Previous Thread
Next Thread
Print Thread
Page 1 of 3 1 2 3
Trick Flow sb heads #2632169
03/13/19 08:28 AM
03/13/19 08:28 AM
Joined: Jan 2003
Posts: 11,701
Portage,michigan
B
B3422W5 Offline OP
I Live Here
B3422W5  Offline OP
I Live Here
B

Joined: Jan 2003
Posts: 11,701
Portage,michigan
Will be available to buy in a couple of weeks
They have been produced and are sitting around assembled at Trick flow
They plan to dyno a set yet this month on a 408 test mule. Didnt think to ask Howard how the 408 was setup
Heads should be from 1900-22/2300 bucks fully assembled
The top range will have quality solid roller springs and ti retainers installed.
Intake is going to lag behind by a little bit


69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, 10.40 @127 1/4
1.41 best 60 foot
6.60 at 103.90 1/8

Re: Trick Flow sb heads [Re: B3422W5] #2632440
03/13/19 09:32 PM
03/13/19 09:32 PM
Joined: Feb 2003
Posts: 3,691
MO
C
cdp Offline
master
cdp  Offline
master
C

Joined: Feb 2003
Posts: 3,691
MO
Thanks for the update! I'm curious to see the numbers.

Re: Trick Flow sb heads [Re: cdp] #2632883
03/15/19 06:08 AM
03/15/19 06:08 AM
Joined: Jun 2003
Posts: 2,406
Weatherford, Texas
RapidusMaximus Offline
top fuel
RapidusMaximus  Offline
top fuel

Joined: Jun 2003
Posts: 2,406
Weatherford, Texas
Subscribed...any particular vendor be getting them before anyone else?


1968 Plymouth GTX
1974 Dodge P/U Long Bed Stepside 318
2019 Ram 2500 6.4, auto, 4WD
Re: Trick Flow sb heads [Re: RapidusMaximus] #2632923
03/15/19 09:50 AM
03/15/19 09:50 AM
Joined: Oct 2011
Posts: 3,036
bean town ....Ca
W
WHITEDART Offline
master
WHITEDART  Offline
master
W

Joined: Oct 2011
Posts: 3,036
bean town ....Ca
Keep us in the loop up


In the 8s N/A.with Brett miller W8's
5.07 at 133 at 2700lb
Re: Trick Flow sb heads [Re: RapidusMaximus] #2632931
03/15/19 10:03 AM
03/15/19 10:03 AM
Joined: Aug 2003
Posts: 3,245
Between a rock & a hard place
C
cudadoug Offline
master
cudadoug  Offline
master
C

Joined: Aug 2003
Posts: 3,245
Between a rock & a hard place
Originally Posted by RapidusMaximus
Subscribed...any particular vendor be getting them before anyone else?


I would guess Summit as a mass retailer. They have close ties to TF.

Re: Trick Flow sb heads [Re: cudadoug] #2632936
03/15/19 10:19 AM
03/15/19 10:19 AM
Joined: Jan 2003
Posts: 14,479
So. Burlington, Vt.
F
fast68plymouth Offline
I Live Here
fast68plymouth  Offline
I Live Here
F

Joined: Jan 2003
Posts: 14,479
So. Burlington, Vt.
Originally Posted by cudadoug
Originally Posted by RapidusMaximus
Subscribed...any particular vendor be getting them before anyone else?


I would guess Summit as a mass retailer. They have close ties to TF.


You could say that.
Try a search for “trickflow.com” and see what pops up in your browser.


68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123
Dealer for Comp Cams/Indy Heads
Re: Trick Flow sb heads [Re: cudadoug] #2632955
03/15/19 11:01 AM
03/15/19 11:01 AM
Joined: Jan 2003
Posts: 30,947
Oregon
A
AndyF Offline
I Win
AndyF  Offline
I Win
A

Joined: Jan 2003
Posts: 30,947
Oregon
Originally Posted by cudadoug
Originally Posted by RapidusMaximus
Subscribed...any particular vendor be getting them before anyone else?


I would guess Summit as a mass retailer. They have close ties to TF.


Yeah, they own them.

