NAY fit was terrible,had to rebend most lines weren't even close to originals in bends and length. wouldn't seal up

Wanted to thank everybody for their input. I did end up choosing Inline Tube, mainly with the reason being because they were the only company that I could find who made a brake and fuel line kit for an '89 Shelby Dakota. All of the lines are installed now and were pretty darn close to being 100% correct. I still have to finish installing the rubber brake hoses and master cylinder before putting fluid in (hopefully everything seals up good *fingers crossed*).

I have done about 3 cars with Fine Lines fuel and brake lines with no problems.

I have had real good luck with their brake lines and horrible luck with their fuel lines..I had two sets made for a 72 400 motor with a thermoquad and neither set fits and they are both totally different..Their building is only a mile from my home..

Final Update:

Brake system is all hooked up and is in working order with no leaks Fuel lines were slightly off, but nothing that a little muscle couldn't fix.

My final thought:

Based on my experience, I would recommend Inline Tube to somebody seeking new brake/fuel lines.