Post 'em if you gottem! Interested to see how A bodies sit with Cal Tracs mono's or stock leafs and small tires (small meaning like a 275/60 DR, or a 28 X 10-ish). I see Calvert sells their split mono's w/ a 1" drop. I don't like the SS spring look with the rear raised, so looking at the Calvert setup. For budgetary and baseline reasons, probably stick with the factory leafs for now.

my junk.

Nice, thanks. What size tires, and which leafs? Mine is not going to be mini-tubbed.

it's mini tubed. the tire's are 28x13.5 m/t et streets.has one under mono's.

275/60/15 hoosier drag radial under it in this pic. I have offset leafspring hangers with stock wheel wells. I got the +1 in ride height spring but ended up using 2 inch lowering blocks.

zero

+1

What backspacing are you using?

Which one?

This is my '69 Dart with the Mono-Leaf springs, 1" lower, and 26"x9" Hoosier slicks. The wheels are 15"x7" with 3.5" backspacing.

Chris

Another angle more toward the front.

Chris

275 hoosier radials smallblock power!

mine 1" lower

This is -1" cal-trac mono-leafs with offset mopar hangers..trimmed wheel lip and non modified wheel tubs. 275/60 MT'S

Cal-Tracs with mono-leafs (-1"). Non-tubbed with 3/4" offset hangers. Hoosier 28 x 11.5 QTP's. I had add a small spacer to the front leaf spring mounts to center the axle in the wheel well. Also had to roll the top of the wheel lip for clearance.

Very nice car! What motor combo and what does it run?

Thanks. It's a 12:1 340 with W2's, small Hughes solid, 4spd and 4:88's. I haven't run it yet with the W2's. With the bowl worked J heads I had on it it went 11.70's at 117.7 (on worn out M&H's).

-1 leafs moved in 28x10.5