Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
Skinny front radials, part 2 #1951903
11/15/15 09:34 PM
11/15/15 09:34 PM
Joined: Jan 2003
Posts: 17,918
Akron, Ohio
ProSport Offline OP
I Live Here
ProSport  Offline OP
I Live Here

Joined: Jan 2003
Posts: 17,918
Akron, Ohio
I'm having a terrible time deciding which tire to buy, only because I want the TALLEST one and with all the weird actual numbers you hear about with these front radial tires it's hard to decide. I have a 15x4" wheel and I have a Duster so I have to stick with a 26" tire, I run a 275/60/15 radial on the back. My Sportsman front tires only measure 80" in circumference, I'd love to find something that truly is 81" or slightly bigger. I could take a tape measure to Summit and check out all 3 tires but they won't be mounted so the measurements may be useless.?
Info I've gathered so far........

Hoosier #19050 is 80.5" circumference, $204 each and are in stock at Summit. I'd love to measure a mounted set of these to see what the actual circumference is.
http://www.summitracing.com/parts/hoo-19050

M&H #ROD02 is 81.7" circumference, $182 each and are in stock at Summit. To me the tread kinda looks like a dirt track tread but I've heard people say they look good like a drag tire.
http://www.summitracing.com/parts/mnh-rod02

M/T #6652 is advertised as 81.6" circumference but I'm doubting that since everyone says they're about 25.25" tall and that's how tall my Sportsmans are, and they are only 80" in circumference.
They are in stock at Summit and cost $188.73 each.
http://www.summitracing.com/oh/parts/mtt-6652

Do any of you guys own any of these tires?


1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual
Re: Skinny front radials, part 2 [Re: ProSport] #1951919
11/15/15 09:55 PM
11/15/15 09:55 PM
Joined: Nov 2003
Posts: 1,839
NW Indiana
F
fbs63 Offline
top fuel
fbs63  Offline
top fuel
F

Joined: Nov 2003
Posts: 1,839
NW Indiana
Bob, My son has a set of the MTs on 4"wheels. I can measure them and post some pics but not till tomorrow evening.

Re: Skinny front radials, part 2 [Re: ProSport] #1951926
11/15/15 10:04 PM
11/15/15 10:04 PM
Joined: Feb 2014
Posts: 655
Huntsville, AL
A
Airwoofer Offline
mopar
Airwoofer  Offline
mopar
A

Joined: Feb 2014
Posts: 655
Huntsville, AL
I have really skinnys on the other Demon. May be one of those. I'll check tomorrow.

Re: Skinny front radials, part 2 [Re: ProSport] #1951927
11/15/15 10:06 PM
11/15/15 10:06 PM
Joined: Jan 2003
Posts: 3,009
Covington Georgia
RV2 Offline
master
RV2  Offline
master

Joined: Jan 2003
Posts: 3,009
Covington Georgia
That M&H is 173.99 at jegs

Re: Skinny front radials, part 2 [Re: fbs63] #1951940
11/15/15 10:18 PM
11/15/15 10:18 PM
Joined: Jan 2003
Posts: 17,918
Akron, Ohio
ProSport Offline OP
I Live Here
ProSport  Offline OP
I Live Here

Joined: Jan 2003
Posts: 17,918
Akron, Ohio
Originally Posted By fbs63
Bob, My son has a set of the MTs on 4"wheels. I can measure them and post some pics but not till tomorrow evening.


That would be much appreciated! up


1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual
Re: Skinny front radials, part 2 [Re: RV2] #1951943
11/15/15 10:21 PM
11/15/15 10:21 PM
Joined: Jan 2003
Posts: 17,918
Akron, Ohio
ProSport Offline OP
I Live Here
ProSport  Offline OP
I Live Here

Joined: Jan 2003
Posts: 17,918
Akron, Ohio
Originally Posted By RV2
That M&H is 173.99 at jegs


