Previous Thread
Next Thread
Print Thread
Page 16 of 16 1 2 14 15 16
Re: Dakota spindles on 73 clubcab done (almost) [Re: ramblebee] #2059991
04/22/16 10:22 PM
04/22/16 10:22 PM
Joined: Aug 2006
Posts: 8,064
Iowa
76dodgeboy Offline
master
76dodgeboy  Offline
master

Joined: Aug 2006
Posts: 8,064
Iowa
Reem it from the top

Re: Dakota spindles on 73 clubcab done (almost) [Re: ramblebee] #2060156
04/23/16 03:33 AM
04/23/16 03:33 AM
Joined: Jul 2007
Posts: 735
Pa. U.S.A.
moparborn Offline
super stock
moparborn  Offline
super stock

Joined: Jul 2007
Posts: 735
Pa. U.S.A.
No good from the top
The tie rod hits the rotor.

Last edited by moparborn; 04/25/16 11:16 PM.
Re: Dakota spindles on 73 clubcab done (almost) [Re: ramblebee] #2061730
04/25/16 11:14 PM
04/25/16 11:14 PM
Joined: Jul 2007
Posts: 735
Pa. U.S.A.
moparborn Offline
super stock
moparborn  Offline
super stock

Joined: Jul 2007
Posts: 735
Pa. U.S.A.
Heim joints on top or bottom(which ever way to get the least bump steer),I am making an adjuster sleeve to go from stock inner tie rods to the heim joints at the spindles.

Re: Dakota spindles on 73 clubcab done (almost) [Re: ramblebee] #2311013
05/25/17 04:11 PM
05/25/17 04:11 PM
Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
ric3xrt Offline
pro stock
ric3xrt  Offline
pro stock

Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
One of the best truck threads in the section


Truth has no agenda, but those with an agenda make their own truth.
Some of us are so open minded they only see their View



Re: Dakota spindles on 73 clubcab done (almost) [Re: ramblebee] #2343719
07/26/17 03:03 PM
07/26/17 03:03 PM
Joined: Dec 2005
Posts: 1,462
Mrytle Beach SC
J
johnscudashop Offline
pro stock
johnscudashop  Offline
pro stock
J

Joined: Dec 2005
Posts: 1,462
Mrytle Beach SC
Anyone have a picture on how they did the Heim Joints and custom tierod sleeves. Speedway motors has the 11/16 18 Tie Rod sleeves custom lenths, Although I might make my own or at
least give me a length

Last edited by johnscudashop; 08/17/17 10:21 PM.
Re: Dakota spindles on 73 clubcab done (almost) [Re: ramblebee] #2356604
08/19/17 03:09 PM
08/19/17 03:09 PM
Joined: Dec 2005
Posts: 1,462
Mrytle Beach SC
J
johnscudashop Offline
pro stock
johnscudashop  Offline
pro stock
J

Joined: Dec 2005
Posts: 1,462
Mrytle Beach SC
Moparborn is supposed to get a length on the sleeves, maybe we get a picture too

Page 16 of 16 1 2 14 15 16






Powered by UBB.threads™ PHP Forum Software 7.7.1