Previous Thread
Next Thread
Print Thread
ForSale / Wanted - Tools/ Equipment/Trailers - 1st Quarter #2599411
12/31/18 08:27 PM
12/31/18 08:27 PM
Joined: Jan 2003
Posts: 14,215
Norwich CT USA
moparts Offline OP
I Live Here
moparts  Offline OP
I Live Here

Joined: Jan 2003
Posts: 14,215
Norwich CT USA
up

Re: ForSale / Wanted - Tools/ Equipment/Trailers - 1st Quarter [Re: moparts] #2599976
01/01/19 04:44 PM
01/01/19 04:44 PM
Joined: Jan 2003
Posts: 4,570
Metro Detroit
6PAX Offline
master
6PAX  Offline
master

Joined: Jan 2003
Posts: 4,570
Metro Detroit
I'm looking for an 18'-20' enclosed car hauler in the southeast Michigan area. Doesn't have to have all the bells and whistles, just a basic trailer is all I need. I would prefer one that has the driver side exit door though but it is not a must have.

gt340 at wowway.com

Re: 5 gallon red plastic VP fuel jug - New [Re: moparts] #2601012
01/03/19 04:51 PM
01/03/19 04:51 PM
Joined: Apr 2004
Posts: 1,587
Edison, New Jersey
PHYSIXX Offline
pro stock
PHYSIXX  Offline
pro stock

Joined: Apr 2004
Posts: 1,587
Edison, New Jersey
SOLD!!

I have for sale a new VP red square fuel jug P/N 3512. This jug never had fuel put in it. It’s a 5 gallon jug and measures 10” x 10” x 21 ¼” high.

https://www.summitracing.com/parts/vpr-3512

I would like to get $20 for it plus the shipping.

Edison, NJ
rider1454 at aol.com

DSCN4979.JPG (1582 downloads)
DSCN4981.JPG (1581 downloads)
Last edited by PHYSIXX; 01/11/19 05:41 PM.
Brake drum/rotor lathe $300.00 OBO [Re: PHYSIXX] #2602049
01/05/19 08:03 PM
01/05/19 08:03 PM
Joined: Jul 2003
Posts: 325
New Jersey
D
Dartforforty Offline
enthusiast
Dartforforty  Offline
enthusiast
D

Joined: Jul 2003
Posts: 325
New Jersey
Used but in excellent working condition. What you see in the pics is what comes with the sale. Pick up only in Point Pleasant Beach New Jersey. PM through the board for more details. $300.00 OBO

[Linked Image]

[Linked Image]

[Linked Image]

Last edited by Dartforforty; 03/16/19 03:55 PM.
Re: Brake drum/rotor lathe [Re: moparts] #2604358
01/10/19 12:05 PM
01/10/19 12:05 PM
Joined: May 2004
Posts: 1,819
northeast
B
bfly Offline
top fuel
bfly  Offline
top fuel
B

Joined: May 2004
Posts: 1,819
northeast
Wtb good working 18 v Dewalt battery and charger
Pm me here at site Thanks for the ad

PDR (paintless dent removal [Re: moparts] #2606918
01/15/19 02:05 PM
01/15/19 02:05 PM
Joined: Nov 2004
Posts: 7,135
s.w.fl
B
bonefish Offline
master
bonefish  Offline
master
B

Joined: Nov 2004
Posts: 7,135
s.w.fl
these are high quality tools.ive made a ton of money with them but my back and wrist just cant do it any more.375.00 plus shippin.PM me.{{{{SOLD}}}}

Last edited by bonefish; 02/26/19 10:51 AM.
Re: ForSale / Wanted - Tools/ Equipment/Trailers - 1st Quarter [Re: moparts] #2611168
01/23/19 06:37 PM
01/23/19 06:37 PM
Joined: Dec 2005
Posts: 1,462
Mrytle Beach SC
J
johnscudashop Offline
pro stock
johnscudashop  Offline
pro stock
J

