So I want to run an 09 and up Hemi on an run in stand. I would like to use my HEMI 6 ignition along with a carb and my ritter intake. The purpose of this is to find leaks and make sure everything is good BEFORE I run it on the Dyno. My questions are.

1 Does the VVT move around without the ecm attached.? The shape of the wheel is identical to the pre 09 and down so I believe the HEMI 6 would work.
2. Would I need to lock the VVT in order to use the HEMI 6?
Matt

Unless you changed the crank tone ring to a 32 tooth it won't work. The timing pickup ring will work.

X2 on the tone wheel.
When the vvt is not plugged in it stays at rest, there is a lock pin in there that keeps will only let it advance 2* when the oil pressure comes up. right around 5:40 Ric talks about it,
https://www.youtube.com/watch?v=ug7MCLccUHk

I will be mounting a 32 tooth relutor wheel on the harmonic balance.
Thx for the VVT info
Matt