Fuel Pump Rod - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Fuel Pump Rod

Print Thread

Fuel Pump Rod #2732879 01/14/20 09:13 AM 01/14/20 09:13 AM
Joined: Jan 2003 Posts: 5,106 Chicago Blackhawks H hemicar1971 OP master
hemicar1971 OP master H Joined: Jan 2003 Posts: 5,106 Chicago Blackhawks	Was asked by a guy that has a Solid Roller Cam in his Hemi if he could use a stock fuel pump rod. I have never run anything but an Electric Fuel Pump with a Solid Roller Cam but his block you can use a fuel pump rod.. He was wondering if the fuel pump rod was compatible with the Roller Cam Shaft or if there is a fuel pump rod made just for a Solid Roller Cam. 1971 HEMI E BODY REGISTRY

Re: Fuel Pump Rod [Re: hemicar1971] #2732881 01/14/20 09:29 AM 01/14/20 09:29 AM
Joined: Oct 2006 Posts: 427 Sweden Mopar Guy mopar
Mopar Guy mopar Joined: Oct 2006 Posts: 427 Sweden	No he needs a brass tipp rod or he will ruin the cam !

Re: Fuel Pump Rod [Re: Mopar Guy] #2732884 01/14/20 09:40 AM 01/14/20 09:40 AM
Joined: Jan 2003 Posts: 5,106 Chicago Blackhawks H hemicar1971 OP master
hemicar1971 OP master H Joined: Jan 2003 Posts: 5,106 Chicago Blackhawks	Is there such a thing as a fuel rod for a solid roller and were would I tell him to get one. Never looked into this always just closed it off with a block off plate and ran a electric pump that could keep up with the fuel volume I needed. 1971 HEMI E BODY REGISTRY

Re: Fuel Pump Rod [Re: hemicar1971] #2732886 01/14/20 09:54 AM 01/14/20 09:54 AM
Joined: Jan 2003 Posts: 5,106 Chicago Blackhawks H hemicar1971 OP master
hemicar1971 OP master H Joined: Jan 2003 Posts: 5,106 Chicago Blackhawks	https://www.summitracing.com/int/parts/cca-4626 It looks like there is a fuel push rod for a Steel Solid Roller Cam Shaft. Thanks 1971 HEMI E BODY REGISTRY

Re: Fuel Pump Rod [Re: hemicar1971] #2732887 01/14/20 09:55 AM 01/14/20 09:55 AM
Joined: Mar 2006 Posts: 198 Maryland M mrob member
mrob member M Joined: Mar 2006 Posts: 198 Maryland	Comp makes one for B/RB engines. P/N 4646, has a bronze tip on one end.

Re: Fuel Pump Rod [Re: mrob] #2732891 01/14/20 10:06 AM 01/14/20 10:06 AM
Joined: Jan 2003 Posts: 13,566 md M mopars4ever I Live Here
mopars4ever I Live Here M Joined: Jan 2003 Posts: 13,566 md	I got to think they wouldn`t last long.

Re: Fuel Pump Rod [Re: mopars4ever] #2732896 01/14/20 10:32 AM 01/14/20 10:32 AM
Joined: Dec 2013 Posts: 4,663 Wichita G GY3 master
GY3 master G Joined: Dec 2013 Posts: 4,663 Wichita	Howards makes one. I've used it with my roller cam in the 505 and have over 7,000 miles on it. I had read bad reviews on the Comp one but they "disappeared" from Summit's website... '63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.

Re: Fuel Pump Rod [Re: hemicar1971] #2732933 01/14/20 12:47 PM 01/14/20 12:47 PM
Joined: Oct 2006 Posts: 427 Sweden Mopar Guy mopar
Mopar Guy mopar Joined: Oct 2006 Posts: 427 Sweden	Originally Posted by hemicar1971 https://www.summitracing.com/int/parts/cca-4626 It looks like there is a fuel push rod for a Steel Solid Roller Cam Shaft. Thanks That one is what i use in my RB stroker and a Carter fuel pump from mancini whit no ware on tip on a street car !

Re: Fuel Pump Rod [Re: GY3] #2733137 01/14/20 09:33 PM 01/14/20 09:33 PM
Joined: Jan 2003 Posts: 1,990 s. e. pa. C calrobb2000 top fuel
calrobb2000 top fuel C Joined: Jan 2003 Posts: 1,990 s. e. pa.	howards re doing a 383 with a howards pump rod ! motor has 14,000 miles from last rebuild by someone else ! rod has woren off app 1/16" and slightly mushromed already ? soooo ?

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1