Re: Using Trick flow 270 heads
[Re: Blang]
#2508879
06/15/18 01:27 PM
06/15/18 01:27 PM
|
Joined: Jan 2003
Posts: 31,203 Oregon
AndyF
I Win
|
I Win
Joined: Jan 2003
Posts: 31,203
Oregon
|
Using TF 270 heads on a 470 build. HS 70015KE rockers-all good. Engine was built last winter after following a lot of Andy F reads. Spot on, thanks Andy. removed heads from box, checked valve seats and put back together. did install different springs to accommodate cam-280/655 roller. Push rods were measured for exact length needed. ARP stud kit for TF heads and rocker arms. Summit Valve covers-perfect fit. Put in car 3 weeks ago, got some 20+ hits on it, now tuning can begin. No dyno test, just track tuning. so far it appears to be at 750 range. They work nice. Sounds like a good combo. 750 is exactly what I'd expect from 270 heads on a 470 with decent compression and a 280 roller cam. That should be a good engine for you, have fun at the track!
|
|
|
Re: Using Trick flow 270 heads
[Re: Blang]
#2508925
06/15/18 02:48 PM
06/15/18 02:48 PM
|
Joined: Aug 2011
Posts: 2,905 Pattison Texas
CSK
master
|
master
Joined: Aug 2011
Posts: 2,905
Pattison Texas
|
Using TF 270 heads on a 470 build. HS 70015KE rockers-all good. Engine was built last winter after following a lot of Andy F reads. Spot on, thanks Andy. removed heads from box, checked valve seats and put back together. did install different springs to accommodate cam-280/655 roller. Push rods were measured for exact length needed. ARP stud kit for TF heads and rocker arms. Summit Valve covers-perfect fit. Put in car 3 weeks ago, got some 20+ hits on it, now tuning can begin. No dyno test, just track tuning. so far it appears to be at 750 range. They work nice. If you dont mind, some more info, track DA, car weight,et, MPH, gear, what car, compression, Thanks, Charlie
1968 Charger COLD A/C Hilborn EFI 512ci 9.7 compression, Stealth heads, 4.10 gear A518 ODtrans 4100lb,10.93 full street car trim 2020 T/A 392 Stock 11.79 @ 114.5
|
|
|
Re: Using Trick flow 270 heads
[Re: Blang]
#2509024
06/15/18 05:59 PM
06/15/18 05:59 PM
|
Joined: Aug 2011
Posts: 2,905 Pattison Texas
CSK
master
|
master
Joined: Aug 2011
Posts: 2,905
Pattison Texas
|
3330# with me in it, 2245'DA,9.59@138.90, 410 gear, 30 x10.5 tire, 12:1, shift 6800rpm. 68 Barracuda, NSS class running a Modman Intake with 2-800 edelbrocks Thank you !!! Thats AWESOME !!!!!
Last edited by csk; 06/15/18 06:11 PM.
1968 Charger COLD A/C Hilborn EFI 512ci 9.7 compression, Stealth heads, 4.10 gear A518 ODtrans 4100lb,10.93 full street car trim 2020 T/A 392 Stock 11.79 @ 114.5
|
|
|
Re: Using Trick flow 270 heads
[Re: mopar dave]
#2509123
06/15/18 10:02 PM
06/15/18 10:02 PM
|
Joined: Jul 2004
Posts: 19,318 State of confusion
Thumperdart
I Live Here
|
I Live Here
Joined: Jul 2004
Posts: 19,318
State of confusion
|
Yeah. Sounds like a great combo. Dont think my 511 would run that with my edel. Mw port heads. Why not, I'm in the mid 9's and 6-teens w/standard port RPM'S ported by yours truly............. AND with a baby 470 to boot.........
Last edited by Thumperdart; 06/15/18 10:03 PM.
72 Dart 470 n/a BB stroker street car `THUMPER`...Check me out on FB Dominic Thumper for videos and lots of carb pics......760-900-3895.....
|
|
|
|
|