1 7/8 HEADERS IN BB DUSTER - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 1 7/8 HEADERS IN BB DUSTER

Print Thread

1 7/8 HEADERS IN BB DUSTER #1045935 08/02/11 05:03 PM 08/02/11 05:03 PM
Joined: Sep 2005 Posts: 2,442 LOWELL IN Q QWK_ENUF OP top fuel
QWK_ENUF OP top fuel Q Joined: Sep 2005 Posts: 2,442 LOWELL IN	looking for some coated 1 7/8 headers that fit a b motor in an a body in chassis, anybody make them... thanks WAXER

Re: 1 7/8 HEADERS IN BB DUSTER [Re: QWK_ENUF] #1045936 08/02/11 05:54 PM 08/02/11 05:54 PM
Joined: May 2004 Posts: 3,210 robin hood country deaks master
deaks master Joined: May 2004 Posts: 3,210 robin hood country	TTI ? 69 Dart GTS 440 mopar .590 cam, Edelbrock heads, 3200# best et 6.45, 106.78, 10.14, 132.88 mph, 1.47 60ft best 60ft 1.36

Re: 1 7/8 HEADERS IN BB DUSTER [Re: QWK_ENUF] #1045937 08/02/11 06:05 PM 08/02/11 06:05 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	I prefer to buy (if I'm buying them) and check to make sure they fit and correct them if needed then I take them to QC Coatings(happens to be local to me) and have them plated... that way I know they will fit which seems to be somewhat of a problem on headers (plus if needed add length to the collector for peak torque... most are too short)

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1