70 Challenger fenders - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum 70 Challenger fenders

Print Thread

70 Challenger fenders #2685225 08/07/19 08:10 AM 08/07/19 08:10 AM
Joined: May 2014 Posts: 128 pa M mikeporp OP member
mikeporp OP member M Joined: May 2014 Posts: 128 pa	Does anyone have any experience with AMD fenders that I'm seeing advertised as improved tooling? I've pretty much given up on trying to find any OEM or NOS fenders in usable condition for my 70 vert that I won't have to mortgage the house for. Any feedback would be appreciated, thanks. Mike 1970 challenger convertible

Re: 70 Challenger fenders [Re: mikeporp] #2686439 08/11/19 10:36 AM 08/11/19 10:36 AM
Joined: Aug 2005 Posts: 759 Southington Ct. T turbobitt super stock
turbobitt super stock T Joined: Aug 2005 Posts: 759 Southington Ct.	Based on my recent experience I would use Dynacorn. The sheet metal were straight out of the box and didn't take much to get the fit were I wanted it. Still takes a little work. The trunk, door and quarter I bought are far better than the Goodmark pieces I used in the past. If you are looking for a dealer I may be able to help. My buddy was so impressed with there stuff he inquired on becoming a dealer. AG. 1970 Challenger w/572 Hemi street car and my pride and joy. 1986 T-Type with 272 Stage 2 Buick V6 engine - True 8 second street car. Just updated the engine and put down 928 HP @ 35# boost to the ground on chasis dyno. 1976 Cee Bee Avenger Jet Boat - 460 Ford powered.

Re: 70 Challenger fenders [Re: turbobitt] #2686545 08/11/19 04:13 PM 08/11/19 04:13 PM
Joined: Jan 2003 Posts: 27,451 So Cal autoxcuda Too Many Posts
autoxcuda Too Many Posts Joined: Jan 2003 Posts: 27,451 So Cal	Originally Posted by turbobitt Based on my recent experience I would use Dynacorn. The sheet metal were straight out of the box and didn't take much to get the fit were I wanted it. Still takes a little work. The trunk, door and quarter I bought are far better than the Goodmark pieces I used in the past. If you are looking for a dealer I may be able to help. My buddy was so impressed with there stuff he inquired on becoming a dealer. AG. Did you install Dynacorn Challenger fenders? A close friend did at his shop and the hood gaps were totally screwed up. Go AMD. Last edited by autoxcuda; 08/11/19 04:15 PM.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1