Previous Thread
Next Thread
Print Thread
ATI damper for RB with Indy timing cover #2668836
06/22/19 09:24 PM
06/22/19 09:24 PM
Joined: Oct 2006
Posts: 818
New York, USA
Chargerfan68 Offline OP
super stock
Chargerfan68  Offline OP
super stock

Joined: Oct 2006
Posts: 818
New York, USA
Anybody positive which ATI super damper i would need with the Indy cast timing cover with crank hub spacer? I thought it was the same one as for the jesel belt drive setup, but i want to make sure before i pull the trigger. Figured i’d check here with the experts first instead of calling and possibly waiting on hold.


1.50 60Ft. , 10.75@ 127MPH Hauling 3900 LBS.
Re: ATI damper for RB with Indy timing cover [Re: Chargerfan68] #2668838
06/22/19 09:45 PM
06/22/19 09:45 PM
Joined: Feb 2003
Posts: 859
Massillon, Ohio
C
cudatom Offline
super stock
cudatom  Offline
super stock
C

Joined: Feb 2003
Posts: 859
Massillon, Ohio
ATI #917127E damper is the one I have.

Re: ATI damper for RB with Indy timing cover [Re: cudatom] #2668879
06/22/19 11:28 PM
06/22/19 11:28 PM
Joined: Oct 2006
Posts: 818
New York, USA
Chargerfan68 Offline OP
super stock
Chargerfan68  Offline OP
super stock

Joined: Oct 2006
Posts: 818
New York, USA
Originally Posted by cudatom
ATI #917127E damper is the one I have.


Thanks for the info up


1.50 60Ft. , 10.75@ 127MPH Hauling 3900 LBS.
Re: ATI damper for RB with Indy timing cover [Re: Chargerfan68] #2669161
06/23/19 09:58 PM
06/23/19 09:58 PM
Joined: Mar 2008
Posts: 78
Cedar Rapids, IA
6
69Mcode440 Offline
member
69Mcode440  Offline
member
6

Joined: Mar 2008
Posts: 78
Cedar Rapids, IA
They have a chart on their website with the info you need.

Mike


Mike
69 440 Cuda
71 Dart drag car
70 Duster drag car (project)
2006 Ram 1500 SLT 4x4
Re: ATI damper for RB with Indy timing cover [Re: 69Mcode440] #2669181
06/23/19 10:35 PM
06/23/19 10:35 PM
Joined: Oct 2006
Posts: 818
New York, USA
Chargerfan68 Offline OP
super stock
Chargerfan68  Offline OP
super stock

Joined: Oct 2006
Posts: 818
New York, USA
Originally Posted by 69Mcode440
They have a chart on their website with the info you need.

Mike


Yes, thanks. I did find that chart, but like in the past, i have purchased parts from company websites, and they did not fit right, or were incorrectly listed. I figured its best to ask the real deal racers here that built this combo. Thanks for pointing that out though. up


1.50 60Ft. , 10.75@ 127MPH Hauling 3900 LBS.
Re: ATI damper for RB with Indy timing cover [Re: Chargerfan68] #2669183
06/23/19 10:43 PM
06/23/19 10:43 PM
Joined: Feb 2005
Posts: 14,783
PA.
pittsburghracer Online work
"Little"John
pittsburghracer  Online Work
"Little"John

Joined: Feb 2005
Posts: 14,783
PA.
I had to put a small shim that ATI offers behind my ATI damper with my Indy cover.


1970 Duster
Edelbrock headed 408
6.143@110.85 mph
9.73@135.05 mph shifting at 6700 RPM
422 Indy headed small block
5.982@112.56 mph
9.42@138.27

Livin and lovin life one day at a time




Re: ATI damper for RB with Indy timing cover [Re: pittsburghracer] #2669484
06/24/19 06:29 PM
06/24/19 06:29 PM
Joined: Jan 2003
Posts: 556
Livermore, CA
D
Dduster Offline
mopar
Dduster  Offline
mopar
D

Joined: Jan 2003
Posts: 556
Livermore, CA
This ^^^^. Without the extra shim the damper will 'bottom'out' on the timing cover.

Re: ATI damper for RB with Indy timing cover [Re: Dduster] #2669578
06/24/19 10:16 PM
06/24/19 10:16 PM
Joined: Oct 2006
Posts: 818
New York, USA
Chargerfan68 Offline OP
super stock
Chargerfan68  Offline OP
super stock

Joined: Oct 2006
Posts: 818
New York, USA
Thanks so much guys. I will make sure i check clearance and use one. Great information that helps in case i missed that. up


1.50 60Ft. , 10.75@ 127MPH Hauling 3900 LBS.
Re: ATI damper for RB with Indy timing cover [Re: Chargerfan68] #2669615
06/24/19 11:31 PM
06/24/19 11:31 PM
Joined: Mar 2008
Posts: 78
Cedar Rapids, IA
6
69Mcode440 Offline
member
69Mcode440  Offline
member
6

Joined: Mar 2008
Posts: 78
Cedar Rapids, IA
I bought the hub listed for use with the indy cover and just swapped it with the original hub on my ATI damper. Summit has them in stock.

Mike


Mike
69 440 Cuda
71 Dart drag car
70 Duster drag car (project)
2006 Ram 1500 SLT 4x4

Advertisement
Sponsored Link
Moparts Newest Topics
converting 65 plymouth steering column to 66 up
by MrBelvedere2. 10/23/19 04:15 PM
Best Vinyl Top manufacturer (Superbird)?
by calmopar. 10/23/19 03:05 PM
Carb Jet Question ??
by n20mstr. 10/23/19 02:45 PM
Moparts Recent Posts
Help, trying to buy a car from out of state Im in PA
by W.I.N. racing. 10/23/19 04:47 PM
duster strip
by FJR doc. 10/23/19 04:45 PM
70 RR V Code
by mopar346. 10/23/19 04:45 PM
Like / dislike
by Soopernaut. 10/23/19 04:38 PM

Powered by UBB.threads™ PHP Forum Software 7.7.1