Looking to get a new set of rocker arms in a 1.6 ratio. Just not sure who's make or what to get? Had 1.5 Crane iron ductile then switched to what i thought was a comp roller tipped steel rocker but really not sure anymore?
I liked the look of Hughes roller tipped rocker in a 1.6

408 stroker with KB744 pistons and MP 590 cam,Eddy heads .150 p/v clearance with 1.5 rockers

I have been real happy with the Hughes 1.6 roller tip rockers that have been on my 493 since 2011 and still in great shape. Ron

Harland sharp, mancini, hughes and you could try RAS(rocker arm specialties) or give muscle motors a call to see what they have.

I have run Hughes 1.6 rockers on my blown 408 for a long time with no issues. 7K shifts and slightly over that through the lights. Set the lash tight at .012" for my cam.

Yella Terra 1.65's & B3 Racing geometry kit.

I wish Erson still made small block rockers. I have a set on my 360 that have been great but are starting to show some wear.

These are the Hughes rockers I was thinking of

http://www.hughesengines.com/Tools/Utils...amp;maxSize=550