ANY DIFFERENCE IN 360 CAST CRANKS - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech ANY DIFFERENCE IN 360 CAST CRANKS

Print Thread

ANY DIFFERENCE IN 360 CAST CRANKS #1346697 12/06/12 12:53 AM 12/06/12 12:53 AM
Joined: Oct 2008 Posts: 1,176 East Coast A A/MP OP super stock
A/MP OP super stock A Joined: Oct 2008 Posts: 1,176 East Coast	Can I switch from a 360 LA cast crank to a'91 Magnum crank. I will have the Magnum crank balanced internally so there will be no dampner problems.

Re: ANY DIFFERENCE IN 360 CAST CRANKS [Re: A/MP] #1346698 12/06/12 01:37 AM 12/06/12 01:37 AM
Joined: Jul 2010 Posts: 2,091 Delray beach, Florida P Performance Only top fuel
Performance Only top fuel P Joined: Jul 2010 Posts: 2,091 Delray beach, Florida	the crank swap shouldn't be a problem. Keep in mind that to internally balance you'll have to add weight to the crank (mallory/Tungsten) and it can get expensive. machine shop owner and engine builder

Re: ANY DIFFERENCE IN 360 CAST CRANKS [Re: Performance Only] #1346699 12/06/12 12:25 PM 12/06/12 12:25 PM
Joined: Apr 2009 Posts: 3,429 Toronto M mshred master
mshred master M Joined: Apr 2009 Posts: 3,429 Toronto	My cast crank cost me $250 in mallory ALONE on top of the $300 balance job to internally balance on my LA crank Also, 360's in 91 were still LA motors, wasn't until 92 or 93 they went magnum.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1