Previous Thread
Next Thread
Print Thread
Page 4 of 9 1 2 3 4 5 6 7 8 9
Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2715531
11/13/19 09:08 PM
11/13/19 09:08 PM
Joined: Nov 2019
Posts: 8
Santa Clara, CA, USA
A
altair18 Offline
member
altair18  Offline
member
A

Joined: Nov 2019
Posts: 8
Santa Clara, CA, USA
Impressive car. Well done with the progress.


Trying out bilstein shock and I'm very pleased how easy and smooth it is to drive my pickup in rocky terrain.
Re: new project 1966 Hemi Coronet 500 [Re: altair18] #2724993
12/17/19 11:55 PM
12/17/19 11:55 PM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
Well cleaning some things up tonight as I’m finally able to put a few things back together. Also noticed while cleaning up the boot for one of the tie rod ends has a part number visible so I took a picture of that too.
Was able to loosely bolt the lower control arms and the strut rods into place.
Matt

287817E7-0142-450C-9DC8-180C362C1ACF.jpegA75A02B6-D2C5-40E1-91F7-CEE99736FEF0.jpegC9902814-036E-4623-8A6D-74C72D346F9C.jpeg
Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2725976
12/21/19 08:51 PM
12/21/19 08:51 PM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
A few parts added.

3F905327-268A-4225-9256-8C6ACE78F9E1.jpeg7ADBA416-6F89-4F57-87FC-AC6661B262BB.jpeg
Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2726996
12/26/19 09:50 AM
12/26/19 09:50 AM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
A few more of the suspension and brakes coming together. Going with some disc brakes, figure since we added so more go might want to add some more Whoa.
Matt

A8E6A263-A232-425C-B695-D450DD989371.jpeg4A41BFF1-29B9-4880-B474-5B6286D3DECD.jpeg
Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2735533
01/22/20 11:09 AM
01/22/20 11:09 AM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
Well some more progress, for the first time in probably over 40 years the K frame has a hemi setting back on top of it.
Matt

C05EF94F-7499-4BC9-8649-FB756B268FAE.jpeg9331F30A-954C-4D40-BC0A-A4D18A4DFABA.jpeg
Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2735546
01/22/20 11:35 AM
01/22/20 11:35 AM
Joined: Sep 2006
Posts: 1,126
Home of the Bluegrass
MoparJunkie Offline
super stock
MoparJunkie  Offline
super stock

Joined: Sep 2006
Posts: 1,126
Home of the Bluegrass
Nice, Matt! Them ole nasty Hemi's..... drive


"It takes a Mopar to catch a Mopar”
1971 Roadrunner FJ6 Sassy Grass 505"RB, 18 spline 4 speed, and Dana 60 with 3.54
2022 Hellcat Charger Widebody Redeye Jailbreak: Hellraisin with 8 speed auto



Re: new project 1966 Hemi Coronet 500 [Re: MoparJunkie] #2738131
01/30/20 03:54 PM
01/30/20 03:54 PM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
One TTI header polished and installed.
Matt

5DE80EDC-9D70-46C2-9534-C4E9078D375E.jpeg414FB306-0A7C-435A-80A6-80709ACBF349.jpeg
Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2738201
01/30/20 07:40 PM
01/30/20 07:40 PM
Joined: Jun 2003
Posts: 21,342
It's a dry heat
gtx6970 Offline
Too Many Posts
gtx6970  Offline
Too Many Posts

Joined: Jun 2003
Posts: 21,342
It's a dry heat
oh my

drooling.jpg
Re: new project 1966 Hemi Coronet 500 [Re: gtx6970] #2738294
01/31/20 12:01 AM
01/31/20 12:01 AM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
Cleaning up my leaf springs, have had them in evaporust for a day or so and pulled them out tonight.
Pretty easy to see the original black paint that was on the springs now.
Matt

716E77B1-253D-498E-B193-CD354D8604A6.jpeg9FEFF021-E7C0-450C-A1B3-49C800BC470C.jpeg
Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2739614
02/04/20 12:19 PM
02/04/20 12:19 PM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
Passenger side header polished and installed so little by little progress.
Matt

23BF09A3-2258-4A6E-801A-55A135392946.jpeg4DF2DD08-DFAD-4B60-B720-2F3B49B01A6D.jpeg
Last edited by mattsmopars; 02/04/20 12:20 PM.
Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2740771
02/07/20 08:11 PM
02/07/20 08:11 PM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
Working on my leaf springs now. Have most of them stripped off. Let each leaf soak a couple days in evaporust and then went over them with a paint stripping wheel. Also noticed that this spring pack has a R cast into a couple of the separate leafs.
Matt

DF12D6C8-E057-4121-8DC9-29F6C69F1EE1.jpegDCE2EA7F-6413-41B7-B157-7DD7342845AA.jpeg
Last edited by mattsmopars; 02/07/20 11:25 PM.
Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2740816
02/07/20 11:33 PM
02/07/20 11:33 PM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
Painting the springs before assembling them. As was mentioned earlier it does appear they were painted as an assembly so I will probably scuff and paint them again once the are all assembled.
Also posting a few other parts of the rear suspension that were powder coated a Casper clear after being cleaned up.
Matt

3D488420-26D9-477B-97C4-B032C7A16FAA.jpeg4998B541-56BA-4C34-B2CD-5EA1EF863B21.jpegFCDE7831-1181-4D92-8EE9-387ADCCC1D2A.jpeg61CDB5D2-DA49-4340-A5C4-D73924FA3528.jpeg
Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2740935
02/08/20 12:54 PM
02/08/20 12:54 PM
Joined: Jan 2003
Posts: 3,704
MICHIGAN
DynoDave Offline
master
DynoDave  Offline
master

Joined: Jan 2003
Posts: 3,704
MICHIGAN
Originally Posted by mattsmopars
Also posting a few other parts of the rear suspension that were powder coated a Casper clear after being cleaned up.


