Re: Eddy single 4 intake for 5.7 ??
[Re: HotRodDave]
#1057885
08/20/11 05:03 PM
08/20/11 05:03 PM
|
Joined: Jun 2003
Posts: 9,225 Charleston
sixpackgut
Drag Week Mod Champion
|
Drag Week Mod Champion
Joined: Jun 2003
Posts: 9,225
Charleston
|
the prices are ubsurd. from indy you can buy a mod man with the eddie carbs and linkage for $1100. almost the same price as the drag pack intake. it really annoys me because i want the drag pack intake but i wont spend 1k on it.
with the mod man, it has bosses to hide the coils also
Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram
performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs
|
|
|
Re: Eddy single 4 intake for 5.7 ??
[Re: HotRodDave]
#1057886
08/20/11 08:06 PM
08/20/11 08:06 PM
|
Joined: Jun 2005
Posts: 2,776 Ontario Canada
MattW
master
|
master
Joined: Jun 2005
Posts: 2,776
Ontario Canada
|
Quote:
So I was thinking about building a 65 cuda into a bit of a rat rod with a spare 5.7 siting in the shop and the only intakes I could find are XV $600 so I checked the mopar one and it is running $1000 the only eddy one I can find is the dual quad one and then I am over budget buying 2 carbs instead of one Is there an eddy or any knock offs who are not looking to pay for the entire production operation off of one manifold sale? I mean come on... there are 5 different single 4 manifolds for the LS1 under $400 I can get an eddy for $265 from summit and a complete conversion kit with computer for the price of an XV bare manifold!!!
So much for my dream of being the first with a t-quad on a 5.7... the bastards at "MOPAR SUCKS PERFORMANCE FROM THER ENGINES" are makeing sure of that!
Welcome to the world of LS. What would be nice is the drag pack intake shorter and in plastic for 400.00. Hello Mopar!!!!!!!
|
|
|
Re: Eddy single 4 intake for 5.7 ??
[Re: 1Fast340]
#1057888
08/20/11 08:35 PM
08/20/11 08:35 PM
|
Joined: Jun 2005
Posts: 2,776 Ontario Canada
MattW
master
|
master
Joined: Jun 2005
Posts: 2,776
Ontario Canada
|
Quote:
here we go again,stop whining and start buying and the prices will come down.
Already started. 2 sets of heads and looking for a short block.But when you spend 1000.00 dollars on an intake that is cast your They have good prices on bare 6.1 block that is a 1000.00 but for an intake I will go custom before spending that amount. If you think that if they sell 10000 intake the price will magically start to fall well then go ahead hold you breath. They came out with the apache cylinder head that may sell 10000 sets.The heads are fully assembled for below 1000.00 a set. The manifold doesn't add up IMO. Thanks for adding your opinion.
|
|
|
Re: Eddy single 4 intake for 5.7 ??
[Re: MattW]
#1057889
08/20/11 08:39 PM
08/20/11 08:39 PM
|
Joined: May 2005
Posts: 1,130 Dayton, Ohio
wldtm
super stock
|
super stock
Joined: May 2005
Posts: 1,130
Dayton, Ohio
|
MattW give up the details on the 6.1 block for 1000$. p# and what it inlcudes please!
justin
Interested in having you car wired? Drag car, street car, EFI swap?
PM for details
|
|
|
Re: Eddy single 4 intake for 5.7 ??
[Re: HotRodDave]
#1057892
08/20/11 08:45 PM
08/20/11 08:45 PM
|
Joined: Jun 2005
Posts: 2,776 Ontario Canada
MattW
master
|
master
Joined: Jun 2005
Posts: 2,776
Ontario Canada
|
Quote:
So I was thinking about building a 65 cuda into a bit of a rat rod with a spare 5.7 siting in the shop and the only intakes I could find are XV $600 so I checked the mopar one and it is running $1000 the only eddy one I can find is the dual quad one and then I am over budget buying 2 carbs instead of one Is there an eddy or any knock offs who are not looking to pay for the entire production operation off of one manifold sale? I mean come on... there are 5 different single 4 manifolds for the LS1 under $400 I can get an eddy for $265 from summit and a complete conversion kit with computer for the price of an XV bare manifold!!!
