Quote:
Top end oiling has nothing to do with cylinders firing so if you're rotating it based on firing strokes then you'll likely never see it get oil.
Umm, I may be nuts, but doesnt every crank have to oil in the same position, meaning that a certain set of rockers, or even a single rocker will be in approx the same position?
IE crank spins, feed hole opens, which correlates to a certain rocker(s) position?
Just trying to get close to the crank position when the feed hole will be sending oil to the drivers side.
Last edited by Von; 11/22/10 10:52 PM.
72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72.
Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.
|