I found out the bearings still weren't down far enough got the passenger side done after work and just to see if it helped any I set the car back down and tried to move it still nothing. Keep in mind I didn't press the bearing down on the drivers side yet. Would the car move with only one axle touching the inner splines?

Not very well.. If the surefrip is good it will try to move but it'll be hard on the clutches & it won't move much.....

Got the axle bearing on the driver side all the way down, popped the axle back in and IT WORKS!!!!!! The axles were not catching the inner splines like many of you guys had said. Had to check and make sure both tires were spinning correctly! The 3:91s lit the roller tires right up (235/75 All terrains) and thats with the lean burn acting like well... lean burn. Time to move onto the engine and trans now! Thanks Moparts!