Previous Thread
Next Thread
Print Thread
Page 19 of 19 1 2 17 18 19
Re: Pics of your lowered 72-93 Dodge trucks [Re: 76dodgeboy] #2048568
04/07/16 02:24 AM
04/07/16 02:24 AM
Joined: Apr 2016
Posts: 1
orrstown pa
L
lucky717 Offline
member
lucky717  Offline
member
L

Joined: Apr 2016
Posts: 1
orrstown pa
just adding .02 gm 2" shackles work instead off moving the bracket up

Re: Pics of your lowered 72-93 Dodge trucks [Re: 76dodgeboy] #2049303
04/07/16 11:08 PM
04/07/16 11:08 PM
Joined: Feb 2011
Posts: 440
Marysville, WA
77ProStreet Offline
mopar
77ProStreet  Offline
mopar

Joined: Feb 2011
Posts: 440
Marysville, WA
I forgot I had done that on my tubbed 78, it made it real easy to lower the rear and no money out of pocket. up

Last edited by 77ProStreet; 04/07/16 11:13 PM.
Re: Pics of your lowered 72-93 Dodge trucks [Re: 76dodgeboy] #2049436
04/08/16 02:17 AM
04/08/16 02:17 AM
Joined: Nov 2003
Posts: 1,874
Pittsburgh,PA
RTSrunner Offline
top fuel
RTSrunner  Offline
top fuel

Joined: Nov 2003
Posts: 1,874
Pittsburgh,PA
What era & model GM 2" shackles work on these? ~RT

Re: Pics of your lowered 72-93 Dodge trucks [Re: lucky717] #2050428
04/09/16 03:04 PM
04/09/16 03:04 PM
Joined: Oct 2005
Posts: 6,048
Back home in PA
B
BulletBob Offline
master
BulletBob  Offline
master
B

Joined: Oct 2005
Posts: 6,048
Back home in PA
Originally Posted By lucky717
just adding .02 gm 2" shackles work instead off moving the bracket up

Lucky Have you seen my truck?

Re: Pics of your lowered 72-93 Dodge trucks [Re: 76dodgeboy] #2117921
07/26/16 08:02 AM
07/26/16 08:02 AM
Joined: Jul 2016
Posts: 3
Missouri
8
84d150 Offline
member
84d150  Offline
member
8

Joined: Jul 2016
Posts: 3
Missouri
Originally Posted By 76dodgeboy
I think 245/45s are a bit short But Im not there yet. manna Locate a couple used ones for mock up but Im pretty set on being 27-28" tall with the tire. 245/45s are 26". I've mounted them in a v6 mustang before. I plan to sit close to the truck in the pic. No its not bagged in the pic. Its static. He has 20" Ram steelies



How did he get it that low static? This is the look in going for. Iv already got Dakota drop spindles. Debating on van Lcas. But besides ride quality vs spring cut is there any other benefit? It "looks" like the van Lcas still change camber and steering linkage angles the same as cut springs (with the same drop). Unless I'm wrong.

I want the engine cross member 1.5 or 2 inches from the ground. Or at least to tuck a 15 inch wheel to the fender lip. Or more. Which ever could come first? The back will be the easy part so any insight would be appreciated. Iv been scouring the Internet for info... Not much to go on... And it seems as if everyone is either pro street or only looking to go a few inches and maintain ride quality. Truck is just a weekend hot rod. I want it on the ground. Static.

Re: Pics of your lowered 72-93 Dodge trucks [Re: 76dodgeboy] #2118337
07/26/16 06:26 PM
07/26/16 06:26 PM
Joined: Jul 2016
Posts: 3
Missouri
8
84d150 Offline
member
84d150  Offline
member
8

Joined: Jul 2016
Posts: 3
Missouri
Bump

Re: Pics of your lowered 72-93 Dodge trucks [Re: 76dodgeboy] #2120382
07/29/16 04:03 AM
07/29/16 04:03 AM
Joined: Jul 2016
Posts: 3
Missouri
8
84d150 Offline
member
84d150  Offline
member
8

Joined: Jul 2016
Posts: 3
Missouri
Bump

Re: Pics of your lowered 72-93 Dodge trucks [Re: rickstershemi] #2687694
08/14/19 01:11 PM
08/14/19 01:11 PM
Joined: Aug 2019
Posts: 1
Wi
L
Littlered89 Offline
member
Littlered89  Offline
member
L

Joined: Aug 2019
Posts: 1
Wi
Hey all, I'm new here. I didn't see an introduction page so I'm jumping right in. I don't have a pic of my truck lowered but I want to lower it. I found a pic of a truck on Google and it lead me here. The pic was put in by "rickstershemi" I'm curious about the front spring perch flip. Any info you can give me is greatly appreciated. I have been looking for a way to lower the back end of my truck for about a year and haven't found a cheap way to do it yet. Thanks again.

Re: Pics of your lowered 72-93 Dodge trucks *DELETED* [Re: Kevin I] #2906965
04/05/21 06:46 PM
04/05/21 06:46 PM
Joined: Sep 2005
Posts: 661
Iowa
J
jon01 Offline
mopar
jon01  Offline
mopar
J

Joined: Sep 2005
Posts: 661
Iowa
Originally Posted by Kevin I
[Linked Image]
[Linked Image]



Kevin, what do you have for lowering components on your truck in these pictures?


68 Charger R/T - #'s matching car, 499/727/3.91
Re: Pics of your lowered 72-93 Dodge trucks *DELETED* [Re: jon01] #3025590
03/19/22 10:36 PM
03/19/22 10:36 PM
Joined: Nov 2004
Posts: 129
san jose,ca
S
sensi Offline
member
sensi  Offline
member
S

Joined: Nov 2004
Posts: 129
san jose,ca
Bringing this one back to quickly ask whether or not it is necessary to install van tie rod adjusting sleeves when you swap the van LCAs in?
Thanks in advance

Re: Pics of your lowered 72-93 Dodge trucks *DELETED* [Re: sensi] #3026265
03/22/22 04:54 AM
03/22/22 04:54 AM
Joined: Jan 2003
Posts: 21,599
San Jose,CA
migsBIG Offline
YouTube is my go-to news source
migsBIG  Offline
YouTube is my go-to news source

Joined: Jan 2003
Posts: 21,599
San Jose,CA
I don't think you need that part from a van, but have you checked to see if it has the same part number/interchange?

Page 19 of 19 1 2 17 18 19






Powered by UBB.threads™ PHP Forum Software 7.7.1