440-1 heads w572 -13 pistons ? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 440-1 heads w572 -13 pistons ?

Print Thread

440-1 heads w572 -13 pistons ? #2166186 10/01/16 11:28 PM 10/01/16 11:28 PM
Joined: Jul 2013 Posts: 52 canada F fast414 OP member
fast414 OP member F Joined: Jul 2013 Posts: 52 canada	Want to put 440-1 heads on a short block with 572-13 pistons.....will the valve notches work ?

Re: 440-1 heads w572 -13 pistons ? [Re: fast414] #2166464 10/02/16 02:43 PM 10/02/16 02:43 PM
Joined: Jul 2013 Posts: 52 canada F fast414 OP member
fast414 OP member F Joined: Jul 2013 Posts: 52 canada	Nobody ???????

Re: 440-1 heads w572 -13 pistons ? [Re: fast414] #2166496 10/02/16 03:25 PM 10/02/16 03:25 PM
Joined: Jan 2003 Posts: 5,762 Hot Rod Ridge FastmOp master
FastmOp master Joined: Jan 2003 Posts: 5,762 Hot Rod Ridge	I never try'd. Use clay and check the radial clearance

Re: 440-1 heads w572 -13 pistons ? [Re: fast414] #2166518 10/02/16 04:17 PM 10/02/16 04:17 PM
Joined: Jan 2003 Posts: 2,915 A shed in England Tig master
Tig master Joined: Jan 2003 Posts: 2,915 A shed in England	I would have thought so, I went the other way from -1's to 572-13's and the valves clipped radially but the depth wasn't an issue (used the same cam). I'd still check it though. '74 Challenger..9.46 @ 145.9 1/4, 6.001 @ 118 1/8 so far. 4023lb !!! # N/A, Marsh performance 655ci, Indy Maxx, T/R, Indy 600-13 X's, Street legal, pump gas, full interior, Cal-Tracs, mufflers, 3:73's and real 10.5 radials. 9.51 @ 142.4 1/4, 6.003 @ 114 1/8 with our old mule KB, 572-13, 580 wedge. RHD '68 Barracuda Fastback 323ci street/strip. Best ET 13.88 @ 99.03

Re: 440-1 heads w572 -13 pistons ? [Re: fast414] #2166698 10/02/16 09:52 PM 10/02/16 09:52 PM
Joined: Jul 2013 Posts: 52 canada F fast414 OP member
fast414 OP member F Joined: Jul 2013 Posts: 52 canada	Ok thanks guys I haven't purchase the short yet .i just wanted to make sure I didn't have to buy new pistons

Re: 440-1 heads w572 -13 pistons ? [Re: fast414] #2166728 10/02/16 10:44 PM 10/02/16 10:44 PM
Joined: Feb 2005 Posts: 20,164 PA. pittsburghracer "Little"John
pittsburghracer "Little"John Joined: Feb 2005 Posts: 20,164 PA.	Originally Posted By fast414 Ok thanks guys I haven't purchase the short yet .i just wanted to make sure I didn't have to buy new pistons Its easy enough for the right guy to fly-cut the pistons if needed. Tom Hemphill in PA fly-cut my 440-1 pistons so I could also run my B1 heads. 1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27 Livin and lovin life one day at a time

Re: 440-1 heads w572 -13 pistons ? [Re: pittsburghracer] #2166765 10/02/16 11:44 PM 10/02/16 11:44 PM
Joined: Aug 2003 Posts: 1,574 K KOS pro stock
KOS pro stock K Joined: Aug 2003 Posts: 1,574	Originally Posted By pittsburghracer Originally Posted By fast414 Ok thanks guys I haven't purchase the short yet .i just wanted to make sure I didn't have to buy new pistons Its easy enough for the right guy to fly-cut the pistons if needed. Tom Hemphill in PA fly-cut my 440-1 pistons so I could also run my B1 heads. thats good to know ....i figured the same why couldnt you just cut new notches but i was told from a couple different mopar builders that i would need new pistons going from -1s to b1s......maybe pistons end up being thin?guess it depends on what you have for pistons to begin with.

Re: 440-1 heads w572 -13 pistons ? [Re: fast414] #2166805 10/03/16 12:46 AM 10/03/16 12:46 AM
Joined: Jun 2009 Posts: 877 ky 68roadrunner super stock
68roadrunner super stock Joined: Jun 2009 Posts: 877 ky	works fine on my flat top pistons. i ordered -13 pistons then put my -1 heads on them now i have the pistons if i want to change to the bigger head hope this helps

Re: 440-1 heads w572 -13 pistons ? [Re: 68roadrunner] #2166875 10/03/16 03:25 AM 10/03/16 03:25 AM
Joined: Aug 2003 Posts: 43,127 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,127 Bend,OR USA	Who makes and sells the 572-13 heads and what block and bore size will they work on? How well do they flow and what size valves are in them? Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: 440-1 heads w572 -13 pistons ? [Re: fast414] #2166879 10/03/16 04:03 AM 10/03/16 04:03 AM
Joined: Jan 2003 Posts: 19,361 Las Vegas Al_Alguire I Live Here
Al_Alguire I Live Here Joined: Jan 2003 Posts: 19,361 Las Vegas	Indy heads. Similar to a B1 "I am not ashamed to confess I am ignorant of what I do not know." "It's never wrong to do the right thing"

Re: 440-1 heads w572 -13 pistons ? [Re: Cab_Burge] #2166933 10/03/16 11:10 AM 10/03/16 11:10 AM
Joined: Aug 2003 Posts: 1,574 K KOS pro stock
KOS pro stock K Joined: Aug 2003 Posts: 1,574	Originally Posted By Cab_Burge Who makes and sells the 572-13 heads and what block and bore size will they work on? How well do they flow and what size valves are in them? they dont flow much better than a -1 and need 4.5 bore....can have larger port volume than -1 when fully ported guess thats the advantage with a bigger cube motor.

Re: 440-1 heads w572 -13 pistons ? [Re: KOS] #2167232 10/03/16 07:14 PM 10/03/16 07:14 PM
Joined: Mar 2009 Posts: 1,169 Virginia Beach, VA O Old School super stock
Old School super stock O Joined: Mar 2009 Posts: 1,169 Virginia Beach, VA	Originally Posted By KOS Originally Posted By Cab_Burge Who makes and sells the 572-13 heads and what block and bore size will they work on? How well do they flow and what size valves are in them? they dont flow much better than a -1 and need 4.5 bore....can have larger port volume than -1 when fully ported guess thats the advantage with a bigger cube motor. my 572-13,s flowed 410cfm, with a 335cc port...... 68 cuda formula S 588" bb 5sp 70 CUDA CONVERT 500" 5SP (SUBLIME) 70 CUDA CONVERT 500" 5SP (PLUMCRAZY):TOO MUCH HORSEPOWER, IS ALMOST ENOUGH!

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1