|
Test drove my car today , "Video"
#1001546
05/28/11 08:21 PM
05/28/11 08:21 PM
|
Joined: Aug 2009
Posts: 151
Canada BC
Steve Barton
OP
member
|
OP
member
Joined: Aug 2009
Posts: 151
Canada BC
|
Some of you might no, but this is my knew R3 engine, 4 spd car 416 cubs indy heads, 360-2 cnc ported built by rayanj indy intake 1.65 T&D rockers, bullet cam, 700 lift 11.30 comp Diamond pist,scat pro comp lightweight drag crank, 8" adj Advanced clutch ass. clutch and flywheel 25,lbs 4:88 gears 30" x 11.5 DOT M/T E/T radials. No dyno but I'm guessing 600 Hp to the tires Car is 2900 wet me in it. I also have a 250 shot nos for it but have no planes of using it yet.Tube front end coil over, Ladder bar rear, coil over Whats it going to run ? check out the video http://www.youtube.com/watch?v=6bGQlZhqS-w
|
|
|
Re: Test drove my car today , "Video"
[Re: jim sciortino]
#1001551
05/28/11 09:07 PM
05/28/11 09:07 PM
|
Joined: Jun 2010
Posts: 3,112
LONG ISLAND
fishy340
master
|
master
Joined: Jun 2010
Posts: 3,112
LONG ISLAND
|
Quote:
All that driving and not a pimple-faced wiseguy in an import to be found.......pity. 
Gotta go mid 9s, I'd say.
 i agree with Jim
|
|
|
Re: Test drove my car today , "Video"
[Re: Steve Barton]
#1001553
05/28/11 10:33 PM
05/28/11 10:33 PM
|
Joined: Jan 2003
Posts: 4,085
Indiana
W5Duster436
master
|
master
Joined: Jan 2003
Posts: 4,085
Indiana
|
Steve,
Simply awesome and thanks for sharing! What trans are you currently using? There are a few of us here with basically the same exact setup and trying to figure out how to make them live on the street. I am hoping to get mine put back in the car Monday. :-)
Right now I have a McLeod street twin and using the factory a-body 833 but I know it can't handle the power that I have available. I don't want to cut up my car so I think at this point I will probably buy a 5spd from Passon Performance when they are available.
'70 Duster - SDSS 436 W5 4spd (Gone)
'71 Dodge D100
'70 Dodge W100
|
|
|
Re: Test drove my car today , "Video"
[Re: racerx]
#1001555
05/29/11 01:06 AM
05/29/11 01:06 AM
|
Joined: Sep 2009
Posts: 2,325
Clinton Twp... north of Deetro...
Labratt
Good Ol Randy B!
|
Good Ol Randy B!
Joined: Sep 2009
Posts: 2,325
Clinton Twp... north of Deetro...
|
Thanks for the little cruise,Steve! Ya got yourself a REAL runner there! BTW...what RPM was the shift light coming on at?Also..what carb are you running?  Hope you meet your 9-second goal,on motor!  Randy B. 
Last edited by Labratt; 05/29/11 01:08 AM.
|
|
|
Re: Test drove my car today , "Video"
[Re: 72demon416]
#1001558
05/29/11 01:40 AM
05/29/11 01:40 AM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
That was nice. Where abouts in BC are you hiding?
Last edited by Superfreak; 05/29/11 02:01 AM.
|
|
|
Re: Test drove my car today , "Video"
[Re: W5Duster436]
#1001559
05/29/11 01:56 AM
05/29/11 01:56 AM
|
Joined: Aug 2009
Posts: 151
Canada BC
Steve Barton
OP
member
|
OP
member
Joined: Aug 2009
Posts: 151
Canada BC
|
Quote:
Steve,
Simply awesome and thanks for sharing! What trans are you currently using? There are a few of us here with basically the same exact setup and trying to figure out how to make them live on the street. I am hoping to get mine put back in the car Monday. :-)
Right now I have a McLeod street twin and using the factory a-body 833 but I know it can't handle the power that I have available. I don't want to cut up my car so I think at this point I will probably buy a 5spd from Passon Performance when they are available.
