Distributor adapter to run 440 dist in 400 block? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Distributor adapter to run 440 dist in 400 block?

Print Thread

Distributor adapter to run 440 dist in 400 block? #2545352 09/03/18 09:28 PM 09/03/18 09:28 PM
Joined: Mar 2005 Posts: 3,138 Central NC gch OP master
gch OP master Joined: Mar 2005 Posts: 3,138 Central NC	Can't seem to find these anywhere anymore.Anybody have a source Thanks, George

Re: Distributor adapter to run 440 dist in 400 block? [Re: gch] #2545363 09/03/18 09:52 PM 09/03/18 09:52 PM
Joined: Feb 2003 Posts: 8,669 A Andrewh master
Andrewh master A Joined: Feb 2003 Posts: 8,669	http://www.cuda-challenger.com/cc/index.php?topic=83336.0 they don't make them anymore, but here are the plans.

Re: Distributor adapter to run 440 dist in 400 block? [Re: gch] #2545364 09/03/18 09:53 PM 09/03/18 09:53 PM
Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska	You can cut down the shaft. this will let you set the shaft tang/intergear slot interface dead on (no rotational slop) for no spark scatter when setting the initial at idle. live every 24 hour block of time like it's your last day on earth

Re: Distributor adapter to run 440 dist in 400 block? [Re: gch] #2545435 09/03/18 11:43 PM 09/03/18 11:43 PM
Joined: Jan 2003 Posts: 3,049 Bowling Green, KY C cudaboy master
cudaboy master C Joined: Jan 2003 Posts: 3,049 Bowling Green, KY	http://www.manciniracing.com/rbtobbldiad.html Dennis

Re: Distributor adapter to run 440 dist in 400 block? [Re: gch] #2545830 09/04/18 08:44 PM 09/04/18 08:44 PM
Joined: Mar 2005 Posts: 3,138 Central NC gch OP master
gch OP master Joined: Mar 2005 Posts: 3,138 Central NC	Thanks guys!

Re: Distributor adapter to run 440 dist in 400 block? [Re: gch] #2546403 09/05/18 09:39 PM 09/05/18 09:39 PM
Joined: Mar 2005 Posts: 3,138 Central NC gch OP master
gch OP master Joined: Mar 2005 Posts: 3,138 Central NC	Thanks for the offers and info.Had a friend bugging me to death for one.Turns out it is for a MSD distributor so I told him to buy one from Mancini for the MSD distributor. Thanks again.

Re: Distributor adapter to run 440 dist in 400 block? [Re: gch] #2547845 09/09/18 10:56 AM 09/09/18 10:56 AM
Joined: Mar 2004 Posts: 314 Medina, OH D dart440_72 enthusiast
dart440_72 enthusiast D Joined: Mar 2004 Posts: 314 Medina, OH	I had the same problem. I contacted MSD and bought the replacement shaft and just changed it. It's pretty easy to do. 72 Dart 500" low deck Indy SR heads. 10.40 @129 best so far

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1