Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
Predator flow numbers #1626507
05/29/14 03:22 PM
05/29/14 03:22 PM
Joined: Feb 2004
Posts: 3,441
Mo.
S
supercomp Offline OP
master
supercomp  Offline OP
master
S

Joined: Feb 2004
Posts: 3,441
Mo.
Does anyone have flow numbers for predator heads? Thanks

Re: Predator flow numbers [Re: supercomp] #1626508
05/29/14 03:32 PM
05/29/14 03:32 PM
Joined: Jan 2007
Posts: 1,668
Mi,U.S.A.
M
mike s Offline
top fuel
mike s  Offline
top fuel
M

Joined: Jan 2007
Posts: 1,668
Mi,U.S.A.


Leave the gun.......take the Cannoli's....Mike
Re: Predator flow numbers [Re: mike s] #1626509
05/29/14 03:53 PM
05/29/14 03:53 PM
Joined: Jan 2003
Posts: 19,304
Las Vegas
Al_Alguire Offline
I Live Here
Al_Alguire  Offline
I Live Here

Joined: Jan 2003
Posts: 19,304
Las Vegas
Mine went 520cfm at 1". They are wedge heads fwiw.


"I am not ashamed to confess I am ignorant of what I do not know."

"It's never wrong to do the right thing"
Re: Predator flow numbers [Re: Al_Alguire] #1626510
05/29/14 04:49 PM
05/29/14 04:49 PM
Joined: Nov 2010
Posts: 1,397
Carson City, Nevada
Biginchmopar Offline
pro stock
Biginchmopar  Offline
pro stock

Joined: Nov 2010
Posts: 1,397
Carson City, Nevada
Quote:

Mine went 520cfm at 1". They are wedge heads fwiw.



Who did your port work?


Re: Predator flow numbers [Re: Al_Alguire] #1626511
05/29/14 05:10 PM
05/29/14 05:10 PM
Joined: Sep 2003
Posts: 1,049
San Jose Ca.
boatracer572 Offline
super stock
boatracer572  Offline
super stock

Joined: Sep 2003
Posts: 1,049
San Jose Ca.
Quote:

Mine went 520cfm at 1". They are wedge heads fwiw.



That's about average.... Mine flow 541cfm on the intake @ over one inch...375 cfm on the ex. They have been to a few places for port flow, velosity improvement..been told there is prob. Ten more cfm in them on the intake
Tony

Last edited by boatracer572; 05/29/14 05:14 PM.
Re: Predator flow numbers [Re: Biginchmopar] #1626512
05/29/14 05:32 PM
05/29/14 05:32 PM
Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Dragula Offline
I Live Here
Dragula  Offline
I Live Here

Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
I will tell you what, that would make for one hellofa street car engine at maybe 604 cubes on pump gas!

I think if I ever decide to go a different direction in the Cuda, I might need to try a set of those...


'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk
Re: Predator flow numbers [Re: boatracer572] #1626513
05/29/14 06:36 PM
05/29/14 06:36 PM
Joined: Nov 2010
Posts: 1,397
Carson City, Nevada
Biginchmopar Offline
pro stock
Biginchmopar  Offline
pro stock

Joined: Nov 2010
Posts: 1,397
Carson City, Nevada
Quote:

Quote:

Mine went 520cfm at 1". They are wedge heads fwiw.



That's about average.... Mine flow 541cfm on the intake @ over one inch...375 cfm on the ex. They have been to a few places for port flow, velosity improvement..been told there is prob. Ten more cfm in them on the intake
Tony




Tony do you race in Pro Gas?
I just finished an engine for Matt from Kriptonite Marine and I believe he runs Pro Gas.

Anyway who did the work on your heads?
Mine are CNC ported(460)from Indy and they say 510cfm but I want somebody to that can get me 530cfm to make sure the engine makes the power I need.

Re: Predator flow numbers [Re: Biginchmopar] #1626514
05/29/14 07:02 PM
05/29/14 07:02 PM
Joined: Jan 2003
Posts: 19,304
Las Vegas
Al_Alguire Offline
I Live Here
Al_Alguire  Offline
I Live Here

Joined: Jan 2003
Posts: 19,304
Las Vegas
FWIW mine will be headed east for a good look over and to see what can be done to improve what's there. Once we get it all mocked up in the new car and headers built etc. My stuff came from Steve.


"I am not ashamed to confess I am ignorant of what I do not know."

"It's never wrong to do the right thing"
Re: Predator flow numbers [Re: Al_Alguire] #1626515
05/29/14 07:36 PM
05/29/14 07:36 PM
Joined: Nov 2010
Posts: 1,397
Carson City, Nevada
Biginchmopar Offline
pro stock
Biginchmopar  Offline
pro stock

Joined: Nov 2010
Posts: 1,397
Carson City, Nevada
Man that's a long ways to go but he is the guy for these heads.

I'll send you a PM Al.

Thanks!


Re: Predator flow numbers [Re: Biginchmopar] #1626516
05/29/14 10:36 PM
05/29/14 10:36 PM
Joined: Jan 2007
Posts: 345
iowa
wesw Offline
enthusiast
wesw  Offline
enthusiast

Joined: Jan 2007
Posts: 345
iowa
the flow numbers on my heads are crap. they only flow 511.2 @ 1" on the intake and 338.1 on the exhaust side. they are the hemi bolt pattern head. I'm having mike at muscle motors looking to see if he can get some more out of them. wes


598 ci predator
Re: Predator flow numbers [Re: wesw] #1626517
05/30/14 12:03 PM
05/30/14 12:03 PM
Joined: Feb 2004
Posts: 3,441
Mo.
S
supercomp Offline OP
master
supercomp  Offline OP
master
S

Joined: Feb 2004
Posts: 3,441
Mo.
Would someone mind to pm me the flow numbers? I need them for my Dynomation 5 program. we're building a 572 or 604 and thinking about using predators. Already have our kb raised cam block clearanced for 4.750 stroke and has 55mm roller cam bearings. Who would you have port them?

