|
Re: 71challenger 440+6 shaker clone FAST/my HS grad present
[Re: wally426ci]
#1341461
01/09/13 03:01 PM
01/09/13 03:01 PM
|
Joined: May 2012
Posts: 223 Oreland Pa
clonedshaker+6
OP
enthusiast
|
OP
enthusiast
Joined: May 2012
Posts: 223
Oreland Pa
|
thanks for posting the pic your car looks good and it keeps me motivated to keep working hard on my car ,bryan
71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present) 03 mustang Mach 1 (daily driver)
11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
|
|
|
Re: 71challenger 440+6 shaker clone FAST/my HS grad present
[Re: clonedshaker+6]
#1341462
01/13/13 09:48 PM
01/13/13 09:48 PM
|
Joined: May 2012
Posts: 223 Oreland Pa
clonedshaker+6
OP
enthusiast
|
OP
enthusiast
Joined: May 2012
Posts: 223
Oreland Pa
|
welded in the gas tank straps and put the pass. door and trunk lid on and started drilling the spot welds on the quarter this weekend, quarter should be off this week then i can start putting it back together with the new metal
71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present) 03 mustang Mach 1 (daily driver)
11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
|
|
|
Re: 71challenger 440+6 shaker clone FAST/my HS grad present
[Re: HemiChallenger]
#1341467
01/17/13 11:12 PM
01/17/13 11:12 PM
|
Joined: May 2012
Posts: 223 Oreland Pa
clonedshaker+6
OP
enthusiast
|
OP
enthusiast
Joined: May 2012
Posts: 223
Oreland Pa
|
the power windows are hear to stay. its the only power option im putting back in. manual brakes, steering, and trans
Last edited by clonedshaker+6; 01/18/13 01:20 PM.
71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present) 03 mustang Mach 1 (daily driver)
11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
|
|
|
Re: 71challenger 440+6 shaker clone FAST/my HS grad present
[Re: clonedshaker+6]
#1341468
02/09/13 08:31 PM
02/09/13 08:31 PM
|
Joined: May 2012
Posts: 223 Oreland Pa
clonedshaker+6
OP
enthusiast
|
OP
enthusiast
Joined: May 2012
Posts: 223
Oreland Pa
|
been a while since i posted, spent alot of time fixing the wheel houses and the inner structure so the quarter could be fitted, everything is primed up and ready for the quarter
71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present) 03 mustang Mach 1 (daily driver)
11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
|
|
|
Re: 71challenger 440+6 shaker clone FAST/my HS grad present
[Re: imfixinmopars426]
#1341473
02/15/13 09:34 PM
02/15/13 09:34 PM
|
Joined: May 2012
Posts: 223 Oreland Pa
clonedshaker+6
OP
enthusiast
|
OP
enthusiast
Joined: May 2012
Posts: 223
Oreland Pa
|
thanks! i can tell im ahead for my age just by seeing that my dad and most people to begin with wouldnt take on this kinda of project. people tell me to just buy a done car but signing a check is easier then picking up some wrenchs, a welder and spending countless hours on restoring a peice of history. building the car is also a learning expereince for me and it allows me to build what i want and when the car is done i can point to it saying "I built that" which is something not many people can say. chances are this is not going to be my last restoration, theres alot of cars i want but project cars are getting more and more rare everyday and yes im focusing on my car over the girls, after all my car and dirtbike cant wake up and tell me they dont love me anymore
Last edited by clonedshaker+6; 02/15/13 09:44 PM.
71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present) 03 mustang Mach 1 (daily driver)
11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
|
|
|
Re: 71challenger 440+6 shaker clone FAST/my HS grad present
[Re: clonedshaker+6]
#1341475
02/19/13 08:17 PM
02/19/13 08:17 PM
|
Joined: May 2012
Posts: 223 Oreland Pa
clonedshaker+6
OP
enthusiast
|
OP
enthusiast
Joined: May 2012
Posts: 223
Oreland Pa
|
trunk floor, finished welding and grinding
71 challenger 440 sixpack shaker *CLONE* (71challenger 440+6 shaker clone FAST/my HS grad present) 03 mustang Mach 1 (daily driver)
11.35 @ 121.5 4 SPEED on F60-15s w/ 6/32 tread
|
|
|
Re: 71challenger 440+6 shaker clone FAST/my HS grad present
[Re: Quicksilver440]
#1341477
02/22/13 09:42 AM
02/22/13 09:42 AM
|
Joined: Jun 2010
Posts: 1,144 wellington ohio
68-scatpack-rt
In thin ice
|
In thin ice
Joined: Jun 2010
Posts: 1,144
wellington ohio
|
Inspiring! Great work you are doing there. There is no feeling in the world like the feeling of accomplishment you get from what you are doing. Please keep posting lots of pics.
unions....the folks who brought you the weekend!
|
|
|
|
|
|