Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
Remote oil filter adapter for BB pump-solved! #2656133
05/16/19 09:52 PM
05/16/19 09:52 PM
Joined: Jan 2003
Posts: 16,917
NC
440Jim Offline OP
I Live Here
440Jim  Offline OP
I Live Here

Joined: Jan 2003
Posts: 16,917
NC
I found a surprise on the Daytona I bought.
The stock oil pump hits the steering linkage, where the filter mounts to the pump.
The stock unit is too wide at the filter boss. The pump itself clears fine, past the universal joint.

Does anyone make an oil pump cover to use a remote filter mount, but doesn't use the circle of the stock filter/mount?
I would prefer to not change the entire engine over to an external pickup system and pan.
The engine is built, dyno tested, and ready to race. And it doesn't turn over 6000ish RPM.

Steering-filter2_label.jpg
Last edited by 440Jim; 05/24/19 12:10 PM. Reason: Title -solved!-

1993 Daytona, 5.50 at 130mph (1/8) 1.19 sixty ft (PG). Link to 572 B1 - Part 1
Re: Remote oil filter adapter for BB pump [Re: 440Jim] #2656135
05/16/19 09:55 PM
05/16/19 09:55 PM
Joined: Jan 2003
Posts: 16,917
NC
440Jim Offline OP
I Live Here
440Jim  Offline OP
I Live Here

Joined: Jan 2003
Posts: 16,917
NC
Here is the view from the side. The engine needs to go back about 1" and down about 3/4", but it hits the steering linkage.

Steering-filter1_small.jpg
Last edited by 440Jim; 05/16/19 09:56 PM.

1993 Daytona, 5.50 at 130mph (1/8) 1.19 sixty ft (PG). Link to 572 B1 - Part 1
Re: Remote oil filter adapter for BB pump [Re: 440Jim] #2656141
05/16/19 10:25 PM
05/16/19 10:25 PM
Joined: Oct 2005
Posts: 8,828
Ontario, Canada
S
Stanton Online content
Don't question me!
Stanton  Online Content
Don't question me!
S

Joined: Oct 2005
Posts: 8,828
Ontario, Canada
440Source makes an awesome unit AND the price is right !!

Well I just checked their website and it looks like they no longer have them BUT if it were me, I'd give them a call - you never know, they may have a couple left.

Re: Remote oil filter adapter for BB pump [Re: Stanton] #2656144
05/16/19 10:41 PM
05/16/19 10:41 PM
Joined: Jan 2003
Posts: 6,130
Melbourne , Australia
LA360 Offline
master
LA360  Offline
master

Joined: Jan 2003
Posts: 6,130
Melbourne , Australia
Milodon make one from memory


Alan Jones
Re: Remote oil filter adapter for BB pump [Re: 440Jim] #2656146
05/16/19 10:42 PM
05/16/19 10:42 PM
Joined: Jan 2003
Posts: 30,947
Oregon
A
AndyF Offline
I Win
AndyF  Offline
I Win
A

Joined: Jan 2003
Posts: 30,947
Oregon
I made this cover a few years back. It might work for you. The lines point straight down out of the cover so you'll have to look to see if the fittings would clear your steering. The other option is to use the Milodon 21225 which routes the oil lines out the front of the block. That cover would clear your system but you'll need to invest in a remote filter. I have a CV housing sitting on the shelf if you're interested. I sold off the last of my Milodon stash last year otherwise I would've had everything you needed.

3h (Large).jpg
Last edited by AndyF; 05/16/19 10:47 PM.
Re: Remote oil filter adapter for BB pump [Re: 440Jim] #2656151
05/16/19 11:09 PM
05/16/19 11:09 PM
Joined: Aug 2003
Posts: 43,007
Bend,OR USA
C
Cab_Burge Offline
I Win
Cab_Burge  Offline
I Win
C

Joined: Aug 2003
Posts: 43,007
Bend,OR USA
I use the Milidon pump cover that is set up for using fittings and hoses to the remote HP6 type oil filter up scope
I wish I knew how to post pictures on here so I could show you mine in my tube chassis car with steering like yours whiney
Let us know what you do thumbs


Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
Re: Remote oil filter adapter for BB pump [Re: Cab_Burge] #2656154
05/16/19 11:27 PM
05/16/19 11:27 PM
Joined: Dec 2007
Posts: 12,587
Great Neck,LI,new york
hemi-itis Offline
I Live Here
hemi-itis  Offline
I Live Here

Joined: Dec 2007
Posts: 12,587
Great Neck,LI,new york
I removed an accusump and a dual remote oil filter set and replaced it with a system one oil filter.Wish I did it years sooner but we all know how that goes.Andy has a cover so it would be a snap.