Joined: Dec 2005
Posts: 1,462
Mrytle Beach SC
G3 Hemi Lifter bore degree indicator tool... Made for 5.7 6.1 6.4 6.2 Lifter bores. Makes degreeing your camshaft in a G3 hemi a breeze. The body is made from 304 stainless steel and has a o-ring for retention..$100 plus shipping, email me direct at jrivinius@sc.rr.com https://www.youtube.com/watch?v=dwjaryS7YP4

20190116_130852.JPG (1077 downloads)
20190122_110859.JPG (1063 downloads)
WTB Weld Magnum 1-piece GOLD Front Wheels [Re: moparts] #2617066
02/04/19 10:43 PM
02/04/19 10:43 PM
Joined: Jul 2010
Posts: 564
COLUMBUS, OH
W
Whompin_Wedge Offline
mopar
Whompin_Wedge  Offline
mopar
W

Joined: Jul 2010
Posts: 564
COLUMBUS, OH
Looking to buy a pair of Weld Magnum 1 piece fronts. Must be gold.

15x3.5 4.50 bolt pattern.

Thanks!

PARTS TO FINISH VALIANT [Re: Whompin_Wedge] #2617938
02/06/19 06:21 PM
02/06/19 06:21 PM
Joined: Feb 2004
Posts: 30,492
S.E. South Dakota !
bigdad Offline
Still Posting A Lot
bigdad  Offline
Still Posting A Lot

Joined: Feb 2004
Posts: 30,492
S.E. South Dakota !
I need several bits and pieces for the Valiant ..

Converter, it is a 727 --so maybe someone has something to try and get it going budget wise -- 3800-4000 stall

Reverse pattern 727 shifter

Gauges

5 gallon fuel cell

fuel pump

fuel regulator

I bought headers ..just need a few more big items



let me know what you have , I might need it

smallblock.jpg (767 downloads)
Horizontal E Track [Re: bigdad] #2619230
02/09/19 11:25 PM
02/09/19 11:25 PM
Joined: Dec 2003
Posts: 17,591
Trumussia
J
jcc Offline
No politics
jcc  Offline
No politics
J

Joined: Dec 2003
Posts: 17,591
Trumussia
We just parted out one of our dry Freight Semi trailers, we got 20+ pieces of used 10' Kinedyne horizontal E track, made in USA, most is color coded with red/blue/white or grey poly urethane. It has scratches, paint worn thru in places, slight surface rust, structurally is in good useable condition as is. Cannot guarantee color availability. Have misc shorter pieces. Will rough cut, which also reduces shipping costs?, it is 12g? steel, mounts with pre drilled 1/4" bolts, or weld, etc. Weighs approx 13lbs piece. Located in SW Fla, delivery might be possible depending on time frame/location, as we travel east of US.

Looking for $12/ 10' stick

I'll try to post pics Tomorrow.

PM questions


On vacation until 2-15-19 Figuratively
Re: ForSale - Taft Peirce Surface Grinder [Re: moparts] #2619394
02/10/19 03:14 PM
02/10/19 03:14 PM
Joined: Sep 2003
Posts: 10,363
north of coder
moparx Offline
Dreaming of implants
moparx  Offline
Dreaming of implants

Joined: Sep 2003
Posts: 10,363
north of coder
Listing this for a friend.

Taft Peirce Surface Grinder with Brown & Sharp Magnetic Table
Runs as good as it looks.
Asking $1350.00 or Offer ?
Located in Brookville, Pa. - Exit 78, I-80

PM me here, or : moparx@windstream.net
or : 814-541-3221 = Vince

Thank You MOPARTS for the add ! up
beer

PA070013.JPG (868 downloads)
PA070021.JPG (866 downloads)
Re: ForSale / Wanted - Tools/ Equipment/Trailers - 1st Quarter [Re: moparts] #2623159
02/19/19 12:52 AM
02/19/19 12:52 AM
Joined: Nov 2003
Posts: 65
illinois
1
1bad70 Offline
member
1bad70  Offline
member
1

Joined: Nov 2003
Posts: 65
illinois
SOLD!! Thanks


I have a matching pair of Gray Model 100 air jacks rated for 2.5 tons. Both work fine. Asking $225 each.

