I am in the process of putting together an AAR Cuda build for SuperCars. Any recomendations on mufflers would be appreciated


Link- http://www.supercarraces.com/phpBB3/viewtopic.php?f=5&t=1434&start=0

Dynomax 17676

Thanks Tom. Do you have any flo numbers on the Dynomax? I found these but have no idea on how good they flo.

http://www.summitracing.com/parts/mpe-14210

Hooker Aerochambers. Best sounding mufflers I have had.

That Cuda is gorgeous!

If that is a stock sounding class you may have to find something that's fairly quiet and still flows well.

They are a little on the loud side, especially when you get on it. But as far as performance, Dynomax UltraFlo's work great. I put them on my race car with a 3" TTI X-pipe and and the car actually picked up a little - at least .05, over open TTI 1 5/8" - 1 3/4" headers. Only down side was that I had to find 60+ lbs to take out of the car to compensate for the exhaust system weight to get the car back to minimum race weight.

Beautiful collection and garage!

After a quick search, I see that UltraFlos don't have a same side inlet/outlet configuration, if that's a class requirement.

most of the F.A.S.T class race guys run the dynomax ultra flows with pypes brand tubing. I like the sound of the hooker maximum flows personally

These are a straight through design, basicly shaped like a U inside. The nice thing is these mufflers fit into a reproduction hanger. They are 4 inches shorter than the stock trans am muffler so you do have to make a little extension to the tip.

These mufflers won't hinder performance in this application I assure you.

Tom did you make the tail pipe an did you used 2.5 pipe. or dose any one make 2.5 aar exaust pipes.or are you useing 2.25 pipes
thanks

weldtechstainless

Thanks. Dynomax it is .

Thank you for this post and all the replies as I am also building a stock looking AAR with stroker and I was looking for the muffler that works.

Is Super Car racing a different version of FAST racing or a competitor. I always get worked up about this as there is nothing like it out here on the West coast, which surprises me as there are so many cars and people with money out here.

Wish they made those mufflers in a 3".

That Sucks... The tips were artwork

Ralphsrapid in the photo you posted of the full exhaust what brand was that. Whos mufflers were those they didn't look like a standard Dynamax they almost look like an Ultraflow from the rear.