Re: Soooooo close to the 9's!!!!!
[Re: 6bblFLASH]
#1490197
08/28/13 06:59 PM
08/28/13 06:59 PM
|
Joined: Jan 2005
Posts: 3,635 Oakland, MI
dizuster
OP
master
|
OP
master
Joined: Jan 2005
Posts: 3,635
Oakland, MI
|
It is pretty amazing that you can just dial this thing up and down. I made a pass on 10psi right before the 10.08 pass. It went 11.22@121mph, smooth as silk. Crazy that the same car can run a full second faster with a few key strokes on the laptop. I would love to try leaving in 2nd, but the trans brake only works in 1st gear.
|
|
|
Re: Soooooo close to the 9's!!!!!
[Re: dizuster]
#1490198
08/28/13 09:16 PM
08/28/13 09:16 PM
|
Joined: Oct 2009
Posts: 1,267 North, Alabama
D-50
pro stock
|
pro stock
Joined: Oct 2009
Posts: 1,267
North, Alabama
|
Dizuster, What were your short times? We only run 1/8 mile down here in the south and I cannot relate to the 1/4 mile times. I have a 360/380 hp crate motor I would like to experiment with the turbo deal. THANKS.....
1.33 60 ft,6.21 at 110.59 in the 1/8, pump gas small block,2950lbs,drag radials,mufflers and driven to track ...
|
|
|
Re: Soooooo close to the 9's!!!!!
[Re: dizuster]
#1490204
08/28/13 10:52 PM
08/28/13 10:52 PM
|
Joined: Oct 2009
Posts: 1,267 North, Alabama
D-50
pro stock
|
pro stock
Joined: Oct 2009
Posts: 1,267
North, Alabama
|
Thanks, if you could get your 60 ft. better you would run nines easy. I know turbo cars run better on the top end. You should look into getting it a little lighter it would really pick up.I know that is easier said than done.Thanks..
1.33 60 ft,6.21 at 110.59 in the 1/8, pump gas small block,2950lbs,drag radials,mufflers and driven to track ...
|
|
|
Re: Soooooo close to the 9's!!!!!
[Re: WO23Coronet]
#1490206
08/29/13 12:38 AM
08/29/13 12:38 AM
|
Joined: Feb 2011
Posts: 4,302 Nebraska
72Swinger
master
|
master
Joined: Feb 2011
Posts: 4,302
Nebraska
|
I thought Ford had a 3.33 gear they used in Dana 60's in half ton Vans at some point to.
Mopar to the bone!!!
|
|
|
|
|