn't. Sucks getting old. Ok

Re: Barracuda Emblem [Re: cudatom] #2733561 01/16/20 10:12 AM 01/16/20 10:12 AM
Joined: Oct 2006 Posts: 7,363 Iowa burdar Owen's Dad
burdar Owen's Dad Joined: Oct 2006 Posts: 7,363 Iowa	My 73 Challenger script had little plastic retainers on the back side but that had to be done before the vinyl was stretched over the dash frame. No way to do that with a replacement dash pad. Go to your local parts store and look for an emblem adhesive.

Re: Barracuda Emblem [Re: burdar] #2733625 01/16/20 02:14 PM 01/16/20 02:14 PM
Joined: Nov 2004 Posts: 1,923 Medina, Ohio HEMICUDA top fuel
HEMICUDA top fuel Joined: Nov 2004 Posts: 1,923 Medina, Ohio	Originally Posted by burdar My 73 Challenger script had little plastic retainers on the back side but that had to be done before the vinyl was stretched over the dash frame. No way to do that with a replacement dash pad. Go to your local parts store and look for an emblem adhesive. You are correct as always burdar, the emblem was installed in the vinyl before it was installed on the pad. I would also use black 3M emblem adhesive.

Re: Barracuda Emblem [Re: burdar] #2733759 01/16/20 09:37 PM 01/16/20 09:37 PM
Joined: Feb 2003 Posts: 1,098 Massillon, Ohio C cudatom OP super stock
cudatom OP super stock C Joined: Feb 2003 Posts: 1,098 Massillon, Ohio	Thank you Ok

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1