Re: Trick Flow sb heads [Re: AndyF] #2633274
03/16/19 10:52 AM
03/16/19 10:52 AM
Joined: Jun 2003
Posts: 2,406
Weatherford, Texas
RapidusMaximus Offline
top fuel
RapidusMaximus  Offline
top fuel

Joined: Jun 2003
Posts: 2,406
Weatherford, Texas
Wow...well there ya go...guess that answers that question...lol


1968 Plymouth GTX
1974 Dodge P/U Long Bed Stepside 318
2019 Ram 2500 6.4, auto, 4WD
Re: Trick Flow sb heads [Re: RapidusMaximus] #2635507
03/22/19 10:29 AM
03/22/19 10:29 AM
Joined: Nov 2003
Posts: 2,936
GA
roadrunninMark Offline
master
roadrunninMark  Offline
master

Joined: Nov 2003
Posts: 2,936
GA
Any update on the release date?

Re: Trick Flow sb heads [Re: roadrunninMark] #2635510
03/22/19 10:39 AM
03/22/19 10:39 AM
Joined: Jan 2003
Posts: 30,947
Oregon
A
AndyF Offline
I Win
AndyF  Offline
I Win
A

Joined: Jan 2003
Posts: 30,947
Oregon
Originally Posted by roadrunninMark
Any update on the release date?


Should be soon. We have a set on order and Summit said they would be shipping in April.

Re: Trick Flow sb heads [Re: AndyF] #2635747
03/22/19 11:35 PM
03/22/19 11:35 PM
Joined: Nov 2006
Posts: 1,074
Manitoba Canada
67autocross Offline
super stock
67autocross  Offline
super stock

Joined: Nov 2006
Posts: 1,074
Manitoba Canada
It would be interesting to see a back to back test vs the pro maxx shockers.


A new iron curtain drawn across the 49th parallel
Re: Trick Flow sb heads [Re: 67autocross] #2636169
03/23/19 09:48 PM
03/23/19 09:48 PM
Joined: Aug 2012
Posts: 299
Willow Spring
dagohman Offline
enthusiast
dagohman  Offline
enthusiast

Joined: Aug 2012
Posts: 299
Willow Spring
Originally Posted by 67autocross
It would be interesting to see a back to back test vs the pro maxx shockers.


I called Promaxx last week because I was interested in the cnc'd heads. They said 4 to 6 weeks before they would have any sb Mopar heads.
Im also curious about the Trick Flows. Maybe they'll be out one day...

Re: Trick Flow sb heads [Re: dagohman] #2636332
03/24/19 11:08 AM
03/24/19 11:08 AM
Joined: Nov 2006
Posts: 1,074
Manitoba Canada
67autocross Offline
super stock
67autocross  Offline
super stock

Joined: Nov 2006
Posts: 1,074
Manitoba Canada
Pro Maxx must have sold out of them, a local shop has a 408 going on the dyno in the next few weeks with them and are shooting for 600hp. The heads look good and CNC work is nice.


A new iron curtain drawn across the 49th parallel
Re: Trick Flow sb heads [Re: 67autocross] #2636359
03/24/19 11:45 AM
03/24/19 11:45 AM
Joined: Jan 2003
Posts: 11,701
Portage,michigan
B
B3422W5 Offline OP
I Live Here
B3422W5  Offline OP
I Live Here
B

Joined: Jan 2003
Posts: 11,701
Portage,michigan
Originally Posted by 67autocross
Pro Maxx must have sold out of them, a local shop has a 408 going on the dyno in the next few weeks with them and are shooting for 600hp. The heads look good and CNC work is nice.


Any ported aluminum replacement head better make 600 on a flattop shortblock with some squeeze
Even with a healthy flat tappet.

Last edited by B3422W5; 03/24/19 11:48 AM.

69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, 10.40 @127 1/4
1.41 best 60 foot
6.60 at 103.90 1/8

Re: Trick Flow sb heads [Re: B3422W5] #2640131
04/02/19 10:55 AM
04/02/19 10:55 AM
Joined: Jan 2003
Posts: 11,701
Portage,michigan
B
B3422W5 Offline OP
I Live Here
B3422W5  Offline OP
I Live Here
B

Joined: Jan 2003
Posts: 11,701
Portage,michigan
They start getting shipped Fri.
People will have them in there in hand next week


69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, 10.40 @127 1/4
1.41 best 60 foot
6.60 at 103.90 1/8

Re: Trick Flow sb heads [Re: B3422W5] #2640391
04/02/19 08:51 PM
04/02/19 08:51 PM
Joined: Nov 2006
Posts: 1,074
Manitoba Canada
67autocross Offline
super stock
67autocross  Offline
super stock

Joined: Nov 2006
Posts: 1,074
Manitoba Canada

Originally Posted by B3422W5
Originally Posted by 67autocross
Pro Maxx must have sold out of them, a local shop has a 408 going on the dyno in the next few weeks with them and are shooting for 600hp. The heads look good and CNC work is nice.