So much for my dream of being the first with a t-quad on a 5.7... the bastards at "MOPAR SUCKS PERFORMANCE FROM THER ENGINES" are makeing sure of that!
You could buy the Eddy and fab a plate to add the thermoboooog. Man I love those carbs. Had about 50 of them 20 years ago and tossed them in the garbage.
|
|
|
Re: Eddy single 4 intake for 5.7 ??
[Re: wldtm]
#1057895
08/20/11 08:59 PM
08/20/11 08:59 PM
|
Joined: Jun 2005
Posts: 2,776 Ontario Canada
MattW
master
|
master
Joined: Jun 2005
Posts: 2,776
Ontario Canada
|
Quote:
MattW give up the details on the 6.1 block for 1000$. p# and what it inlcudes please!
justin
Look at the hot deals section i gave the thread a bump.
|
|
|
Re: Eddy single 4 intake for 5.7 ??
[Re: STEFF]
#1057896
08/20/11 09:01 PM
08/20/11 09:01 PM
|
Joined: Jun 2005
Posts: 2,776 Ontario Canada
MattW
master
|
master
Joined: Jun 2005
Posts: 2,776
Ontario Canada
|
Quote:
Instead of complaining, there's market opportunity, make the investment and develop, manufacture & sell an affordable intake.
Love to but don't have the capital to invest.
|
|
|
Re: Eddy single 4 intake for 5.7 ??
[Re: 1Fast340]
#1057898
08/20/11 09:06 PM
08/20/11 09:06 PM
|
Joined: Jun 2005
Posts: 2,776 Ontario Canada
MattW
master
|
master
Joined: Jun 2005
Posts: 2,776
Ontario Canada
|
Quote:
the reason that prices will come down when people buy is pretty simple,if one company can get the stuff moving others will start tooling up thats where competition sets in. from what i read about the dragpack intake its worth the money,since it is capable of making power. the thing i have learnt from moparts is that everyone wants to go fast but most dont want to pay the price:(
I don't see that happening there no volume in sales for mopars. IMO the intake works because it is a tunnel ram with a single carb straight shot to the piston.
|
|
|
Re: Eddy single 4 intake for 5.7 ??
[Re: sixpackgut]
#1057899
08/20/11 09:11 PM
08/20/11 09:11 PM
|
Joined: Jun 2005
Posts: 2,776 Ontario Canada
MattW
master
|
master
Joined: Jun 2005
Posts: 2,776
Ontario Canada
|
Quote:
Quote:
here we go again,stop whining and start buying and the prices will come down.
Zippy said mopar only sells 12 337 intakes a year and that intake cost $225
This is why I don't understand the cost. The drag pack intake is not a marvel in engineering. It looks like the old Ramcharger intake and that intake looked like they used radiator hose to make it. LOL
|
|
|
Re: Eddy single 4 intake for 5.7 ??
[Re: STEFF]
#1057900
08/20/11 09:22 PM
08/20/11 09:22 PM
|
Joined: Jun 2003
Posts: 9,225 Charleston
sixpackgut
Drag Week Mod Champion
|
Drag Week Mod Champion
Joined: Jun 2003
Posts: 9,225
Charleston
|
Quote:
Instead of complaining, there's market opportunity, make the investment and develop, manufacture & sell an affordable intake.
my attempt
Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram
performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs
|
|
|
Re: Eddy single 4 intake for 5.7 ??
[Re: sixpackgut]
#1057901
08/20/11 09:28 PM
08/20/11 09:28 PM
|
Joined: Jun 2005
Posts: 2,776 Ontario Canada
MattW
master
|
master
Joined: Jun 2005
Posts: 2,776
Ontario Canada
|
Quote:
Quote:
Instead of complaining, there's market opportunity, make the investment and develop, manufacture & sell an affordable intake.
my attempt
LOL If the runners line up use a block of wood. Plus you get the thermo break.LOL
I will be flowing the Apache heads in the near future same flow bench as before. Matt
|
|
|
|
|