Previous Thread
Next Thread
Print Thread
Page 2 of 2 1 2
Re: Looking for GOOD head porter [Re: Chief] #2667531
06/19/19 10:53 AM
06/19/19 10:53 AM
Joined: Dec 2011
Posts: 40
Texas
C
Chief Offline OP
member
Chief  Offline OP
member
C

Joined: Dec 2011
Posts: 40
Texas
Thanks for the recommendations guy's.

I spoke with Dwayne and had a good talk about my issues. It seems it would be a waste to mess with these heads so he saved me some money on these..lol

Good guy to talk to. I'll send out my next set of heads to him.

Dave


Dave Covey
Re: Looking for GOOD head porter [Re: Chief] #2667551
06/19/19 11:28 AM
06/19/19 11:28 AM
Joined: Jan 2003
Posts: 17,324
Las Vegas
Al_Alguire Offline
I Live Here
Al_Alguire  Offline
I Live Here

Joined: Jan 2003
Posts: 17,324
Las Vegas
Lots of cylinder head guys out there. If you want hands down the BEST then I would talk to Tom Slawko at Slawko racing heads. Self Racing Heads is another very good shop. The aforementioned shops I am sure also do very good work. Dwayne is always highly spoken of, and I have had some stuff done by CompuFlo and it was nice.

Re: Looking for GOOD head porter [Re: BANDIT] #2667596
06/19/19 12:48 PM
06/19/19 12:48 PM
Joined: Jan 2003
Posts: 11,658
Marion, South Carolina [><]
an8sec70cuda Offline
I Live Here
an8sec70cuda  Offline
I Live Here

Joined: Jan 2003
Posts: 11,658
Marion, South Carolina [><]
Originally Posted by BANDIT
Dwayne is the man, very knowledgeable and easy to deal with. Won’t blow smoke up your dress either. Jim.

iagree Dwayne Porter FTW


CHIP
'70 hemicuda street car...8.91 at 150.5 mph w/ 4.10s, 8.97 at 152.5 mph w/ 3.54s so far
'69 road runner 440 w/ Indy SRs
'69 road runner 440-6, 4 speed...Dad's ride
'71 Demon 340 resto project
'06 GMC 2500HD LBZ Duramax...toy hauler
'16 Grand Caravan SXT...baby hauler
Re: Looking for GOOD head porter [Re: an8sec70cuda] #2667627
06/19/19 02:19 PM
06/19/19 02:19 PM
Joined: Oct 2006
Posts: 829
New York, USA
Chargerfan68 Offline
super stock
Chargerfan68  Offline
super stock

Joined: Oct 2006
Posts: 829
New York, USA
Dwayne Porter! Superb porting, always willing to discuss engine builds and devotes his time, and his word is GOLDEN , in my experiences. Mine would be off to him


1.50 60Ft. , 10.75@ 127MPH Hauling 3900 LBS.
Re: Looking for GOOD head porter [Re: Chargerfan68] #2667815
06/20/19 12:22 AM
06/20/19 12:22 AM
Joined: Jan 2003
Posts: 985
Cumberland, MD
Moparguy383 Offline
super stock
Moparguy383  Offline
super stock

Joined: Jan 2003
Posts: 985
Cumberland, MD
Dwayne Porter. Did my Indy's and my brothers Edelbrocks. Answers the phone, willing to talk to you about your concerns. Gets stuff done when he says it will be done! twocents

Re: Looking for GOOD head porter [Re: Chief] #2667856
06/20/19 07:22 AM
06/20/19 07:22 AM
Joined: Jan 2007
Posts: 6,570
flint michigan
mopar dave Offline
master
mopar dave  Offline
master

Joined: Jan 2007
Posts: 6,570
flint michigan
Those flow numbers are very similar to my Edelbrock Max Wedge heads cnc'd by Hughes Engines.

Re: Looking for GOOD head porter [Re: Chief] #2667863
06/20/19 07:53 AM
06/20/19 07:53 AM
Joined: Jan 2003
Posts: 15,429
Val-haul-ass... eventually
B
BradH Offline
I almost got away with it!
BradH  Offline
I almost got away with it!
B

Joined: Jan 2003
Posts: 15,429
Val-haul-ass... eventually
Originally Posted by Chief

I spoke with Dwayne and had a good talk about my issues. It seems it would be a waste to mess with these heads so he saved me some money on these..lol

We're you looking for improvements beyond what he considers cost effective for those heads?

