Tony, can you comment on the finish. Are these powdercoated? Thx for the great repo.

Jeff, thanks for the kind words.

they are just painted, easy to remove and refinish to your liking

thanks again
'Tony

I just bought a set! I agree that this is a market changer. 450 wheels are sooooo hard to come by, it was nice to just pick up the phone and spend WAY less.

If you plan to powdercoat them, I am sure the stampings will be buried, just FYI.

Thanks again Tony!

When are the 'H' wheels coming?

Great job as usual Tony for the Folks that really need these.

Not Me of course, you'd have to pay me $995.00 to put them ugly things on any of my cars.

Will you please make a proper 3" trim ring? Pretty decent market for you there...........

Please post a pic (or 2) of the back of the wheel.

I have a set on the way from Tony. It won’t be the last set!!! Thanks Tony!

In addition to JH23's ask, can you also take a pic of the "barrel" in-between the two tire beads? This is the part that is covered by the tire when installed.

these wheels werent made to be counterfeits. they dont have the markings on the inside thats covered by the tire once the tire is installed.

they dont have, but we can add the stamp on the inside of the flange that contacts the drum/rotor once installed if thats what the picture requesters were trying to ask without asking

Very excited about these. I just spent two months digging up olds 442 rims to find it takes a pile of work to convert them to 450 wheels... The day I got my last one these were posted.. Good timing Tony! You got my machine shop money! Now I have some chevy door stops!

I assumed they wouldn't have the markings on the inside of the barrel. That's not why I was asking. I wanted to see the contour of the inner barrel and the tire beads.

Thanks for making these available to everyone...a much needed part! From the pictures, they look spot on.

I spent over 2 years to find a set of originals for my car. I would have bought these if they were available back then.

I salut you Sir!
Great job on a well needed part. I bought the 070 fan clutch & fan blade assembly from you as well as the vent window frames and B-body asttray insert and let me tell you all parts are balls on accurate, thanks again Tony....... A quick question Tony,as 6pacbee asked..... what are the chances of " H " wheels being repro'd in the future ?
Later, BUZZ

depending on how well these sell will effect the chances of making the 1969 15x6 "H" wheel

thank you for your interest

I'm assuming the licensed part is what costs all the money.

Is the whole wheel proprietary to Mopar or just the markings?

If it's just the markings does the price point change for a "bare" wheel?

Kevin

What costs all the money is Tony sticking his neck out to make these. I’m sure he has had plenty of investments that have just not made enough to recoupe the cost of making them. You have to make them with a target price in mind and hope you sell enough to make some money in the long run. All the suttle changes need to please the restoration crowd cost money. If you are in business and don’t make money, then you go out of business.

If interest is a determining factor for reproducing the 'H' wheels, if a set of four was offered for $1000 today, I'd send a full deposit next week.

H wheels are on the radar,

we'll see how well these wheels sell to help make the final decision

thanks for youre interest!

Excellent reproductions. Got my set a week ago. Could not be happier!!

Tony, this may sound silly but could you tell me what a wheel weighs in at?

Thanks

Tom

not a silly question, a single wheel weighs 23 pounds

thanks
Tony