Re: Mopar distributor nylon shaft collar
[Re: Lee446]
#2678822
07/18/19 07:15 PM
07/18/19 07:15 PM
|
Joined: Nov 2003
Posts: 36,040 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,040
Lincoln Nebraska
|
Yes get a generic collar which will be tighter radially than the OE collar (unless you want it 100% OE). While you are at it reduce the axial clearance to .005" & speedway mtrs has a kit of flat washers for dirt cheap ($4.99 iirc + the ride).
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: Mopar distributor nylon shaft collar
[Re: gzig5]
#2679198
07/19/19 07:37 PM
07/19/19 07:37 PM
|
Joined: Dec 2013
Posts: 4,663 Wichita
GY3
master
|
master
Joined: Dec 2013
Posts: 4,663
Wichita
|
Hillman makes nylon collars that are available at Lowes. I've rebuilt quite a few distributors with them and they work perfect. .99 for two last I checked..
'63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.
|
|
|
Re: Mopar distributor nylon shaft collar
[Re: GY3]
#2679477
07/20/19 03:53 PM
07/20/19 03:53 PM
|
Joined: Dec 2004
Posts: 1,674 California
biggE
top fuel
|
top fuel
Joined: Dec 2004
Posts: 1,674
California
|
Hillman makes nylon collars that are available at Lowes. I've rebuilt quite a few distributors with them and they work perfect. .99 for two last I checked.. Great tip! I just went and bought a few of the two packs at Lowes. The only difference was in CA they are $1.54 per pack plus tax. Typical extra charge for just breathing the air here.
Last edited by biggE; 07/20/19 03:54 PM.
|
|
|
Re: Mopar distributor nylon shaft collar
[Re: biggE]
#2679480
07/20/19 04:21 PM
07/20/19 04:21 PM
|
Joined: Dec 2013
Posts: 4,663 Wichita
GY3
master
|
master
Joined: Dec 2013
Posts: 4,663
Wichita
|
Hillman makes nylon collars that are available at Lowes. I've rebuilt quite a few distributors with them and they work perfect. .99 for two last I checked.. Great tip! I just went and bought a few of the two packs at Lowes. The only difference was in CA they are $1.54 per pack plus tax. Typical extra charge for just breathing the air here. They have the roll pins too in a Hillman pack. Can you post up the part number for the collars? I went looking last night and couldn't find my stash..
'63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.
|
|
|
Re: Mopar distributor nylon shaft collar
[Re: mopars4ever]
#2679720
07/21/19 12:04 PM
07/21/19 12:04 PM
|
Joined: Dec 2013
Posts: 4,663 Wichita
GY3
master
|
master
Joined: Dec 2013
Posts: 4,663
Wichita
|
I wonder how well they do with the engine temps? I assume the quality is there? The last one I used has been in the engine for 5700 hard miles and hundreds of dragstrip passes. It has been over 210 a couple of times but never "overheated".
'63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.
|
|
|
|
|