Last edited by hemi-itis; 05/17/19 08:07 PM.

HEMI-ITIS has no cure.
My condition is fully BLOWN!!
Re: Remote oil filter adapter for BB pump [Re: hemi-itis] #2656174
05/17/19 03:52 AM
05/17/19 03:52 AM
Joined: Oct 2003
Posts: 209
Finland
H
Hessu Offline
enthusiast
Hessu  Offline
enthusiast
H

Joined: Oct 2003
Posts: 209
Finland

Re: Remote oil filter adapter for BB pump [Re: Hessu] #2656179
05/17/19 06:48 AM
05/17/19 06:48 AM
Joined: Jan 2003
Posts: 16,917
NC
440Jim Offline OP
I Live Here
440Jim  Offline OP
I Live Here

Joined: Jan 2003
Posts: 16,917
NC
I am using the internal oil pickup.
I only need to have the fittings on the pump for the remote filter.
These pump covers that include both the remote filter fittings, and the external oil pickup lines, can I just plug the pickup line holes?
Will they then work with the internal oil pickup passages (stock/hemi)?
For example, the Milidon-21225
[img]https://static.summitracing.com/global/images/prod/mediumlarge/mil-21225_ml.jpg?rep=False[/img]

Last edited by 440Jim; 05/17/19 07:17 AM. Reason: pic

1993 Daytona, 5.50 at 130mph (1/8) 1.19 sixty ft (PG). Link to 572 B1 - Part 1
Re: Remote oil filter adapter for BB pump [Re: 440Jim] #2656180
05/17/19 06:55 AM
05/17/19 06:55 AM
Joined: Jan 2005
Posts: 4,243
Charlotte, North Carolina
sgcuda Offline
master
sgcuda  Offline
master

Joined: Jan 2005
Posts: 4,243
Charlotte, North Carolina
There shouldn't be any issues if you wanted to plug off the external pickup line and just use your existing internal setup, as long as you use the same pump. Some of the race pumps don't have holes drilled for internal pickup.

Re: Remote oil filter adapter for BB pump [Re: sgcuda] #2656226
05/17/19 10:41 AM
05/17/19 10:41 AM
Joined: Jan 2012
Posts: 2,603
Stuttgart, Arkansas
rickseeman Online content
master
rickseeman  Online Content
master

Joined: Jan 2012
Posts: 2,603
Stuttgart, Arkansas
I've never had a chassis car that didn't have the same interference. All you are going to change is the top cover. There are several on the market. The billet aluminum Milodon as already shown is a nice one.


2011 Drag Pak Challenger
Re: Remote oil filter adapter for BB pump [Re: rickseeman] #2656233
05/17/19 11:27 AM
05/17/19 11:27 AM
Joined: Jan 2008
Posts: 755
Rochester, PA (near Pittsburgh...
1
1974 474 Duster Offline
super stock
1974 474 Duster  Offline
super stock
1

Joined: Jan 2008
Posts: 755
Rochester, PA (near Pittsburgh...
I have the same issue on my Daytona. I use a NAPA Gold 1311 short filter on it. Shouldn't see much debris & let's face it. You can always change the filter & add 1/2qt of oil
See ya, Ken

Re: Remote oil filter adapter for BB pump [Re: 440Jim] #2656235
05/17/19 11:29 AM
05/17/19 11:29 AM
Joined: Jan 2003
Posts: 17,801
S.E. Michigan
ZIPPY Offline
I Live Here
ZIPPY  Offline
I Live Here

Joined: Jan 2003
Posts: 17,801
S.E. Michigan
Originally Posted by 440Jim
I am using the internal oil pickup.
I only need to have the fittings on the pump for the remote filter.
These pump covers that include both the remote filter fittings, and the external oil pickup lines, can I just plug the pickup line holes?
Will they then work with the internal oil pickup passages (stock/hemi)?
For example, the Milidon-21225
[img]https://static.summitracing.com/global/images/prod/mediumlarge/mil-21225_ml.jpg?rep=False[/img]


I have never owned a 21225, but I bought the 21215 and remember it had provisions for both internal and external pickup,
and either port could have been blocked off to run the other.

Since it's kind of the same family of parts, I would be surprised if the 21225 was not the same.


Rich H.

