Previous Thread
Next Thread
Print Thread
Nitrous,,,any expets here? #2709352
10/22/19 09:55 PM
10/22/19 09:55 PM
Joined: Dec 2007
Posts: 12,066
Great Neck,LI,new york
hemi-itis Offline OP
I Live Here
hemi-itis  Offline OP
I Live Here

Joined: Dec 2007
Posts: 12,066
Great Neck,LI,new york
I want to cool my roots blower with a pair of N2o plates added to the exsisting 1 inch spacer,that did not work as the blade on the SV1 comes out a little more than 2 1/4 inches under thecarb base.I would need a 2 1/8 spacer that patrick says it too much and suggested the perimeter plates.They are well over $300 each! I m thinking a fogger nozzle in each spacer,just have to find out if one per carb is or do I need 2 per work

Last edited by hemi-itis; 10/26/19 05:50 PM.

HEMI-ITIS has no cure. My condition is fully BLOWN!!!

New best 60ft,, 1.42,1/8, 6.0 @117,, 9.38 @146.75 with 6 lbs boost @3700 lbs
Re: Nitrous,,,any expets here? [Re: hemi-itis] #2709392
10/23/19 06:42 AM
10/23/19 06:42 AM
Joined: Aug 2003
Posts: 3,541
On the bumper
N
n20mstr Offline
master
n20mstr  Offline
master
N

Joined: Aug 2003
Posts: 3,541
On the bumper
I responded on the facebook page.....

Call induction solutions, they were working on a plate for that carb a while ago.

If there is no perimeter plate available, then get someone (Induction solutions) to plumb you a few direct port nozzles in a spacer.

You might also get Nova Joe to plumb it for you


....BAD A$$ STREET CAR.....
Re: Nitrous,,,any expets here? [Re: n20mstr] #2709587
10/23/19 04:01 PM
10/23/19 04:01 PM
Joined: Jan 2003
Posts: 5,272
Hot Rod Ridge
FastmOp Offline
master
FastmOp  Offline
master

Joined: Jan 2003
Posts: 5,272
Hot Rod Ridge
Put it on alcy

Re: Nitrous,,,any expets here? [Re: hemi-itis] #2709628
10/23/19 06:30 PM
10/23/19 06:30 PM
Joined: Aug 2003
Posts: 33,583
Bend,OR USA
C
Cab_Burge Offline
I Win
Cab_Burge  Offline
I Win
C

Joined: Aug 2003
Posts: 33,583
Bend,OR USA
What about one of the Snow water methanol injection kit on straight methanol?


Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
Re: Nitrous,,,any expets here? [Re: Cab_Burge] #2709698
10/24/19 12:17 AM
10/24/19 12:17 AM
Joined: Dec 2007
Posts: 12,066
Great Neck,LI,new york
hemi-itis Offline OP
I Live Here
hemi-itis  Offline OP
I Live Here

Joined: Dec 2007
Posts: 12,066
Great Neck,LI,new york
Oh,they make preimeter plates for over $300 each.Just not in the budget..................I'm thinking a fogger nozzle into each carb spacer, just have to figure out the style nozzle and jetting.

Last edited by hemi-itis; 10/26/19 05:51 PM.

HEMI-ITIS has no cure. My condition is fully BLOWN!!!

New best 60ft,, 1.42,1/8, 6.0 @117,, 9.38 @146.75 with 6 lbs boost @3700 lbs
Re: Nitrous,,,any expets here? [Re: n20mstr] #2709699
10/24/19 12:19 AM
10/24/19 12:19 AM
Joined: Dec 2007
Posts: 12,066
Great Neck,LI,new york
hemi-itis Offline OP
I Live Here
hemi-itis  Offline OP
I Live Here

Joined: Dec 2007
Posts: 12,066
Great Neck,LI,new york
Originally Posted by n20mstr
I responded on the facebook page.....

Call induction solutions, they were working on a plate for that carb a while ago.

If there is no perimeter plate available, then get someone (Induction solutions) to plumb you a few direct port nozzles in a spacer.

You might also get Nova Joe to plumb it for you



I have everything except the nozzles.Plumbing is easy,just have to get 2 nozzles.

I had been looking at Snow & IAS for some time and decide gas it the coolest option,much lower IAT that W/m or straight meth.

10.19.19 010.jpg10.19.19 009.jpg
Last edited by hemi-itis; 10/24/19 12:23 AM.

HEMI-ITIS has no cure. My condition is fully BLOWN!!!

New best 60ft,, 1.42,1/8, 6.0 @117,, 9.38 @146.75 with 6 lbs boost @3700 lbs
Re: Nitrous,,,any expets here? [Re: hemi-itis] #2709718
10/24/19 06:57 AM
10/24/19 06:57 AM
Joined: Oct 2004
Posts: 2,944
back in Georgia
dthemi Offline
master
dthemi  Offline
master

Joined: Oct 2004
Posts: 2,944
back in Georgia
Spray whatever you like in there, but at the end of the day, nothing will be as good as methanol. Get a pair of rupert alky carbs if you're staying with carbs.Then you can spin it till you run over the crank if you like lol.