Thanks


1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual
Re: Skinny front radials, part 2 [Re: ProSport] #1951961
11/15/15 10:45 PM
11/15/15 10:45 PM
Joined: Jan 2003
Posts: 3,009
Covington Georgia
RV2 Offline
master
RV2  Offline
master

Joined: Jan 2003
Posts: 3,009
Covington Georgia
I like the M&H, I might do those with the 4" steel wheels on my Valiant

Re: Skinny front radials, part 2 [Re: RV2] #1951972
11/15/15 10:57 PM
11/15/15 10:57 PM
Joined: Jan 2003
Posts: 17,918
Akron, Ohio
ProSport Offline OP
I Live Here
ProSport  Offline OP
I Live Here

Joined: Jan 2003
Posts: 17,918
Akron, Ohio
Originally Posted By RV2
I like the M&H, I might do those with the 4" steel wheels on my Valiant


When I was googling, I saw a couple guys mention that the M&H tires drove really nice on the street.

My 26" M/T Sportsmans are awful, they are like a motorcycle tire and try to follow every little crack in the road.


1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual
Re: Skinny front radials, part 2 [Re: ProSport] #1952196
11/16/15 09:46 AM
11/16/15 09:46 AM
Joined: Mar 2003
Posts: 1,629
pa
572charger Offline
top fuel
572charger  Offline
top fuel

Joined: Mar 2003
Posts: 1,629
pa
did u ck a 205 75 15 radial tire thats what ive been using for many years i get them at pep boys for 70 bucks each !!!


606 hemi pump gas best 9.60 at 142mph on motor
05 hemi daytona 1500 go-mango 4wd quadcab
2007 hotrod mag pump gas drags runner up, roadkill nights dodge big tire winner 2018 2019 back to back
Re: Skinny front radials, part 2 [Re: ProSport] #1952200
11/16/15 09:56 AM
11/16/15 09:56 AM
Joined: Jan 2003
Posts: 17,918
Akron, Ohio
ProSport Offline OP
I Live Here
ProSport  Offline OP
I Live Here

Joined: Jan 2003
Posts: 17,918
Akron, Ohio
That's the size I bought and mounted, they were ginormous on a Duster, wouldn't even fit on the car, they hit fenders when turning. They were Cooper brand. They were listed as 26.98 tall and that's what they measured.


1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual
Re: Skinny front radials, part 2 [Re: ProSport] #1952227
11/16/15 11:21 AM
11/16/15 11:21 AM
Joined: Jan 2003
Posts: 17,918
Akron, Ohio
ProSport Offline OP
I Live Here
ProSport  Offline OP
I Live Here

Joined: Jan 2003
Posts: 17,918
Akron, Ohio
The 205/70/15 is 26.28" tall so it might fit better, I just don't think the 8.11" section width will look good on a 4" rim. I do not race this car but I like the looks of skinny front tire.


http://m.summitracing.com/parts/coo-34012


1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual
Re: Skinny front radials, part 2 [Re: ProSport] #1952229
11/16/15 11:24 AM
11/16/15 11:24 AM
Joined: Sep 2003
Posts: 19,405
north of coder
moparx Offline
"Butt Crack Bob"
moparx  Offline
"Butt Crack Bob"

Joined: Sep 2003
Posts: 19,405
north of coder
how about a 195 75 tire ? i can't help with the measurements though. sorry.
beer

Re: Skinny front radials, part 2 [Re: moparx] #1952240
11/16/15 11:45 AM
11/16/15 11:45 AM
Joined: Jan 2003
Posts: 17,918
Akron, Ohio
ProSport Offline OP
I Live Here
ProSport  Offline OP
I Live Here

Joined: Jan 2003
Posts: 17,918
Akron, Ohio
Originally Posted By moparx
how about a 195 75 tire ? i can't help with the measurements though. sorry.
beer


I would bet the 195 is a little too tall to fit a Duster but I wouldn't know for sure til I measured one mounted. Plus they are $146 and up so I may as well get one of the 3 I mentioned in the first post of this thread. It's worth looking into though, thanks.

