Re: New Wedge and Hemi blocks
[Re: moparroad]
#2127877
08/08/16 02:16 PM
08/08/16 02:16 PM
|
Joined: Nov 2004
Posts: 6,890 North Alabama
Monte_Smith
master
|
master
Joined: Nov 2004
Posts: 6,890
North Alabama
|
Bryant is in the same boat............call them and you should expect a 3 month answer on time frame and feel lucky if you actually get it within that time.
We are building a new 5.0 motor right now. The size we chose was STRICTLY based on the crank we could get in a reasonable time frame. We found one in process for another guy who had changed his mind and we took what we could get. They machined it and set it aside until we got an approx. bobweight. After we gave them a weight, was a month before they could get to THAT
Last edited by Monte_Smith; 08/08/16 02:21 PM.
|
|
|
Re: New Wedge and Hemi blocks
[Re: Al_Alguire]
#2128397
08/09/16 01:03 AM
08/09/16 01:03 AM
|
Joined: Jul 2004
Posts: 19,318 State of confusion
Thumperdart
I Live Here
|
I Live Here
Joined: Jul 2004
Posts: 19,318
State of confusion
|
A bit off topic for sure but one more pic you guys might enjoy. This was a crank made for a cup team based off of some European engineering suggestions. Needless to say it did not work at all. But an interesting piece none the less. They call is a dognut crank for obvious reasons. Looks crazy and this is how we learn what works and what doesn't...........
72 Dart 470 n/a BB stroker street car `THUMPER`...Check me out on FB Dominic Thumper for videos and lots of carb pics......760-900-3895.....
|
|
|
Re: New Wedge and Hemi blocks
[Re: moparroad]
#2132327
08/13/16 11:36 PM
08/13/16 11:36 PM
|
Joined: Mar 2006
Posts: 1,229 In The Hills
jughed
pro stock
|
pro stock
Joined: Mar 2006
Posts: 1,229
In The Hills
|
I wasnt able to make it to Norwalk over the weekend and I'm curious if anyone may have gotten any more info about the new blocks from the guys at MM. Or if anyone got any pics of the new blocks can you post them up. Thanks Aaron MM brought this unfinished casting to MoPar Nationals. And it's a LOW DECK block... been waiting for one of these. The "MM" logo is above the oil pump location
|
|
|
Re: New Wedge and Hemi blocks
[Re: moparroad]
#2132357
08/14/16 12:13 AM
08/14/16 12:13 AM
|
Joined: Aug 2007
Posts: 2,449 nc
earthmover
top fuel
|
top fuel
Joined: Aug 2007
Posts: 2,449
nc
|
|
|
|
Re: New Wedge and Hemi blocks
[Re: moparroad]
#2132363
08/14/16 12:17 AM
08/14/16 12:17 AM
|
Joined: Jan 2005
Posts: 2,540 Milwaukee WI
TRENDZ
master
|
master
Joined: Jan 2005
Posts: 2,540
Milwaukee WI
|
Looks like low deck hemi with wedge motor mounts.
"use it 'till it breaks, replace as needed"
|
|
|
Re: New Wedge and Hemi blocks
[Re: TRENDZ]
#2132368
08/14/16 12:26 AM
08/14/16 12:26 AM
|
Joined: Mar 2006
Posts: 1,229 In The Hills
jughed
pro stock
|
pro stock
Joined: Mar 2006
Posts: 1,229
In The Hills
|
Looks like low deck hemi with wedge motor mounts. was told that they can be machined for Hemi, or Wedge style mounts
|
|
|
Re: New Wedge and Hemi blocks
[Re: moparroad]
#2132380
08/14/16 12:39 AM
08/14/16 12:39 AM
|
Joined: Jan 2005
Posts: 2,540 Milwaukee WI
TRENDZ
master
|
master
Joined: Jan 2005
Posts: 2,540
Milwaukee WI
|
Looks like a real nice casting from what the pics show. I wish them well. Nice to have the options they are offering.
"use it 'till it breaks, replace as needed"
|
|
|
Re: New Wedge and Hemi blocks
[Re: ppmracing]
#2132570
08/14/16 11:54 AM
08/14/16 11:54 AM
|
Joined: Mar 2009
Posts: 1,169 Virginia Beach, VA
Old School
super stock
|
super stock
Joined: Mar 2009
Posts: 1,169
Virginia Beach, VA
|
Wonder how much does it weigh??
68 cuda formula S 588" bb 5sp 70 CUDA CONVERT 500" 5SP (SUBLIME) 70 CUDA CONVERT 500" 5SP (PLUMCRAZY):TOO MUCH HORSEPOWER, IS ALMOST ENOUGH!
|
|
|
Re: New Wedge and Hemi blocks
[Re: sgcuda]
#2164447
09/29/16 03:53 PM
09/29/16 03:53 PM
|
Joined: Dec 2007
Posts: 12,593 Great Neck,LI,new york
hemi-itis
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 12,593
Great Neck,LI,new york
|
Man, that's a lot of cranks. (without starting a pissing match) are they American made? Feel free not to answer.
I lived on Long Island and worked in Ronkonkoma before moving to NC. Never got the opportunity to run down to Bill Mitchell. For that matter, never went over to Kooks either. They were located in Dix Hills. Don't know if Jack Merkell is still around. I had Lee at Lab Machine do all of my work. Real smart guy. Great at thinking out of the box. Scott Merkell is still crankin engines out.Lee is still in space.American is still here doing headers and exhaust.
HEMI-ITIS has no cure. My condition is fully BLOWN!!
|
|
|
Re: New Wedge and Hemi blocks
[Re: fuseable]
#2175587
10/16/16 12:11 AM
10/16/16 12:11 AM
|
Joined: Jan 2003
Posts: 4,334 Morrow, OH
markz528
master
|
master
Joined: Jan 2003
Posts: 4,334
Morrow, OH
|
Any news on the Muscle Motors block? Anybody have there hands on one yet? I have not checked on a while, but mine is cast and was waiting to be machined.
67 Coronet 500 9.610 @ 139.20 mph 67 Coronet 500 (street car) 14.82 @ 94 mph 69 GTX (clone) - build in progress......
|
|
|
|
|