I am using an 833 tranny, its an Aluminum over drive case with all the 4 spd guts and built by liberty gears. I had it Super Pro Shifted on 2nd and 3rd gears and just pro shifted on 4th. I shipped it out to Liberty gear in a box they sent it back ready to bolt in for under $1000.00 and that was with an after market aluminum tail housing. They said good for 800 Hp all day long. I have been beating on it for 4 years with just over 400 Hp to the rear tires and has never mist a beat. best 950 dollars I ever spent.
|
|
|
Re: Test drove my car today , "Video"
[Re: Labratt]
#1001560
05/29/11 02:04 AM
05/29/11 02:04 AM
|
Joined: Aug 2009
Posts: 151
Canada BC
Steve Barton
OP
member
|
OP
member
Joined: Aug 2009
Posts: 151
Canada BC
|
Quote:
Thanks for the little cruise,Steve! Ya got yourself a REAL runner there! BTW...what RPM was the shift light coming on at?Also..what carb are you running? Hope you meet your 9-second goal,on motor! Randy B.
Shift light was set at 7000 rpm. The carb I had built by Pro systems, it flows a true 960 it was built for my Eng build. I thought maybe a little small for the power, but pro systems guaranties me this carb will get me to the the end of the track the fastest. ? so fare very impressed.
|
|
|
Re: Test drove my car today , "Video"
[Re: ]
#1001561
05/29/11 02:10 AM
05/29/11 02:10 AM
|
Joined: Aug 2009
Posts: 151
Canada BC
Steve Barton
OP
member
|
OP
member
Joined: Aug 2009
Posts: 151
Canada BC
|
Quote:
That was nice. Where abouts in BC are you hiding?
Vancouver Island in Campbell River. I have to go to the main land to race on a proper 1/4 mile track ( Mission Race way )
|
|
|
Re: Test drove my car today , "Video"
[Re: Steve Barton]
#1001562
05/29/11 02:13 AM
05/29/11 02:13 AM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Quote:
Quote:
That was nice. Where abouts in BC are you hiding?
Vancouver Island in Campbell River. I have to go to the main land to race on a proper 1/4 mile track ( Mission Race way )
When you come over let me know, would love to see the car.
|
|
|
Re: Test drove my car today , "Video"
[Re: Steve Barton]
#1001563
05/29/11 02:15 AM
05/29/11 02:15 AM
|
Joined: Aug 2009
Posts: 151
Canada BC
Steve Barton
OP
member
|
OP
member
Joined: Aug 2009
Posts: 151
Canada BC
|
Quote:
Quote:
Thanks for the little cruise,Steve! Ya got yourself a REAL runner there! BTW...what RPM was the shift light coming on at?Also..what carb are you running? Hope you meet your 9-second goal,on motor! Randy B.
Shift light was set at 7000 rpm. The carb I had built by Pro systems, it flows a true 960 it was built for my Eng build. I thought maybe a little small for the power, but pro systems guaranties me this carb will get me to the the end of the track the fastest. ? so fare very impressed.
Here is a pic of the Carb
|
|
|
Re: Test drove my car today , "Video"
[Re: Steve Barton]
#1001564
05/29/11 09:13 AM
05/29/11 09:13 AM
|
Joined: Dec 2009
Posts: 1,074
detroit, mi
POS Dakota
super stock
|
super stock
Joined: Dec 2009
Posts: 1,074
detroit, mi
|
Quote:
Quote:
Quote:
Thanks for the little cruise,Steve! Ya got yourself a REAL runner there! BTW...what RPM was the shift light coming on at?Also..what carb are you running? Hope you meet your 9-second goal,on motor! Randy B.
Shift light was set at 7000 rpm. The carb I had built by Pro systems, it flows a true 960 it was built for my Eng build. I thought maybe a little small for the power, but pro systems guaranties me this carb will get me to the the end of the track the fastest. ? so fare very impressed.
Here is a pic of the Carb
What does this carb cost ballpark? I hae a 750 annular now, but if my engine wants more I might go with something bigger from Pro Systems. I really like what I hear about them. Never any drama...
|
|
|
|
|