Re: Predator flow numbers [Re: supercomp] #1626518
05/31/14 01:42 AM
05/31/14 01:42 AM
Joined: Sep 2003
Posts: 1,049
San Jose Ca.
boatracer572 Offline
super stock
boatracer572  Offline
super stock

Joined: Sep 2003
Posts: 1,049
San Jose Ca.
look at post number two. need to scroll down ,that list has pretty much most all head flow numbers listed,predator hemi and wedge included....

8160573-IMG_9605.jpg (335 downloads)
Re: Predator flow numbers [Re: boatracer572] #1626519
05/31/14 02:52 AM
05/31/14 02:52 AM
Joined: Nov 2004
Posts: 8,094
Sunnyvale, CA
Jeepmon Offline
master
Jeepmon  Offline
master

Joined: Nov 2004
Posts: 8,094
Sunnyvale, CA
Nice looking motor Tony...

Re: Predator flow numbers [Re: Jeepmon] #1626520
05/31/14 11:36 AM
05/31/14 11:36 AM
Joined: Apr 2005
Posts: 614
new jersey
G
gillman34 Offline
mopar
gillman34  Offline
mopar
G

Joined: Apr 2005
Posts: 614
new jersey
520-525 cfm is average for the 460cc CNC'd port,
There is more there if you go after them,as Tony's heads show.
These are REAL numbers,not some fluffed up sales pitch dream.
Steve
973-907-4474

Re: Predator flow numbers [Re: gillman34] #1626521
06/01/14 12:07 AM
06/01/14 12:07 AM
Joined: Nov 2010
Posts: 1,397
Carson City, Nevada
Biginchmopar Offline
pro stock
Biginchmopar  Offline
pro stock

Joined: Nov 2010
Posts: 1,397
Carson City, Nevada
Steve,
Why does Indy say 510cfm with the 460 CNC port?
I have messed with their stuff before(Indy) and they did inflate their flow numbers quit a bit from what we could get.
Just asking questions, not trying to bash anybody.
Did you sell the port design when Indy bought it from you?



Re: Predator flow numbers [Re: Dragula] #1626522
06/01/14 03:48 AM
06/01/14 03:48 AM
Joined: Jan 2003
Posts: 8,180
Detroit, MI
CokeBottleKid Offline
master
CokeBottleKid  Offline
master

Joined: Jan 2003
Posts: 8,180
Detroit, MI
Quote:

I will tell you what, that would make for one hellofa street car engine at maybe 604 cubes on pump gas!

I think if I ever decide to go a different direction in the Cuda, I might need to try a set of those...




Yes... a street car with 1" of valve lift... you get to start the engine then your springs are junk

Re: Predator flow numbers [Re: CokeBottleKid] #1626523
06/01/14 11:02 AM
06/01/14 11:02 AM
Joined: Feb 2004
Posts: 3,441
Mo.
S
supercomp Offline OP
master
supercomp  Offline OP
master
S

Joined: Feb 2004
Posts: 3,441
Mo.
I want to thank everyone who chimed in. I would appreciate it if someone would share their flow numbers from like .100 through .900. I need them for my Dynomation 5 program. You can pmthem to me. Thanks

Re: Predator flow numbers [Re: CokeBottleKid] #1626524
06/01/14 12:41 PM
06/01/14 12:41 PM
Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Dragula Offline
I Live Here
Dragula  Offline
I Live Here

Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Quote:

Quote:

I will tell you what, that would make for one hellofa street car engine at maybe 604 cubes on pump gas!

I think if I ever decide to go a different direction in the Cuda, I might need to try a set of those...




Yes... a street car with 1" of valve lift... you get to start the engine then your springs are junk




I guess you haven't been watching any of the Drag Week Mopar entries....Guess what won last years NA class....I am sure there are cam manufacturers that can make somthing a little more "street" friendly these days...And its my understanding these are some of the most stable valve trains at high lift available to us Mopar folks..Other than the cost of custom headers and the initial price of the heads, they certainly hold their own with the best flowing Mopar offerings out there.


'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk
Re: Predator flow numbers [Re: CokeBottleKid] #1626525
06/01/14 01:01 PM
06/01/14 01:01 PM
Joined: Mar 2006
Posts: 9,791
MI, usa
dvw Offline
master
dvw  Offline
master

Joined: Mar 2006
Posts: 9,791
MI, usa
Quote:

Quote:

I will tell you what, that would make for one hellofa street car engine at maybe 604 cubes on pump gas!

I think if I ever decide to go a different direction in the Cuda, I might need to try a set of those...




Yes... a street car with 1" of valve lift... you get to start the engine then your springs are junk




For what it's worth a friend of mine runs a big Chevy with over 1" in S/G. Pak springs have lasted over 2 seasons.
Doug

Re: Predator flow numbers [Re: dvw] #1626526
06/01/14 08:56 PM
06/01/14 08:56 PM
Joined: Apr 2004
Posts: 1,981
SE Michigan
TS3303 Offline
top fuel
TS3303  Offline
top fuel

Joined: Apr 2004
Posts: 1,981
SE Michigan
This is MCH lowest flowing CNC program as I didn't need the flow of his max port. They have a program that takes the intake port out to the o-ring groove which I believe flows around 540.

8162180-MCHPredator.jpg (342 downloads)
Page 1 of 2 1 2






Powered by UBB.threads™ PHP Forum Software 7.7.1