fastest/easy way to set lash(order)hemi? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer fastest/easy way to set lash(order)hemi?

Print Thread

fastest/easy way to set lash(order)hemi? #1037809 07/22/11 12:18 AM 07/22/11 12:18 AM
Joined: Jan 2003 Posts: 8,859 poplar bluff mo. T toplescuda OP I Whine
toplescuda OP I Whine T Joined: Jan 2003 Posts: 8,859 poplar bluff mo.	im fixing to swap out push rods bought some new ones and they came in today what order do you set them in as i forgot i was told by a old hemi racer to bring each piston top dead center then adjust them both as both valves should be closed at that time at 167 bucks for a new set of pushrods i dont want to mess anything up all goes good might get to hear the hemi belch/fart or something tomarrow lol 1970 barracuda convert. 1 of 59 1970 pro street A.A.R. clone (panther pink) 1971 charger 2015 hellcat challenger. Redline red 2014 quad cab 4x4 ram 8 speed hemi

Re: fastest/easy way to set lash(order)hemi? [Re: toplescuda] #1037810 07/22/11 12:24 AM 07/22/11 12:24 AM
Joined: Feb 2007 Posts: 2,315 MOPAR HEADQUARTERS IN ALDEN NY H hemigod426 top fuel
hemigod426 top fuel H Joined: Feb 2007 Posts: 2,315 MOPAR HEADQUARTERS IN ALDEN NY	turn to tdc fire#1 cyl do 2 intakes 2 ext,turn clockwise 180 do 4 more,go 180 again do 4 rockers,go 180degrees and do last 4 done MOPAR OR NO CAR

Re: fastest/easy way to set lash(order)hemi? [Re: toplescuda] #1037811 07/22/11 12:25 AM 07/22/11 12:25 AM
Joined: Jan 2007 Posts: 7,664 IN A ahy master
ahy master A Joined: Jan 2007 Posts: 7,664 IN	I used to use the charts but graduated to the simple method. use a remote starter switch to bump it over until the intake valve is significantly depressed and adjust the exhaust valve. Bump it over again until the exhaust valve is significantly depressed and adjust the intake. Repeat for each cylinder.

Re: fastest/easy way to set lash(order)hemi? [Re: toplescuda] #1037812 07/22/11 11:20 AM 07/22/11 11:20 AM
Joined: Jan 2003 Posts: 4,760 Moved to N.E. Tennessee GomangoCuda master
GomangoCuda master Joined: Jan 2003 Posts: 4,760 Moved to N.E. Tennessee	Quote: im fixing to swap out push rods bought some new ones and they came in today what order do you set them in as i forgot i was told by a old hemi racer to bring each piston top dead center then adjust them both as both valves should be closed at that time at 167 bucks for a new set of pushrods i dont want to mess anything up all goes good might get to hear the hemi belch/fart or something tomarrow lol You need a different mentor. Good thing you asked here also. There are several good ways to do this and then there is your guys wrong way. Here is one way. I do it similar to ahy only I do the exhaust when the intake is almost closed and I do the intake when the exhaust just starts to open. In theory, there is no difference between theory and practice. In practice, there is.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1