part0.jpg (714 downloads)
part01.jpg (707 downloads)
Last edited by 1bad70; 03/18/19 03:00 PM. Reason: Sold
Re: ForSale / Wanted - Tools/ Equipment/Trailers - 1st Quarter [Re: moparts] #2628051
03/02/19 08:42 PM
03/02/19 08:42 PM
Joined: Jan 2007
Posts: 1,123
MI
6
68shifter Offline
super stock
68shifter  Offline
super stock
6

Joined: Jan 2007
Posts: 1,123
MI
Sold
Thanks Moparts

Last edited by 68shifter; 03/05/19 12:31 AM.
Re: ForSale / Wanted - Tools/ Equipment/Trailers - 1st Quarter [Re: moparts] #2628796
03/04/19 06:16 PM
03/04/19 06:16 PM
Joined: Feb 2004
Posts: 1,959
Tulsa, Ok
WadeMetzinger Offline
top fuel
WadeMetzinger  Offline
top fuel

Joined: Feb 2004
Posts: 1,959
Tulsa, Ok
For rent - BHJ O-Ring and Receiver Groove Cutter for BB Mopar Wedge/Hemi

I am building a super charged motor for a customer who torched his head and block using copper gaskets without O-rings and the solution was to O-Ring the heads. My machinist didn't have the BHJ plate for BB Mopar and shipping the heads/block to a "Mopar" shop would be expensive so I just bought the plate myself so we could get his motor together. So now I'm making it available to rent out to recoop some of the $750 I have in it.

Rental fee is $150.

This is just the plate, your machinist will need to have the other BHJ tools and just need the plate (most good shops will have them and plates for BB/SB Chevy).

Call or Text me, number in my signature below.

BHJ O-Ring and Reciever Groove Cutter


Wade Metzinger 918-809-0987
71 Cuda 9.28@145 -1s, Pglide
68 Cuda 10.64@124 1.45 60's 318->390 eddys
Moparts discount code on WIX - moparts www.Filter1.com
Re: ForSale A/B Body casters [Re: johnscudashop] #2629827
03/06/19 11:28 PM
03/06/19 11:28 PM
Joined: May 2004
Posts: 5,031
Warrenton, VA
RoadRunnerJD Offline
master
RoadRunnerJD  Offline
master

Joined: May 2004
Posts: 5,031
Warrenton, VA
For Sale: Heavy Duty body moving casters. Bolt pattern designed for both A or B-Body cars. Casters are HD army surplus with 2 pc aluminum wheels. 4 ply Tires with tubes (old but still hold air) Stands are 3x3 steel tubes. $200 plus shipping. These are fairly heavy to ship. Can deliver to Carlisle in July PM me here or text to 703-608-0977

Last edited by RoadRunnerJD; 03/06/19 11:49 PM.
Re: ForSale A/B Body casters [Re: RoadRunnerJD] #2629831
03/06/19 11:38 PM
03/06/19 11:38 PM
Joined: May 2004
Posts: 5,031
Warrenton, VA
RoadRunnerJD Offline
master
RoadRunnerJD  Offline
master

Joined: May 2004
Posts: 5,031
Warrenton, VA
Front ones swivel and rear ones are stationary (rear ones bolt up to front spring mounts)

BHJ Big block honing plate [Re: moparts] #2632051
03/12/19 08:30 PM
03/12/19 08:30 PM
Joined: Sep 2007
Posts: 92
Nv
B
Bill Koski Offline
member
Bill Koski  Offline
member
B

Joined: Sep 2007
Posts: 92
Nv
An aluminum big block honing plate, 4.500 bore.
wirkoski@aol.com


SOLD! Thank you Moparts!

Last edited by Bill Koski; 03/21/19 08:09 PM.

Advertisement
Forum Statistics
Forums32
Topics193,575
Posts2,260,627
Members25,805
Most Online1,424
Jun 20th, 2018
Moparts Newest Topics
7000 RPM Small block oiling mods.
by RUNCHARGER. 03/25/19 10:02 PM
99 ram p/u 2500 V10 2WD oil pan gasket replacement
by moparjo68. 03/25/19 09:27 PM
Valve Springs
by 71birdJ68. 03/25/19 08:38 PM

Powered by UBB.threads™ PHP Forum Software 7.7.1