Re: Looking for GOOD head porter [Re: Tech Instructor] #2667866
06/20/19 08:10 AM
06/20/19 08:10 AM
Joined: Jan 2004
Posts: 591
IL
D
Dart451 Offline
mopar
Dart451  Offline
mopar
D

Joined: Jan 2004
Posts: 591
IL
Originally Posted by Tech Instructor
Dwayne Porter all the way excellent customer service.
up

Re: Looking for GOOD head porter [Re: Dart451] #2667884
06/20/19 08:54 AM
06/20/19 08:54 AM
Joined: Oct 2004
Posts: 2,650
Connecticut
FurryStump Offline
master
FurryStump  Offline
master

Joined: Oct 2004
Posts: 2,650
Connecticut
Dwayne did my X heads, very happy with the work and his patience answering all my questions. He consistently offers well thought out advice on this and other boards I have been on. I wouldn’t hesitate to go back to him.

Re: Looking for GOOD head porter [Re: FurryStump] #2667896
06/20/19 09:17 AM
06/20/19 09:17 AM
Joined: Dec 2007
Posts: 12,143
Great Neck,LI,new york
hemi-itis Offline
I Live Here
hemi-itis  Offline
I Live Here

Joined: Dec 2007
Posts: 12,143
Great Neck,LI,new york
How many vendors still come om here and POST. Jump in on conversation and give UNsolicited advise. Not too many left!!


HEMI-ITIS has no cure. My condition is fully BLOWN!!!

New best 60ft,, 1.42,1/8, 6.0 @117,, 9.38 @146.75 with 6 lbs boost @3700 lbs
Re: Looking for GOOD head porter [Re: Al_Alguire] #2668012
06/20/19 01:09 PM
06/20/19 01:09 PM
Joined: Feb 2008
Posts: 408
Monrovia, So-Cal, USA
racerhog Offline
mopar
racerhog  Offline
mopar

Joined: Feb 2008
Posts: 408
Monrovia, So-Cal, USA
Shane Studley (Percision Cylinder Heads) Is in Cedar City Utah....

https://www.facebook.com/PrecisionCylinderHeads/

Last edited by racerhog; 06/20/19 01:11 PM.

Bob(Cowboy)Hogan
Monrovia So-Cal
Re: Looking for GOOD head porter [Re: racerhog] #2668211
06/21/19 12:55 AM
06/21/19 12:55 AM
Joined: Aug 2003
Posts: 34,190
Bend,OR USA
C
Cab_Burge Online content
I Win
Cab_Burge  Online Content
I Win
C

Joined: Aug 2003
Posts: 34,190
Bend,OR USA
Originally Posted by racerhog
Shane Studley (Percision Cylinder Heads) Is in Cedar City Utah....

https://www.facebook.com/PrecisionCylinderHeads/

Shane and his Dad specialized in NHRA stokers and SS, not all out street motors usually work
I used Don on some of my iron heads for street and strip a long time ago, several years before he moved to Utah and passed away whiney
Al Etter moved 1/2 a block down the street from me in Hesperia before we moved up here to Oregon shruggy
My how time has flown whistling


Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
Re: Looking for GOOD head porter [Re: Cab_Burge] #2668283
06/21/19 09:27 AM
06/21/19 09:27 AM
Joined: Jan 2003
Posts: 4,197
Chicago, IL
TonyS451 Offline
master
TonyS451  Offline
master

Joined: Jan 2003
Posts: 4,197
Chicago, IL
Dwayne Porter for sure. I’ve been using him for over 15 years and very happy with everything he’s done for me. He does fantastic port work, but also extremely informative, honest, quick and fair.


2 kids and a dog
Page 2 of 2 1 2

Advertisement
Sponsored Link
Moparts Newest Topics
Six pack idle solenoid
by Kidsixpack. 02/16/20 06:45 PM
Really weird electrical problem 98 Caravan
by MadMatt. 02/16/20 06:30 PM
69 Charger Radio Suppresor
by Sixt8Chrgr. 02/16/20 06:17 PM
NOS truck tie rod ends on ebay $40 incl. shp
by larrymopar360. 02/16/20 06:10 PM
Moparts Recent Posts
AMC 360
by Mattax. 02/16/20 07:09 PM
A/C swap 318 to 451
by Jerry. 02/16/20 07:09 PM
511 winter updates
by B3422W5. 02/16/20 07:09 PM
Really weird electrical problem 98 Caravan
by stumpy. 02/16/20 07:08 PM




Powered by UBB.threads™ PHP Forum Software 7.7.1