Aluminum water pump housing for BB - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Aluminum water pump housing for BB

Print Thread

Aluminum water pump housing for BB #2653263 05/08/19 06:31 AM 05/08/19 06:31 AM
Joined: Jan 2003 Posts: 6,380 Abilene, Texas F fastmark OP master
fastmark OP master F Joined: Jan 2003 Posts: 6,380 Abilene, Texas	It’s been awhile since I bought one of these and noticed they have gone up. The 440 source is much cheaper than Mancini or summit. Is there’s ok? I heard the pumps may not be that great.

Re: Aluminum water pump housing for BB [Re: fastmark] #2653265 05/08/19 07:06 AM 05/08/19 07:06 AM
Joined: Jan 2005 Posts: 1,771 Keymar, MD DusterKid top fuel
DusterKid top fuel Joined: Jan 2005 Posts: 1,771 Keymar, MD	I've had a 440 source pump and housing on my one car since 2008 and haven't had an issue. I bought the passenger side outlet for my other car about 3 years ago and no issues with it. I'd buy another one.

Re: Aluminum water pump housing for BB [Re: DusterKid] #2653267 05/08/19 07:09 AM 05/08/19 07:09 AM
Joined: Dec 2013 Posts: 4,663 Wichita G GY3 master
GY3 master G Joined: Dec 2013 Posts: 4,663 Wichita	I've run the Source pump and housing for 5700 miles and hundreds of dragstrip passes. No issues at all. '63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.

Re: Aluminum water pump housing for BB [Re: GY3] #2653268 05/08/19 07:12 AM 05/08/19 07:12 AM
Joined: Jan 2003 Posts: 10,019 MN J JERICOGTX I Live Here
JERICOGTX I Live Here J Joined: Jan 2003 Posts: 10,019 MN	On eBay for $53 shipped to your door. https://www.ebay.com/itm/fits-Chrysler-Mopar-BB-360-383-440-High-Volume-Aluminum-Water-Pump-Housing-Ony/291748195503?epid=14004118719&hash=item43ed8c2caf:g:wysAAOSwK~RaAk8L 69 GTX 68 Road Runner

Re: Aluminum water pump housing for BB [Re: JERICOGTX] #2653269 05/08/19 07:15 AM 05/08/19 07:15 AM
Joined: Jun 2006 Posts: 660 Virginia V varunner mopar
varunner mopar V Joined: Jun 2006 Posts: 660 Virginia	I first bought the source housing with the passenger side inlet, made finding a radiator harder. Then bought their standard configure housing. Works fine and would buy again.

Re: Aluminum water pump housing for BB [Re: varunner] #2653288 05/08/19 08:35 AM 05/08/19 08:35 AM
Joined: Jan 2003 Posts: 6,380 Abilene, Texas F fastmark OP master
fastmark OP master F Joined: Jan 2003 Posts: 6,380 Abilene, Texas	Thanks guys.

Re: Aluminum water pump housing for BB [Re: fastmark] #2653426 05/08/19 03:42 PM 05/08/19 03:42 PM
Joined: Oct 2006 Posts: 427 Sweden Mopar Guy mopar
Mopar Guy mopar Joined: Oct 2006 Posts: 427 Sweden	I have had some friends that were unlucky with the 440 Source pump that started to leak after a year or 2 ! I prefer the mp or milodon hv pump and you should look at the clearance so the inpeller dont hit the housing before install but 440 source housings should be fine to use

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1