I know lots of folks have had experiences with various places. Who has a really good CNC program for the small block Mopar Edelbrock Performer RPM head ? I'm working on a estimate for a 408 small block Mopar for a customer.

Thanks a bunch.

If you HAVE to go CNC, both Hughes and Modern's will make power regardless of who says what about flow #'s.
Or you can have guys like myself hand port for the application.
Either way, can't go wrong...
Brian

I used the Hughes Stage III heads on the 427 SB that I built for Tim's red Valiant. Articles in the tech archives.

https://board.moparts.org/ubbthreads/show...rt=all&vc=1

I have 3 sets of heads on my 430 build link above - really they were 3 different combos but you see :
1- stock set of heads
2- SDSS hand ported set
3- MCH CNC set.

With all 3 setups we had different intakes and we ran 2 different cams.