Mancini Roller Rockers
#1123159
11/28/11 03:34 AM
11/28/11 03:34 AM
|
Joined: Jan 2003
Posts: 6,139 Melbourne , Australia
LA360
OP
master
|
OP
master
Joined: Jan 2003
Posts: 6,139
Melbourne , Australia
|
I was looking around their site for a set of roller rockers for one of my small blocks. I came across their own brand of Roller Rockers, but no pictures. Has anyone used them? they are obviously someone else's rocker arms re-packaged. They were a little cheaper than the Hughes roller rockers, just wondering if anyone had a set? Thanks in Advance
Alan Jones
|
|
|
Re: Mancini Roller Rockers
[Re: shoebox]
#1123162
11/29/11 12:26 AM
11/29/11 12:26 AM
|
Joined: Mar 2008
Posts: 553 Kentucky
clovis
mopar
|
mopar
Joined: Mar 2008
Posts: 553
Kentucky
|
This is a big block set. These are produced by Harland Sharp but exclusive to Mancini. I did have to extend the oil hole just a tad to connect it to the center grove (just a touch with the dremel). These have worked out very good for me as the shape on the back side of the rocker allows valve cover clearance with my Stage VI heads.
'75 Plymouth Duster Phase I 451 906/590/2-660 10.75/126 Phase II 451 Stage VI/590/1050 9.82/135 Phase III 383 906/Victor-Pump gas 11.30/119
"For by grace you have been saved through faith. And this is not your own doing; it is the gift of God,"
|
|
|
Re: Mancini Roller Rockers
[Re: LA360]
#1123165
11/29/11 10:03 AM
11/29/11 10:03 AM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
I love them! We used a set on our Engine Masters 406 BB--No mods--they are great! Big adjusters just like normal Harlands and no oil pressure bleeding rollers--clear everything everywhere--Mancini is the only place I know of to get them--you have to figure there is over $100 worth of quality adjusters here--good deal IMO
|
|
|
Re: Mancini Roller Rockers
[Re: Irun5snd8th]
#1123167
11/30/11 12:03 AM
11/30/11 12:03 AM
|
Joined: Mar 2008
Posts: 553 Kentucky
clovis
mopar
|
mopar
Joined: Mar 2008
Posts: 553
Kentucky
|
If I remember correctly it is only the rockers and adjusters that are HS, the shafts and hold downs are from somewhere else.
'75 Plymouth Duster Phase I 451 906/590/2-660 10.75/126 Phase II 451 Stage VI/590/1050 9.82/135 Phase III 383 906/Victor-Pump gas 11.30/119
"For by grace you have been saved through faith. And this is not your own doing; it is the gift of God,"
|
|
|
Re: Mancini Roller Rockers
[Re: clovis]
#1123168
12/13/11 06:06 PM
12/13/11 06:06 PM
|
Joined: Jan 2003
Posts: 6,139 Melbourne , Australia
LA360
OP
master
|
OP
master
Joined: Jan 2003
Posts: 6,139
Melbourne , Australia
|
I ordered a set and they sent me Crane rockers. The part number on the web site matches the part number on the Crane box. To add insult to injury they added a catalog with the rockers I thought I was getting on the front page. If I knew they were going to send me Crane's, I would have bought the Hughes rockers instead like I was originally intending.
Alan Jones
|
|
|
Re: Mancini Roller Rockers
[Re: Get-X]
#1123171
12/13/11 07:57 PM
12/13/11 07:57 PM
|
Joined: Jan 2003
Posts: 6,139 Melbourne , Australia
LA360
OP
master
|
OP
master
Joined: Jan 2003
Posts: 6,139
Melbourne , Australia
|
I have contacted them but haven't heard back from them. This is the second time they have sent me the wrong parts, and sending parts back when you are on the other side of the world is an expensive exercise. I ordered these rockers with a BB oil pump for my friend's engine. The postage was $125
Alan Jones
|
|
|
Re: Mancini Roller Rockers
[Re: Moparmal]
#1123174
12/14/11 07:40 AM
12/14/11 07:40 AM
|
Joined: Jan 2003
Posts: 6,139 Melbourne , Australia
LA360
OP
master
|
OP
master
Joined: Jan 2003
Posts: 6,139
Melbourne , Australia
|
Thanks for the advice Mal, but I am not really fussed. I am happy to run with them, I more so just wanted to get the information out there so it doesn't happen to someone else.
Alan Jones
|
|
|
Re: Mancini Roller Rockers
[Re: LA360]
#1123175
12/14/11 10:22 AM
12/14/11 10:22 AM
|
Joined: Mar 2007
Posts: 12,008 Finally a HUSKER again
Moparnut426
I Live Here
|
I Live Here
Joined: Mar 2007
Posts: 12,008
Finally a HUSKER again
|
Quote:
Thanks for the advice Mal, but I am not really fussed. I am happy to run with them, I more so just wanted to get the information out there so it doesn't happen to someone else.
|
|
|
|
|