Any ported aluminum replacement head better make 600 on a flattop shortblock with some squeeze
Even with a healthy flat tappet.


On our local Dyno I don’t think I know of a pump gas small block that has gone over 600hp unless it had some of the moved push rod W2 or Indy heads on ...I’m assuming if this one can do it with the pro max heads the trick flows should be around the same.


A new iron curtain drawn across the 49th parallel
Re: Trick Flow sb heads [Re: 67autocross] #2640468
04/02/19 11:17 PM
04/02/19 11:17 PM
Joined: Jan 2003
Posts: 11,701
Portage,michigan
B
B3422W5 Offline OP
I Live Here
B3422W5  Offline OP
I Live Here
B

Joined: Jan 2003
Posts: 11,701
Portage,michigan
Originally Posted by 67autocross

Originally Posted by B3422W5
Originally Posted by 67autocross
Pro Maxx must have sold out of them, a local shop has a 408 going on the dyno in the next few weeks with them and are shooting for 600hp. The heads look good and CNC work is nice.


Any ported aluminum replacement head better make 600 on a flattop shortblock with some squeeze
Even with a healthy flat tappet.


On our local Dyno I don’t think I know of a pump gas small block that has gone over 600hp unless it had some of the moved push rod W2 or Indy heads on ...I’m assuming if this one can do it with the pro max heads the trick flows should be around the same.


A zero deck stroker motor with flattops will be well over 12 to 1 with these heads.. it should make over 600 with a suitable cam.


69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, 10.40 @127 1/4
1.41 best 60 foot
6.60 at 103.90 1/8

Re: Trick Flow sb heads [Re: B3422W5] #2640475
04/02/19 11:51 PM
04/02/19 11:51 PM
Joined: Nov 2006
Posts: 1,074
Manitoba Canada
67autocross Offline
super stock
67autocross  Offline
super stock

Joined: Nov 2006
Posts: 1,074
Manitoba Canada
Most of the small block builds around here are pump gas stroker 408-416 inch jobs with a max at say 11:1 that make under 600hp...after that they jump up 700hp and up stuff with big heads and aftermarket blocks. I don’t recall anyone I know really building at 12:1 stroker with a stock style head, this is most likely because it would need race gas and not really make a bunch more power....I’m going to see how this pro maxx stroker does on the dyno before I buy a top end for my stroker.


A new iron curtain drawn across the 49th parallel
Re: Trick Flow sb heads [Re: 67autocross] #2640499
04/03/19 07:25 AM
04/03/19 07:25 AM
Joined: Jan 2003
Posts: 11,701
Portage,michigan
B
B3422W5 Offline OP
I Live Here
B3422W5  Offline OP
I Live Here
B

Joined: Jan 2003
Posts: 11,701
Portage,michigan
Originally Posted by 67autocross
Most of the small block builds around here are pump gas stroker 408-416 inch jobs with a max at say 11:1 that make under 600hp...after that they jump up 700hp and up stuff with big heads and aftermarket blocks. I don’t recall anyone I know really building at 12:1 stroker with a stock style head, this is most likely because it would need race gas and not really make a bunch more power....I’m going to see how this pro maxx stroker does on the dyno before I buy a top end for my stroker.


A 12.5 to 1 stroker will ET a lot better than than a 10 to 1 stroker.
I could care less about having to run race gas. It wont be a daily driver. Might run 100 gallons of fuel through it a summer. Thats700 bucks. Thats putting around town and racing maybe 8 outings a summer


69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, 10.40 @127 1/4
1.41 best 60 foot
6.60 at 103.90 1/8

Re: Trick Flow sb heads [Re: B3422W5] #2643382
04/09/19 07:11 PM
04/09/19 07:11 PM
Joined: Jan 2003
Posts: 17,800
S.E. Michigan
ZIPPY Offline
I Live Here
ZIPPY  Offline
I Live Here

Joined: Jan 2003
Posts: 17,800
S.E. Michigan
IMM has pictures of the new cylinder head on their Fakebook page.


Rich H.

Esse Quam Videri




Page 1 of 3 1 2 3






Powered by UBB.threads™ PHP Forum Software 7.7.1