Re: 511 project
[Re: mopar dave]
#2345502
07/30/17 12:05 AM
07/30/17 12:05 AM
|
Joined: Aug 2011
Posts: 2,905 Pattison Texas
CSK
master
|
master
Joined: Aug 2011
Posts: 2,905
Pattison Texas
|
my ECP works great !!! 512cid, cold AC, 105 outside temps, 185ish all day long
1968 Charger COLD A/C Hilborn EFI 512ci 9.7 compression, Stealth heads, 4.10 gear A518 ODtrans 4100lb,10.93 full street car trim 2020 T/A 392 Stock 11.79 @ 114.5
|
|
|
Re: 511 project
[Re: mopar dave]
#2345507
07/30/17 12:36 AM
07/30/17 12:36 AM
|
Joined: Aug 2011
Posts: 2,905 Pattison Texas
CSK
master
|
master
Joined: Aug 2011
Posts: 2,905
Pattison Texas
|
18" 7 blade direct,Flex a lite
1968 Charger COLD A/C Hilborn EFI 512ci 9.7 compression, Stealth heads, 4.10 gear A518 ODtrans 4100lb,10.93 full street car trim 2020 T/A 392 Stock 11.79 @ 114.5
|
|
|
Re: 511 project
[Re: mopar dave]
#2345531
07/30/17 01:21 AM
07/30/17 01:21 AM
|
Joined: Aug 2011
Posts: 2,905 Pattison Texas
CSK
master
|
master
Joined: Aug 2011
Posts: 2,905
Pattison Texas
|
things could make noise, converter not full, no load on the front pump.
1968 Charger COLD A/C Hilborn EFI 512ci 9.7 compression, Stealth heads, 4.10 gear A518 ODtrans 4100lb,10.93 full street car trim 2020 T/A 392 Stock 11.79 @ 114.5
|
|
|
Re: 511 project
[Re: mopar dave]
#2345561
07/30/17 03:54 AM
07/30/17 03:54 AM
|
Joined: Aug 2011
Posts: 2,905 Pattison Texas
CSK
master
|
master
Joined: Aug 2011
Posts: 2,905
Pattison Texas
|
yes fire it up in neutral with 5, or more qts already in it before you start it. I like to have the wheels off the ground on stands
Last edited by csk; 07/30/17 03:57 AM.
1968 Charger COLD A/C Hilborn EFI 512ci 9.7 compression, Stealth heads, 4.10 gear A518 ODtrans 4100lb,10.93 full street car trim 2020 T/A 392 Stock 11.79 @ 114.5
|
|
|
Re: 511 project
[Re: mopar dave]
#2345623
07/30/17 10:42 AM
07/30/17 10:42 AM
|
Joined: May 2011
Posts: 4,492 northern,Ohio,USA
Clanton
master
|
master
Joined: May 2011
Posts: 4,492
northern,Ohio,USA
|
Egineered cooling products Radiator is in. Surprised how well the summit shroud fit radiator and fan. Think this will cool? That looks real good!Soon you will be tuning on that carb and that will be fun.
|
|
|
Re: 511 project
[Re: mopar dave]
#2345662
07/30/17 12:16 PM
07/30/17 12:16 PM
|
Joined: May 2011
Posts: 4,492 northern,Ohio,USA
Clanton
master
|
master
Joined: May 2011
Posts: 4,492
northern,Ohio,USA
|
I have Doms number for that. Shouldn't be too far off. Had Dom and Mark whittier insite on dominator build. That is great to have some tech help from builders who know how.I used a 1050 in the 1990's[n/a] with a .509 and a .590 cam and liked it. ps:Don't take my continued post's as me being a know it all,I am just making conversation.
Last edited by Clanton; 07/30/17 12:25 PM.
|
|
|
Re: 511 project
[Re: mopar dave]
#2345669
07/30/17 12:28 PM
07/30/17 12:28 PM
|
Joined: May 2011
Posts: 4,492 northern,Ohio,USA
Clanton
master
|
master
Joined: May 2011
Posts: 4,492
northern,Ohio,USA
|
yep, always up on stands during break in. Do you have a deep trans pan?I think as long as you have 1.5 qts in the vert and about 7 in the pan the trans should be ok with the main concern being the vert being dry.
|
|
|
Re: 511 project
[Re: mopar dave]
#2345763
07/30/17 04:25 PM
07/30/17 04:25 PM
|
Joined: May 2011
Posts: 4,492 northern,Ohio,USA
Clanton
master
|
master
Joined: May 2011
Posts: 4,492
northern,Ohio,USA
|
I'm using a six pack hood. hoping filter clears. I believe i put a 86/93 in it with a 6.5pv Nice!I was able to tune good vacuum so I hope you can also.I also wanted to say I use a Tee handle on the corner valve cover studs and it makes things easy to undo.
Last edited by Clanton; 07/30/17 04:38 PM.
|
|
|
|
|