Previous Thread
Next Thread
Print Thread
Broke a stock axle @ the track; happen to anybody else? #1066291
08/31/11 12:02 AM
08/31/11 12:02 AM
Joined: Feb 2007
Posts: 615
High Plains of South Dakota
O
olwhite64 Offline OP
mopar
olwhite64  Offline OP
mopar
O

Joined: Feb 2007
Posts: 615
High Plains of South Dakota
I suppose it should seem obvious to me that it would eventually happen, but I thought I would have to be running a lot faster than 12.60's. I have never weighed the car, but I would guess it would probably weigh all of 3800 lbs. No transbrake, 3500 stall, 29.5 X 10.5 slicks, and I know I have less than 70 passes total on the car. It does have a spool in the 8 3/4 but I've never run it on the street; it been on the track only since I put it together. The left axle, (the one that didn't break) was twisted in the splines as well. Assuming the car led a pedestrian lifestyle before I got it, (that's what I'm told) I am just surprised that they had such a short lifespan. I have lots of friend that have been running stock axles (in faster cars) for years with no problems. Fwiw they twisted just out side of the spool.

6803111-DSC_0188wtmk.JPG (191 downloads)
Re: Broke a stock axle @ the track; happen to anybody else? [Re: olwhite64] #1066292
08/31/11 12:07 AM
08/31/11 12:07 AM
Joined: Jan 2003
Posts: 3,103
Phila Pa
S
scatpacktom Offline
master
scatpacktom  Offline
master
S

Joined: Jan 2003
Posts: 3,103
Phila Pa
Stock axles and a spool are a no no and now you know why.

Re: Broke a stock axle @ the track; happen to anybody else? [Re: scatpacktom] #1066293
08/31/11 12:11 AM
08/31/11 12:11 AM
Joined: Feb 2007
Posts: 615
High Plains of South Dakota
O
olwhite64 Offline OP
mopar
olwhite64  Offline OP
mopar
O

Joined: Feb 2007
Posts: 615
High Plains of South Dakota
They would not have broke with a suregrip? I am seriously asking....

Re: Broke a stock axle @ the track; happen to anybody else? [Re: olwhite64] #1066294
08/31/11 12:30 AM
08/31/11 12:30 AM
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY Offline
Master
MR_P_BODY  Offline
Master

Joined: Jun 2003
Posts: 52,972
Romeo MI
Quote:

They would not have broke with a suregrip? I am seriously asking....




They ALL twist outside of the spool(the spool holds
the splines straight).... I broke a stock axle 35 years
ago... I always buy aftermarket for any car with any
type of slicks... my currant axles have about 1 whole
spline of twist and they've stayed there.... by the
way... paint a white line down the whole length of
the new axles when you put the new ones in.... you
will learn ALOT from that line

Re: Broke a stock axle @ the track; happen to anybody else? [Re: MR_P_BODY] #1066295
08/31/11 12:38 AM
08/31/11 12:38 AM
Joined: Feb 2007
Posts: 615
High Plains of South Dakota
O
olwhite64 Offline OP
mopar
olwhite64  Offline OP
mopar
O

Joined: Feb 2007
Posts: 615
High Plains of South Dakota
Thanks for the tip...I'm betting there is no such thing as a cheap Dana 60...

Re: Broke a stock axle @ the track; happen to anybody else? [Re: olwhite64] #1066296
08/31/11 01:40 AM
08/31/11 01:40 AM
Joined: Aug 2003
Posts: 43,097
Bend,OR USA
C
Cab_Burge Offline
I Win
Cab_Burge  Offline
I Win
C

Joined: Aug 2003
Posts: 43,097
Bend,OR USA
It sounds like the axles got swapped from one side to the other, usually the left axle breaks first I have broken two stock 8 3/4 axles with posi, none since I bought Strange race axles. I also switch to 35 splines with the new axles and spools I now run a Dana 60 with the same 35 spline race axles as I started with 6 years ago in the 8 3/4


Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
Re: Broke a stock axle @ the track; happen to anybody else? [Re: Cab_Burge] #1066297
08/31/11 01:49 AM
08/31/11 01:49 AM
Joined: Nov 2003
Posts: 4,027
Dearborn Hts, MI
Sledge_57 Offline
master
Sledge_57  Offline
master

Joined: Nov 2003
Posts: 4,027
Dearborn Hts, MI
Short lifespan? That was what, a 45 year old axle you were abusing?

Anyway I did the same thing with a locker, I went to Strange after mine broke...


Doug

1967 "Pedal Car" 500" low deck , TF 727, 4.30 Locker
Best to Date: 11.67 @ 114.9 1.64 60ft

"Kids in cars cause accidents. Accidents in cars cause kids..."
Re: Broke a stock axle @ the track; happen to anybody else? [Re: Sledge_57] #1066298
08/31/11 02:32 AM
08/31/11 02:32 AM
Joined: Jul 2004
Posts: 3,804
Arlington, Texas
B
bobby66 Offline
master
bobby66  Offline
master
B

Joined: Jul 2004
Posts: 3,804
Arlington, Texas
Broke an axle in my '66 Charger. 4150lbs. with me in it. Drag radials 4.30s with locker. Pretty exciting ride for a couple seconds.

Re: Broke a stock axle @ the track; happen to anybody else? [Re: Cab_Burge] #1066299
08/31/11 09:18 AM
08/31/11 09:18 AM
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
Mr.Yuck Offline
Not enough dumb comments...yet
Mr.Yuck  Offline
Not enough dumb comments...yet

Joined: Jan 2003
Posts: 24,562
Brookeville, Md
ouch 12.60? Now I know I need to swap mine out ASAP. I have a set from DrDiff sitting next to the car. FWIW I ran 12.0's with stock rear/axles for and entire year w/ no problems 1.65 60 foot in a 3850lb car. This one has had only a few runs and 1.60 60 foot.