Re: Nitrous,,,any expets here? [Re: hemi-itis] #2709727
10/24/19 08:04 AM
10/24/19 08:04 AM
Joined: Feb 2005
Posts: 14,860
PA.
pittsburghracer Offline
"Little"John
pittsburghracer  Offline
"Little"John

Joined: Feb 2005
Posts: 14,860
PA.
Originally Posted by hemi-itis
I want to cool my roots blower with a pair of N2o plates added to the exsisting 1 inch spacer,that did dot work as the blade on the SZ1 comes out a little more tha 2 1/4 inches.I would need a 2 1/8 sapacer that patric says it too much and suggested the perimeter plates.They are well over $300 each! I m thinking a fogger nozzle in each spacer,just have to find out i per car is or do I need 2 per work





You are the only guy that I know that bought those carbs and still run them. Most guys gave up on them LONG ago.


1970 Duster
Edelbrock headed 408
6.143@110.85 mph
9.73@135.05 mph shifting at 6700 RPM
422 Indy headed small block
5.982@112.56 mph
9.42@138.27

Livin and lovin life one day at a time




Re: Nitrous,,,any expets here? [Re: hemi-itis] #2709773
10/24/19 11:58 AM
10/24/19 11:58 AM
Joined: Jan 2003
Posts: 11,487
Marion, South Carolina [><]
an8sec70cuda Offline
I Live Here
an8sec70cuda  Offline
I Live Here

Joined: Jan 2003
Posts: 11,487
Marion, South Carolina [><]
Did you put silicone on the nitrous plate?????

I haven't seen an SV1 on a car at the track in a while now that I think of it.


CHIP
'70 hemicuda street car...8.91 at 150.5 mph w/ 4.10s, 8.97 at 152.5 mph w/ 3.54s so far
'69 road runner 440 w/ Indy SRs
'69 road runner 440-6, 4 speed...Dad's ride
'71 Demon 340 resto project
'06 GMC 2500HD LBZ Duramax...toy hauler
'16 Grand Caravan SXT...baby hauler
Re: Nitrous,,,any expets here? [Re: an8sec70cuda] #2709972
10/25/19 10:19 AM
10/25/19 10:19 AM
Joined: Dec 2007
Posts: 12,066
Great Neck,LI,new york
hemi-itis Offline OP
I Live Here
hemi-itis  Offline OP
I Live Here

Joined: Dec 2007
Posts: 12,066
Great Neck,LI,new york
[quote=an8sec70cuda]Did you put silicone on the nitrous plate?????

/quote]
Yes,that is silicone and not by me laugh2 Helpers try to help but left UNattended things like this happen. I had a police tow and left to come back and find that eek
I cleaned it up and put it back together with the SUPERPERMFORMANCE gaskets only to find the blade hit the crossbars..............
I do have a pair of Dominators lined up to borrow and try.That are off a 600ci raceboat with 2 engines. I'm a low budget mostly NO budget exhibitionist just trying to go fast so I just kept working on these carbs.
They seem to be good,,,,,just not GREAT!
I mostly street drive and try to get to the track 3 or 4 times a year.This has been a lean year getting out to Atco only one time and don't think I can make it out before seasons end. The auto biz sure has changed the last few years!

6.8.19 007.jpg

HEMI-ITIS has no cure. My condition is fully BLOWN!!!

New best 60ft,, 1.42,1/8, 6.0 @117,, 9.38 @146.75 with 6 lbs boost @3700 lbs
Re: Nitrous,,,any expets here? [Re: dthemi] #2709974
10/25/19 10:24 AM
10/25/19 10:24 AM
Joined: Dec 2007
Posts: 12,066
Great Neck,LI,new york
hemi-itis Offline OP
I Live Here
hemi-itis  Offline OP
I Live Here

Joined: Dec 2007
Posts: 12,066
Great Neck,LI,new york
Originally Posted by dthemi
Spray whatever you like in there, but at the end of the day, nothing will be as good as methanol. Get a pair of rupert alky carbs if you're staying with carbs.Then you can spin it till you run over the crank if you like lol.

I don't know how well that would work out for street driving.I can drive on pump premium and still go high 9's. Meth or "E" burns at a much faster rate requiring more fuel stops,so I stay with gas and step up to 112 for the race daze.

IMG_9960.JPG

HEMI-ITIS has no cure. My condition is fully BLOWN!!!

New best 60ft,, 1.42,1/8, 6.0 @117,, 9.38 @146.75 with 6 lbs boost @3700 lbs

Advertisement
Sponsored Link
Moparts Newest Topics
lower dash pads
by copchaser. 11/13/19 02:59 PM
2014 Saleen Challenger
by Neil. 11/13/19 11:01 AM
1971 Cuda Option Costs?
by lrtexpress. 11/13/19 10:42 AM
Ever seen eBarf ads "disappear" w/o a trace?
by BradH. 11/13/19 10:38 AM
Moparts Recent Posts
Recall: 2014-2019 Ram 1500 diesel EGR coolant leaks
by kenworth_goose. 11/13/19 03:12 PM
1971 Cuda Option Costs?
by crackedback. 11/13/19 03:07 PM
Original Scat Pack Bee Sign
by rickseeman. 11/13/19 03:06 PM
lower dash pads
by copchaser. 11/13/19 02:59 PM

Powered by UBB.threads™ PHP Forum Software 7.7.1