I have not heard of Casper clear, but it sure produces a natural, uncoated-looking finish.


DynoDave
Walter P. Chrysler Club - Great Lakes Region
Member # 12304
1970 Plymouth Duster
1972 Dodge Charger Rallye
https://wichargerguy.proboards.com/
1977 Chrysler Cordoba
Re: new project 1966 Hemi Coronet 500 [Re: DynoDave] #2741052
02/08/20 08:05 PM
02/08/20 08:05 PM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
Originally Posted by DynoDave
Originally Posted by mattsmopars
Also posting a few other parts of the rear suspension that were powder coated a Casper clear after being cleaned up.


I have not heard of Casper clear, but it sure produces a natural, uncoated-looking finish.

That’s what the guy at the powder coat place called it. So I assume that is the color. I could ask him and it and the manufacture when I go back.
Matt

Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2741855
02/11/20 09:46 AM
02/11/20 09:46 AM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
So while working on my leaf springs it’s interesting as the different things 66 springs have vs 67- up springs. I had already learned the clamps on a 66 were one year only, but the zinc liners are also one year only. The kits that are available for the most part are 67-71 style, I think that Frank B makes a 66 kit. So I’m going to share a few of those details in the thread.
Matt

BD4CF0F4-7AAF-4D92-9855-7DB896ABDBF1.jpeg5678CC17-D715-4A4B-AD5E-6196142F7B57.jpeg
the 66 springs have zinc liners that are 18” long vs the 11” liners in the 67-71 style kits

576C2212-D349-4AB3-928A-CE33D75A8B8B.jpeg57472765-C168-4322-B848-64928C27FC07.jpeg
the 66 specific clamps with a round hole.

Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2741857
02/11/20 09:49 AM
02/11/20 09:49 AM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
A comparison to some 67-69 hemi springs I also have out here in the shop. Notice the liners and the clamps.
Matt

391AFC40-E072-419E-8FF5-4F67F35B9EE8.jpeg68C12D6C-9310-4652-BE68-2E8683A37311.jpeg
Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2742599
02/13/20 03:13 PM
02/13/20 03:13 PM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
More leaf spring information. The factory paint marking on the ends, and more black paint on the sides of the zinc plates.
Matt

B2A611AF-3AB5-4C49-B211-27E9F0D884A2.jpegD69D54A8-4B5B-4A3A-A036-AC0EE53D2A4B.jpegFC927916-AF91-4FFB-AB89-C86689002B28.jpeg
Last edited by mattsmopars; 02/13/20 03:17 PM.
Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2742757
02/14/20 09:17 AM
02/14/20 09:17 AM
Joined: Mar 2015
Posts: 514
georgia
M
moparpro Offline
mopar
moparpro  Offline
mopar
M

Joined: Mar 2015
Posts: 514
georgia
great job you are doing on your coat i am to seeing completion of it, may i ask where did you buy that eng stand from i need one of those. thanks

Re: new project 1966 Hemi Coronet 500 [Re: moparpro] #2742804
02/14/20 11:18 AM
02/14/20 11:18 AM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
Originally Posted by moparpro
great job you are doing on your coat i am to seeing completion of it, may i ask where did you buy that eng stand from i need one of those. thanks


The engine stand is a US car tool stand. I'm looking forward to getting it at least to the driving point.
Matt

Re: new project 1966 Hemi Coronet 500 [Re: mattsmopars] #2746358
02/25/20 10:41 AM
02/25/20 10:41 AM
Joined: Mar 2007
Posts: 3,127
tennessee,usa
mattsmopars Offline OP
master
mattsmopars  Offline OP
master

Joined: Mar 2007
Posts: 3,127
tennessee,usa
So a few other pictures and ideas to maybe pass along. I had to remove the drivers side header again, do not listen to what TTI says on the website about using a milodon flexible dipstick. If you get it bent like it should be to come out the front, the dipstick will not push down inside the dipstick tube. The dipstick hits on the inside edge of the tube, I believe that might be able to be fixed if the dipstick has or had a ball on the end to keep it from hitting on the inner ledge of the tube. So I went with a reproduction hemi dipstick assembly sense I had to pull the header again. I was able to do some minor bending and it works great and looks a 1000 times better than the milodon.
Another note the 1966 zinc liners are available in the correct length from Frank Badelson so I got those and almost have one spring assembled. Once I get the front bushing installed I’m going to scuff it all back down and paint it as an assembly. A lot of time to paint each leaf separate before assembly, but I didn’t like the idea of raw metal between them. A few pictures of along the way.
Matt

459CAF54-68F6-4511-A300-46467D62E8C4.jpeg73AD040D-8CAA-4543-9780-72C2D33272C2.jpeg464BD1EF-3F32-4CD0-8274-7946CFB383EC.jpegA28E1534-DC74-4A46-A861-86F3C3C88B4C.jpeg
Last edited by mattsmopars; 02/25/20 03:56 PM.
Page 4 of 9 1 2 3 4 5 6 7 8 9






Powered by UBB.threads™ PHP Forum Software 7.7.1