[IMG]http://i66.tinypic.com/pui5j.jpg[/IMG]
Coming soon!!!!
Re: Broke a stock axle @ the track; happen to anybody else? [Re: Mr.Yuck] #1066300
08/31/11 09:34 AM
08/31/11 09:34 AM
Joined: Jan 2003
Posts: 74,942
U.S.S.A.
JohnRR Offline
I Win
JohnRR  Offline
I Win

Joined: Jan 2003
Posts: 74,942
U.S.S.A.
Quote:

ouch 12.60? Now I know I need to swap mine out ASAP. I have a set from DrDiff sitting next to the car. FWIW I ran 12.0's with stock rear/axles for and entire year w/ no problems 1.65 60 foot in a 3850lb car. This one has had only a few runs and 1.60 60 foot.




When is the last time you looked at the splines on either car?

Re: Broke a stock axle @ the track; happen to anybody else? [Re: olwhite64] #1066301
08/31/11 09:35 AM
08/31/11 09:35 AM
Joined: Jan 2003
Posts: 74,942
U.S.S.A.
JohnRR Offline
I Win
JohnRR  Offline
I Win

Joined: Jan 2003
Posts: 74,942
U.S.S.A.
Quote:

They would not have broke with a suregrip? I am seriously asking....




No , they would break with a suregrip also.

Re: Broke a stock axle @ the track; happen to anybody else? [Re: JohnRR] #1066302
08/31/11 09:46 AM
08/31/11 09:46 AM
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
Mr.Yuck Offline
Not enough dumb comments...yet
Mr.Yuck  Offline
Not enough dumb comments...yet

Joined: Jan 2003
Posts: 24,562
Brookeville, Md
Quote:

Quote:

ouch 12.60? Now I know I need to swap mine out ASAP. I have a set from DrDiff sitting next to the car. FWIW I ran 12.0's with stock rear/axles for and entire year w/ no problems 1.65 60 foot in a 3850lb car. This one has had only a few runs and 1.60 60 foot.




When is the last time you looked at the splines on either car?




never but I'll be looking at these soon as they will be swapped out before the next "outting" as I plan on making some 100% all out passes.

Re: Broke a stock axle @ the track; happen to anybody else? [Re: Mr.Yuck] #1066303
08/31/11 10:29 AM
08/31/11 10:29 AM
Joined: Jun 2010
Posts: 248
Ohio
aquamist60 Offline
enthusiast
aquamist60  Offline
enthusiast

Joined: Jun 2010
Posts: 248
Ohio
I checked mine when it was running low 13's on street tires & a 4.10 gear. Saw they were just starting to twist after 1 1/2 years racing it & street duty. It was an E-body 8 3/4 rear narrowed. Put aftermarket with a sure grip & finally a spool.
IIRC in the NHRA rule book it says aftermarket axles required with a spool.

Re: Broke a stock axle @ the track; happen to anybody else? [Re: aquamist60] #1066304
08/31/11 10:47 AM
08/31/11 10:47 AM
Joined: Jan 2004
Posts: 2,103
East Coast, NJ
F
fig426 Offline
top fuel
fig426  Offline
top fuel
F

Joined: Jan 2004
Posts: 2,103
East Coast, NJ
A friend of mine broke his in his 12.50 AAR.


Chris from New Jersey
Re: Broke a stock axle @ the track; happen to anybody else? [Re: fig426] #1066305
08/31/11 10:56 AM
08/31/11 10:56 AM
Joined: Aug 2004
Posts: 2,128
sweden
S
sshemi Offline
top fuel
sshemi  Offline
top fuel
S

Joined: Aug 2004
Posts: 2,128
sweden
ofcourse they give up faster with a spool.

Re: Broke a stock axle @ the track; happen to anybody else? [Re: olwhite64] #1066306
08/31/11 12:20 PM
08/31/11 12:20 PM
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY Offline
Master
MR_P_BODY  Offline
Master

Joined: Jun 2003
Posts: 52,972
Romeo MI
Quote:

Thanks for the tip...I'm betting there is no such thing as a cheap Dana 60...




Go to the bone yard and see what you can find...
you dont want the HEAVY DUTY one.... the tubes are
THICK

Re: Broke a stock axle @ the track; happen to anybody else? [Re: olwhite64] #1066307
08/31/11 09:31 PM
08/31/11 09:31 PM
Joined: Jan 2003
Posts: 16,923
NC
440Jim Offline
I Live Here
440Jim  Offline
I Live Here

Joined: Jan 2003
Posts: 16,923
NC
I broke a stock axle on my 3700 lb 1973 Barracuda with 440, 3900 converter, 1.55 sixty foot, 8-3/4 rear, suregrip, slicks. I don't remember exactly, but maybe 150 passes. Aftermarket axles after that and no problems.

Re: Broke a stock axle @ the track; happen to anybody else? [Re: 440Jim] #1066308
08/31/11 09:42 PM
08/31/11 09:42 PM
Joined: Mar 2006
Posts: 9,813
MI, usa
dvw Offline
master
dvw  Offline
master

Joined: Mar 2006
Posts: 9,813
MI, usa
I ran resplined axles with a sure grip for over 15 years 11.60@3800lbs. They had 1 spline of twist when replaced. I also ran 12.50@3750lbs with a stick for about 100 passes with the same amount of twist. Both on slicks.
Doug







Powered by UBB.threads™ PHP Forum Software 7.7.1