Esse Quam Videri




Re: Remote oil filter adapter for BB pump [Re: 440Jim] #2656247
05/17/19 12:06 PM
05/17/19 12:06 PM
Joined: Jan 2003
Posts: 25,618
Rio Linda, CA
John_Kunkel Offline
Too Many Posts
John_Kunkel  Offline
Too Many Posts

Joined: Jan 2003
Posts: 25,618
Rio Linda, CA
This would probably work but I can't remember who made it.

098.jpg

The INTERNET, the MISinformation superhighway
Re: Remote oil filter adapter for BB pump [Re: John_Kunkel] #2656251
05/17/19 12:40 PM
05/17/19 12:40 PM
Joined: Feb 2005
Posts: 20,116
PA.
pittsburghracer Offline
"Little"John
pittsburghracer  Offline
"Little"John

Joined: Feb 2005
Posts: 20,116
PA.
Originally Posted by John_Kunkel
This would probably work but I can't remember who made it.




Don’t hold me to it but I think Canton offers some nice stuff.


1970 Duster
Edelbrock headed 408
5.984@112.52
422 Indy headed small block
5.982@112.56 mph
9.42@138.27

Livin and lovin life one day at a time




Re: Remote oil filter adapter for BB pump [Re: 440Jim] #2656269
05/17/19 01:28 PM
05/17/19 01:28 PM
Joined: Feb 2005
Posts: 20,116
PA.
pittsburghracer Offline
"Little"John
pittsburghracer  Offline
"Little"John

Joined: Feb 2005
Posts: 20,116
PA.
I haven’t finished the oiling system on my head up car but it’s real tight in the oil pump area too

5D899316-B384-4E6E-8770-C698C1FF8173.jpeg5B565A43-4AC9-468D-B2BB-64932E2DDA2A.jpeg

1970 Duster
Edelbrock headed 408
5.984@112.52
422 Indy headed small block
5.982@112.56 mph
9.42@138.27

Livin and lovin life one day at a time




Re: Remote oil filter adapter for BB pump [Re: 440Jim] #2656274
05/17/19 01:48 PM
05/17/19 01:48 PM
Joined: Jan 2003
Posts: 403
southern Maryland
K
keefe Offline
mopar
keefe  Offline
mopar
K

Joined: Jan 2003
Posts: 403
southern Maryland
Hi Jim how are ya ,Nice Daytona.
I saved this article a while back , it might have what your looking for.
Its a 505 build that used a external pump / filter system , the articles was done in 2010
so hopefully the pump parts are available.

https://www.americanmusclecarsaustralia.com/forum/index.php?topic=3526.0


1971 duster twister 440, 3380#,509 M/P hyd,906's,full Exhaust,11.06@117.46 1/4,6.95@ 97.03 1/8,1.497 60ft.....
Re: Remote oil filter adapter for BB pump [Re: keefe] #2656277
05/17/19 02:00 PM
05/17/19 02:00 PM
Joined: Jan 2003
Posts: 30,947
Oregon
A
AndyF Offline
I Win
AndyF  Offline
I Win
A

Joined: Jan 2003
Posts: 30,947
Oregon
That is my old 505

Re: Remote oil filter adapter for BB pump [Re: hemi-itis] #2656289
05/17/19 02:52 PM
05/17/19 02:52 PM
Joined: Dec 2007
Posts: 12,587
Great Neck,LI,new york
hemi-itis Offline
I Live Here
hemi-itis  Offline
I Live Here

Joined: Dec 2007
Posts: 12,587
Great Neck,LI,new york
Originally Posted by hemi-itis
I removed an accusump and a dual remote oil filter set up to a system and replaced it with a system one oil filter.Wish I did it years sooner but we all know how that goes.Andy has a cover so it would be a snap.


2 short hoses from the pump to the filter up

3.4.17 020.jpg2.25.17 016.jpg7.24.17 036.jpg8.15.17 082.jpg

HEMI-ITIS has no cure.
My condition is fully BLOWN!!
Re: Remote oil filter adapter for BB pump [Re: 440Jim] #2656336
05/17/19 05:14 PM
05/17/19 05:14 PM
Joined: Jan 2005
Posts: 2,540
Milwaukee WI
T
TRENDZ Offline
master
TRENDZ  Offline
master
T

Joined: Jan 2005
Posts: 2,540
Milwaukee WI
As mentioned earlier, the milodon cover would be a direct bolt on. All your clearance issues would be gone with that cover. You don’t need to use that cover as an external feed.

D8C86033-753F-4870-ACC9-C6C245D8C7B1.jpeg

"use it 'till it breaks, replace as needed"
Page 1 of 2 1 2






Powered by UBB.threads™ PHP Forum Software 7.7.1