Previous Thread
Next Thread
Print Thread
1971 Super Bee Emblems? #2715857
11/14/19 06:19 PM
11/14/19 06:19 PM
Joined: Jan 2003
Posts: 5,849
JERSEY
RJS Offline OP
master
RJS  Offline OP
master

Joined: Jan 2003
Posts: 5,849
JERSEY
I own a 71 Super Bee and my fender emblems are stick on like the decals. Is that correct??? I added a link to an e-bay ad that claims these with pins are for 70-71.
I also have a picture of a supposed original fender and can't really tell but think these may be pin on.

Which way is right or is both???

Thanks Ron

https://www.ebay.com/itm/1970-1971-...NOS-MoPar-Scat-Pack-Chryco/400976630245?

71beedamagefender.jpg
Last edited by RJS; 11/14/19 06:21 PM.
Re: 1971 Super Bee Emblems? [Re: RJS] #2715883
11/14/19 07:06 PM
11/14/19 07:06 PM
Joined: Jan 2003
Posts: 565
Pa.
3
340cpe Offline
mopar
340cpe  Offline
mopar
3

Joined: Jan 2003
Posts: 565
Pa.
Stick ons are definitely the proper ones. If you look in a parts manual 70 and 71 have different part numbers. Now the good and the bad, bad first good luck trying to find new/nos ones. There are nice used ones out there and although it is a bit tedious double sided tape can be applied and trimmed and they look great, have done it. The 70’s are the same size and profile, you would have to remove the pins and apply the tape. I do believe the location they belong on the fender is right over the fender reinforcement not allowing any pin fasteners therefore the tape/stick on. Hope this helps.

Re: 1971 Super Bee Emblems? [Re: 340cpe] #2715950
11/14/19 09:29 PM
11/14/19 09:29 PM
Joined: Jan 2003
Posts: 5,849
JERSEY
RJS Offline OP
master
RJS  Offline OP
master

Joined: Jan 2003
Posts: 5,849
JERSEY
Thanks for that information. I have very nice ones on the car that I assume are reproductions when PO did car in 2015 or so.
I'm going to be removing them soon to do a light sanding and rubbing to the paint.
It was always a question I had because of always seeing the pin on type on E-Bay.
Ron

IMG_2456 (Large).JPG
Re: 1971 Super Bee Emblems? [Re: RJS] #2716693
11/17/19 12:00 PM
11/17/19 12:00 PM
Joined: Jun 2012
Posts: 263
Valley of the sun, AZ
2
2JcodeChargers Offline
enthusiast
2JcodeChargers  Offline
enthusiast
2

Joined: Jun 2012
Posts: 263
Valley of the sun, AZ
Hi Ron,
Previous owner here. The pin type are for the 1970 hood. The hoods heat up for obvious reasons and the tape was not a good method of applying the name badges. For 1971, tape was used on the fender badges, although the font and style of the letter is the same (as least as much as I can tell). I used the factory application instructions for the location, so where those badges are should be pretty close to correct.
Hope you are enjoying the car.
Chris

Re: 1971 Super Bee Emblems? [Re: 2JcodeChargers] #2716794
11/17/19 03:58 PM
11/17/19 03:58 PM
Joined: Jan 2003
Posts: 5,849
JERSEY
RJS Offline OP
master
RJS  Offline OP
master

Joined: Jan 2003
Posts: 5,849
JERSEY
Originally Posted by 2JcodeChargers
Hi Ron,
Previous owner here. The pin type are for the 1970 hood. The hoods heat up for obvious reasons and the tape was not a good method of applying the name badges. For 1971, tape was used on the fender badges, although the font and style of the letter is the same (as least as much as I can tell). I used the factory application instructions for the location, so where those badges are should be pretty close to correct.
Hope you are enjoying the car.
Chris


Hi Steve,

The emblems are in the right places but the left side is on wrong per all the research I've done. On the driver's side it should be emblem then decal as you read it. No biggie, since I want to sand and rub the car I figured I'd ask about the pin emblems that all the seller's call 70-71.
I done many things to the car over the past couple of years to make it better and better.
Ron

IMG_2455 (Large).JPG
Re: 1971 Super Bee Emblems? [Re: RJS] #2716807
11/17/19 05:02 PM
11/17/19 05:02 PM
Joined: Aug 2007
Posts: 2,676
Conway, SC
T2R9 Online confused
master
T2R9  Online Confused
master

Joined: Aug 2007
Posts: 2,676
Conway, SC
Originally Posted by RJS
On the driver's side it should be emblem then decal as you read it.


This is correct as in the photo in the original post. The Bee always follows the emblem.

Re: 1971 Super Bee Emblems? [Re: T2R9] #2716866
11/17/19 07:14 PM
11/17/19 07:14 PM
Joined: Jan 2003
Posts: 5,849
JERSEY
RJS Offline OP
master
RJS  Offline OP
master

Joined: Jan 2003
Posts: 5,849
JERSEY
Originally Posted by T2R9
Originally Posted by RJS
On the driver's side it should be emblem then decal as you read it.


This is correct as in the photo in the original post. The Bee always follows the emblem.

Agreed


Advertisement
Sponsored Link
Moparts Newest Topics
mopar techs bulletin 338t
by rbkt65. 12/05/19 08:44 PM
Possible to convert 6 volt gen to 12 volt?
by Pacnorthcuda. 12/05/19 08:11 PM
12 Journey odd charge problem
by therocks. 12/05/19 07:38 PM
Moparts Recent Posts
Small block guys cooling. Question
by Bad340fish. 12/06/19 07:22 AM
What year for 15” rallyes?
by 6bblgt. 12/06/19 07:21 AM

Powered by UBB.threads™ PHP Forum Software 7.7.1