Screenshot_2015-11-16-08-40-50-1.png

1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual
Re: Skinny front radials, part 2 [Re: ProSport] #1952449
11/16/15 06:43 PM
11/16/15 06:43 PM
Joined: Nov 2003
Posts: 1,839
NW Indiana
F
fbs63 Offline
top fuel
fbs63  Offline
top fuel
F

Joined: Nov 2003
Posts: 1,839
NW Indiana
Bob,
The MT's measure 25 1/2" tall an the circumference is approximately 80 1/2" on the 4" rim. He has a 69 Barracuda and they look good. Hope this helps

Re: Skinny front radials, part 2 [Re: ProSport] #1952471
11/16/15 07:08 PM
11/16/15 07:08 PM
Joined: Jan 2003
Posts: 2,296
NE Ohio
DoubleD Offline
top fuel
DoubleD  Offline
top fuel

Joined: Jan 2003
Posts: 2,296
NE Ohio
it's a street car - why run a skinny up front? go to a wider rim and put some wider tires up front - it will handle much better and be a bunch safer stopping

Last edited by DoubleD; 11/16/15 07:08 PM.
Re: Skinny front radials, part 2 [Re: fbs63] #1952481
11/16/15 07:34 PM
11/16/15 07:34 PM
Joined: Jan 2003
Posts: 17,918
Akron, Ohio
ProSport Offline OP
I Live Here
ProSport  Offline OP
I Live Here

Joined: Jan 2003
Posts: 17,918
Akron, Ohio
Originally Posted By fbs63
Bob,
The MT's measure 25 1/2" tall an the circumference is approximately 80 1/2" on the 4" rim. He has a 69 Barracuda and they look good. Hope this helps


Thanks! I'm glad to hear they're not shorter than my sportsmans, they're actually a tad taller.


1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual
Re: Skinny front radials, part 2 [Re: DoubleD] #1952484
11/16/15 07:38 PM
11/16/15 07:38 PM
Joined: Jan 2003
Posts: 17,918
Akron, Ohio
ProSport Offline OP
I Live Here
ProSport  Offline OP
I Live Here

Joined: Jan 2003
Posts: 17,918
Akron, Ohio
Originally Posted By DoubleD
it's a street car - why run a skinny up front? go to a wider rim and put some wider tires up front - it will handle much better and be a bunch safer stopping


Dave it's just my preference for looks. My next build is gonna be a pro-touring car with 4 fat tires and a 5 speed.


1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual
Re: Skinny front radials, part 2 [Re: ProSport] #1952793
11/17/15 04:03 AM
11/17/15 04:03 AM
Joined: Jan 2003
Posts: 27,421
Balt. Md
3
383man Offline
Too Many Posts
383man  Offline
Too Many Posts
3

Joined: Jan 2003
Posts: 27,421
Balt. Md
Dont know if this will help Bob but as you said many 15" tires will rub on turns on the front of an A-body. So we actually have 205/70-14's up front on my sons Dart and we have ran them on it since 1997 when I put it on the road. They work fine with the 15's we run in the back as it drives and handles great. Ron


Re: Skinny front radials, part 2 [Re: ProSport] #1952796
11/17/15 04:05 AM
11/17/15 04:05 AM
Joined: Jan 2003
Posts: 27,421
Balt. Md
3
383man Offline
Too Many Posts
383man  Offline
Too Many Posts
3

Joined: Jan 2003
Posts: 27,421
Balt. Md
Here is a pic from the front also. Good luck on which ever tires you go with. Ron


Re: Skinny front radials, part 2 [Re: ProSport] #1952815
11/17/15 08:50 AM
11/17/15 08:50 AM
Joined: Jan 2003
Posts: 17,918
Akron, Ohio
ProSport Offline OP
I Live Here
ProSport  Offline OP
I Live Here

Joined: Jan 2003
Posts: 17,918
Akron, Ohio
Ron, how wide is your front rim? Mine is only 4". Those tires do look good.


1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual
Page 1 of 2 1 2






Powered by UBB.threads™ PHP Forum Software 7.7.1