Hi all, looking to find out correct placement/distance for cuda emblem on tail panel in correlation with the by plymouth emblem. Spacing right to left and spacing top to bottom, thanks

The placement varied do to human error on the Hamtramck assembly line, however this pic is from a low mile true survivor car.

Yes, and a Survivor is hard to argue right? That said, I have seen a fair amount of variability on the placement of these.

Here is another survivor (orange car) and an O.E. restored example, (red car) the original locations were carefully measured before the restoration so it should be faithful to how it was originally. This example closely matches the engineering drawings I've seen.

Except when mounted upside down

The offset one is the one I have seen the most on original cars

Here is a drawing showing the factory placement (not sure of 70 or 71)