Correct fan clutch and fan for 71 340 non AC - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum Correct fan clutch and fan for 71 340 non AC

Print Thread

Correct fan clutch and fan for 71 340 non AC #2727629 12/28/19 11:10 AM 12/28/19 11:10 AM
Joined: Feb 2003 Posts: 495 W. Bloomfield, MI 7 71340vert OP mopar
71340vert OP mopar 7 Joined: Feb 2003 Posts: 495 W. Bloomfield, MI	What is the correct fan clutch for a 71 340 non AC car and correct fan? Pictures would be great. I assume the 7 blade fan the same as a 70 but not sure on the clutch.

Re: Correct fan clutch and fan for 71 340 non AC [Re: 71340vert] #2727654 12/28/19 12:37 PM 12/28/19 12:37 PM
Joined: Jan 2003 Posts: 4,114 MD floyd master
floyd master Joined: Jan 2003 Posts: 4,114 MD	That would be a 3462112 clutch unit. Checkout page four of this old post for pics of the 070 and 112 clutch comparison. https://board.moparts.org/ubbthreads/ubbthreads.php/topics/51309/4.html E-body 340 would get a 18.5” diameter fan (last three digits on part number 216)

Re: Correct fan clutch and fan for 71 340 non AC [Re: 71340vert] #2728030 12/29/19 03:50 PM 12/29/19 03:50 PM
Joined: Mar 2003 Posts: 673 Kennewick, Wa. 7 71vert340 mopar
71vert340 mopar 7 Joined: Mar 2003 Posts: 673 Kennewick, Wa.	Here's what is in my 71. Terry

Re: Correct fan clutch and fan for 71 340 non AC [Re: 71vert340] #2728470 12/31/19 08:16 AM 12/31/19 08:16 AM
Joined: Jun 2014 Posts: 1,321 VA D dragon slayer pro stock
dragon slayer pro stock D Joined: Jun 2014 Posts: 1,321 VA	It was not so much motor specific as body specific also. For the 71 340 if it was an A body it got the 215 fan. If it was E or B body it got the 216 fan. Standard was Torque drive. For AC it was Thermal drive. Except for B body 340. Both Standard and AC used thermal drive. All this from the 71 service manual chart in chapter 7 cooling.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1