I'm the proud owner of a 1990 Dodge D-150, original paint (most of it anyway), V-6 5 speed. It was a farm truck in N.C. and I picked it up about 4 years ago for around a $1,000.00 and love it!!! Have had many offers to sell but not interested. I know there's not a lot of love for this style but if you have one... post a picture and some info....

Here's mine...








New Rear window graphic...

No pics, but as I've said before, yours is nearly a clone of my 1990 that I bought spankin' brand new October of 1989, also a V6 5-speed. Mine had a cloth seat, and that same horrible tape stripe. Funny, my passenger door got damaged...

Anyway, best Dodge I ever bought (rather leased)! Enough power for my uses (home renovations), honest 24mpg in daily driving, and just plain nice truck! I should have never turned it in at the end of the lease.

No pics of the truck, here is the house it helped renovate! It was boarded up and abandoned when I bought it.

1988 W-100 435/241/3.21
1992 W-250 4500/241/4.10
1993 W250 diesel/518/205/3.54

Uhm, well, if I hafta.. 83 D150, 86 W150, 87 W250, 93 W250. The Ramcharger isn't mine, but then I do have more trucks not in the picture either.
Mike

Here's mine...

my 85 stepside daily driver.

91-318/727/8.25-2.76 gear/235/75/15

60710 lunati VooDoo roller cam/comp 901-16 springs,LD4B/q-jet.headers/duel glass packs.

gets 19+ MPG at 55 MPH.

I added the steering box brace and sway bar, been lowerd tubbed then back to stock with the chassis.

my 3rd engine,4th trans,2nd rear axle since 05' when I got it.I am 3rd owner local Fl truck. has rust issuse along front top drip rail,floors..ect...

I just love to drive it.

it is the only stepside running around my town.

here is my weekend cruzer.

88-440/727/8.75-3.91sg running 3.23 at the moment. 15 MPG keeping under 2000 RPM.

stock 77 440/727,RPM intake/q-jet,center dump manifolds/duels

flip flop with tubbs tucking 12" rims with 29x15x15 M/Ts in the fenders

88 rust free kansas truck built on 85 rolling chassis from scratch, junk 3 other trucks building this one.

my first body work and paint job. did it all in the backyard in the dirt. i think it turn out well.

fun as !@#$%^ to drive this one.

only 440 truck lowered and tubbed around my town.

My '90 W-150. It's a little rougher these days though. The bed is shot, and I've just about given up hope of finding a replacement.

Square bodies rule! I'd love to build a little half ton short bed, lowered like that red one!

Here is mine, 92 W350 CTD. It's mostly retired, just sits in the garage with my cars now. Planning to take it to it's first truck show this summer.

here's my $300 '88 V6 5 speed curently getting a warmed over 318 auto transplant(as soon as I get the ambition to get back to work on it)

My son's 88, one prior old guy owner. Just a 318 auto but we're swapping in a 98 360 magnum and NV4500 as soon as he finishes rebearing the NV4500. It's got 35 inch tires on it now.

Sheldon

This is his 88 Ramcharger, really. 60 and 70, longer springs front and back, NP205 TC, beefy driveshafts, my old 400 is going into this one this year.

Sheldon

My 81 when it was one week old.

Sheldon

?

https://board.moparts.org/ubbthreads/show...e=0#Post2932530

Ryan

Still just holding down my lawn ...

Russ took the pic, I stole it!

But probably my favorite square Dodge pic!

My square truck